1. 안전 정보
경고: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Improper wiring can result in electric shock or fire.
주의: For your safety, read and understand the information provided in this manual completely before attempting to assemble, install, or operate this product. Failure to do so could lead to electric shock, fire, or other injuries that could be hazardous or even fatal.
- 모든 전기 연결은 지역 규정 및 조례는 물론 국가 전기 규격(NEC)을 준수해야 합니다.
- 배선 절차에 대해 확실하지 않은 경우 자격을 갖춘 전기 기술자에게 문의하세요.
- This fixture is ETL Safety Listed and Damp rated for use in bathrooms.
- 전구의 최대 와트 수를 초과하지 마십시오.tage 전구당 60와트.
- Always use the recommended bulb type (Standard A19 with Medium base E-26).
2. 패키지 내용
Carefully unpack the fixture and check that all parts are included. If any part is missing or damaged, do not attempt to assemble, install, or operate the product. Contact customer service for assistance.
- Vanity Light Fixture (Brushed Nickel)
- 3 Frosted Opal Glass Shades
- 장착 하드웨어(나사, 전선 너트, 장착판)
- 사용 설명서
메모: Bulbs are not included. Three 60-watt A19 bulbs with a Medium base (E-26) are required (sold separately).
3. 설정 및 설치
Before beginning installation, ensure the power is turned off at the circuit breaker. This fixture is designed for hardwired installation.
3.1 필요한 도구(포함되지 않음)
- 드라이버(십자 드라이버 및 일자 드라이버)
- 전선 스트리퍼
- 펜치
- 전기 테이프
- 안전 안경
3.2 설치 단계
- 전원 끄기: Locate the circuit breaker or fuse box and turn off the power to the electrical box where the fixture will be installed.
- 장착 표면 준비: Remove any existing fixture and its mounting hardware. Ensure the electrical box is securely mounted and capable of supporting the fixture's weight.
- 장착 플레이트 부착: Secure the provided mounting plate to the electrical box using the screws included in the hardware kit.
- 전기 연결을 만드십시오:
- Connect the bare copper ground wire from the fixture to the ground wire from the electrical box (usually bare copper or green) using a wire nut.
- Connect the white wire from the fixture to the white (neutral) wire from the electrical box using a wire nut.
- Connect the black wire from the fixture to the black (hot) wire from the electrical box using a wire nut.
- Ensure all connections are secure and wrap them with electrical tape for added safety.
- 마운트 고정 장치: 고정장치를 장착판에 조심스럽게 맞추고 제공된 나사를 사용하여 고정합니다.
- 블라인드 설치: Gently attach the three frosted opal glass shades to the fixture.
- 전구 설치: Screw in three 60-watt A19 Medium base (E-26) bulbs (not included) into the sockets.
- 복원력 : 회로 차단기를 다시 켜세요.

Image 1: The Merington 3-Light Vanity Light installed in a bathroom, showcasing its brushed nickel finish and frosted opal shades.

이미지 2: 더 가까이 view of the frosted opal glass shades, highlighting their texture and the brushed nickel fixture.
4. 운영
This vanity light is operated via a standard wall switch (not included). Once installed and powered, simply use the wall switch to turn the light fixture on or off.
- 조명 방향: The fixture can be installed with the shades facing up or down, depending on your preference and desired lighting effect.
- 전구 교체: To replace bulbs, ensure the power is off at the circuit breaker. Allow bulbs to cool before touching. Unscrew old bulbs and screw in new ones of the correct type and wattage.
Video 1: A demonstration of the Allen + Roth Merington Bathroom Vanity Light in operation, highlighting its elegant illumination and design.
5. 유지관리
Regular maintenance will help preserve the appearance and functionality of your vanity light fixture.
- 청소: Turn off power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- 그늘 관리: The frosted opal glass shades can be gently wiped with a damp cloth. Ensure they are completely dry before restoring power.
- 점검: 모든 전기 연결부와 장착 하드웨어의 조임 상태를 주기적으로 점검하십시오.
6. 문제 해결
화장대 조명에 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 조명이 켜지지 않습니다. |
|
|
| 빛이 깜박입니다. |
|
|
| 고정장치가 윙윙거린다. |
|
|
If the problem persists after trying these solutions, consult a qualified electrician or contact customer support.
7. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델명 | Merington 3-Light |
| 모델 번호 | VBS271-3BNK |
| 상표 | 앨런 + 로스 |
| 유형 | 허영 라이트 바 |
| 조명의 수 | 3 |
| 고정물 마무리 | 브러시드 니켈 |
| 그늘 소재 | Frosted Opal Glass |
| 고정 재료 | 금속 |
| 치수(길이 x 너비 x 높이) | 21.5 x 5.5 x 9 인치 |
| 품목 무게 | 6.6파운드 |
| 전원 | 하드와이어드 |
| 권tage | 120 볼트 |
| 최대 전구 와트tage | 60와트 (전구당) |
| 전구 베이스 유형 | Medium base (E-26) |
| 권장 전구 모양 | A19 |
| 밝기 조절 가능 | 아니요 |
| 사용 평가 | Damp rated (suitable for bathrooms) |
| 안전 목록 | ETL 등록됨 |
| 한국어: | 080629712713 |
8. 보증 및 지원
보증 정보나 기술 지원에 대해서는 제조업체의 공식 웹사이트를 참조하십시오. web해당 사이트를 방문하거나 고객 서비스 부서에 문의하세요. 보증 청구를 위해 구매 영수증을 보관하세요.
제조업체: 앨런 + 로스
반품 정책: This product typically has a 30-day return/replacement policy. Please check with your retailer for specific return terms.