소개
This manual provides essential instructions for the setup, operation, and maintenance of your Datalogic Heron HD3130-BK 1D Barcode Scanner. Please read this manual thoroughly before using the device to ensure proper functionality and longevity.
패키지 내용
- Datalogic Heron HD3130-BK 1D Barcode Scanner
- 스캐너 스탠드
- (USB) Connection Cable (sold separately or included depending on package)
- 문서(이 매뉴얼)
Note: The connection cable is required for operation and may be sold separately.
설정
Follow these steps to set up your Datalogic Heron HD3130-BK barcode scanner:
- 스캐너 풀기: Carefully remove the scanner and its stand from the packaging.
- 스탠드 조립: If the stand is not pre-assembled, attach the scanner to the stand base according to the visual guide below. Ensure it is securely fastened.
- 케이블 연결: Insert one end of the USB connection cable into the port at the base of the scanner. Connect the other end of the USB cable to an available USB port on your computer (desktop or laptop).
- 전원 켜기: The scanner is powered via the USB connection. Once connected, it should power on automatically.
- 드라이버 설치(필요한 경우): In most cases, the scanner will be recognized as a standard HID keyboard device and will not require specific driver installation. If prompted, follow your operating system's instructions for new hardware detection.
This image displays the Datalogic Heron HD3130-BK 1D Barcode Scanner in black, positioned on its included stand. The scanner features a sleek, ergonomic design, suitable for both handheld and presentation scanning.
작동 지침
The Datalogic Heron HD3130-BK is designed for efficient 1D barcode scanning. It supports both handheld and presentation modes.
휴대용 스캐닝
- Pick Up the Scanner: Remove the scanner from its stand.
- 조준하고 스캔하세요: Point the scanner's window at the 1D barcode you wish to read. Ensure the red aiming line covers the entire barcode.
- 스캔 확인: A successful scan is typically indicated by an audible beep and/or a visual confirmation (e.g., a green light). The scanned data will be transmitted to your connected computer as keyboard input.
Presentation Scanning (using the stand)
- 항목 배치: Position the barcode of the item in front of the scanner's window while it is in its stand.
- 자동 감지: The scanner will automatically detect and read the barcode when it is presented correctly within its field of view.
- 스캔 확인: A successful scan is indicated by an audible beep and/or visual confirmation.
The scanner is capable of processing approximately 270 scans per second, ensuring quick and efficient data capture.
유지
적절한 유지관리는 스캐너의 수명과 최적의 성능을 보장합니다.
- 청소: 부드럽고 털이 없는 천을 살짝 사용하세요.ampened with water or a mild, non-abrasive cleaner to wipe the scanner's exterior and scan window. Do not use harsh chemicals or abrasive materials.
- 저장: 사용하지 않을 때는 스캐너를 깨끗하고 건조한 곳에 보관하고 직사광선과 극한의 온도를 피하세요.
- 케이블 관리: Avoid bending or twisting the USB cable excessively. Ensure it is not pinched or placed under heavy objects.
문제 해결
If you encounter issues with your Datalogic Heron HD3130-BK scanner, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 스캐너의 전원이 켜지지 않습니다. | USB 케이블이 연결되지 않았거나 결함이 있습니다. | USB 케이블이 스캐너와 컴퓨터에 단단히 연결되어 있는지 확인하세요. 다른 USB 포트나 케이블을 사용해 보세요. |
| 스캐너가 바코드를 읽지 못합니다. | Barcode damaged, incorrect aiming, or scanner settings. | Ensure the barcode is clean and undamaged. Aim the red line directly across the barcode. Check if the scanner is configured for the specific barcode symbology (e.g., UPC-A, Code 39). |
| 스캔한 데이터가 잘못 표시됩니다. | Keyboard layout mismatch or scanner configuration. | Verify your computer's keyboard layout matches the scanner's configured output. Refer to the full product manual for advanced configuration options. |
| 스캐너에서 신호음은 나지만 데이터는 전송되지 않습니다. | Application not in focus or incorrect interface mode. | Ensure the cursor is in the desired input field of your application. Confirm the scanner is operating in HID keyboard emulation mode. |
For more detailed troubleshooting or advanced configuration, please refer to the comprehensive Datalogic Heron HD3130 product manual available on the official Datalogic web대지.
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | HD3130-BK |
| 스캐너 유형 | 1D 바코드 스캐너 |
| 스캔 속도 | 270회 스캔/초 |
| 연결 기술 | USB 케이블 |
| 전원 | 유선 전기(USB를 통해) |
| 호환 장치 | 데스크탑, 노트북 |
| 품목 무게 | 1.28파운드(약 0.58kg) |
| 제품 치수 | 7.5 x 8.8 x 4.1인치(약 19.05 x 22.35 x 10.41cm) |
| 제조업체 | 데이터로직 |
| 국제 무역 식별 번호(GTIN) | 05054629213858 |
보증 및 지원
Datalogic products are designed for reliability and performance. For information regarding product warranty, please refer to the warranty statement included with your purchase or visit the official Datalogic web대지.
For technical support, service, or to inquire about additional accessories, please contact Datalogic customer support through their official channels. You may need your product model number (HD3130-BK) and serial number (if applicable) when contacting support.
온라인 리소스: For the most up-to-date documentation, drivers, and software, please visit the Datalogic Official Web대지.
