CJ Tech F00524 풀모션 TV 벽걸이 마운트 사용 설명서

1. 서론

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your CJ Tech F00524 Full Motion TV Wall Mount. Please read this manual thoroughly before installation to ensure correct setup and to prevent damage to the product or injury to yourself.

The CJ Tech F00524 is designed to securely mount flat panel televisions ranging from 32 to 65 inches, supporting a maximum weight of 60 kg (132 lbs). It offers full motion capabilities, including swivel and tilt, to optimize your view경험.

2. 안전 정보

WARNING: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of your warranty.

• Do not begin installation until you have read and understood all instructions and warnings contained in this manual. If you have any questions, contact customer support.
• The wall mount must be installed by qualified personnel. Improper installation can cause serious injury.
• Ensure the mounting surface can safely support the combined weight of the mount and the television. The wall must be capable of supporting at least four times the weight of the TV and mount.
• 최대 중량 용량 60kg(132파운드)을 초과하지 마십시오.
• Use only the mounting hardware provided. Do not use the mount for any purpose not expressly specified by the manufacturer.
• Always check for electrical wires, water pipes, and gas lines in the wall before drilling.
• 이 제품에는 삼키면 질식 위험이 있는 작은 품목이 들어 있습니다. 이 품목은 어린이의 손이 닿지 않는 곳에 보관하세요.

3. 패키지 내용

설치하기 전에 모든 구성품이 있는지, 손상되지 않았는지 확인하십시오. 부품이 누락되었거나 불량인 경우 설치를 진행하지 말고 고객 지원 센터에 문의하십시오.

• 벽판 조립체
• TV 브래킷 암 (2)
• 장착 하드웨어 키트(나사, 앵커, 와셔, 스페이서)
• 사용자 설명서

이미지 1: 이상view of the CJ Tech F00524 Full Motion TV Wall Mount components. This image displays the main wall plate assembly and the two TV bracket arms, along with some of the included mounting hardware.

4. 설정 및 설치

Tools Required (not included): Pencil, Stud Finder, Drill, Drill Bits, Level, Phillips Head Screwdriver, Socket Wrench.

4.1단계: 장착 위치 선택

• Determine the desired height and position for your TV.
• Use a stud finder to locate the center of two adjacent wooden studs in the wall. Mark these locations. For concrete or brick walls, ensure the wall is solid and use appropriate anchors (not always included, consult a professional).

4.2단계: 벽판을 벽에 부착

• Position the wall plate assembly against the wall at your marked locations. Use a level to ensure it is perfectly horizontal.
• 벽판에 있는 구멍을 통해 드릴링 지점을 표시하세요.
• Drill pilot holes at the marked locations. The drill bit size will depend on your wall type and the provided lag bolts/anchors.
• Secure the wall plate to the wall using the provided lag bolts and washers. Tighten firmly, but do not overtighten.

4.3단계: TV 브래킷을 TV에 부착

• 화면 손상을 방지하기 위해 TV를 부드럽고 깨끗한 표면에 화면이 아래로 향하도록 조심스럽게 놓으십시오.
• TV 뒷면에 있는 VESA 장착 구멍을 확인하세요.
• Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's VESA pattern. The mount accommodates VESA patterns up to 600x400 mm.
• Attach the two TV bracket arms to the back of your TV. Ensure the hooks on the bracket arms are facing upwards and the arms are centered and level. Do not overtighten the screws.

4.4단계: TV를 벽면 고정판에 장착합니다.

• 다른 사람의 도움을 받아 부착된 브래킷을 이용해 TV를 조심스럽게 들어 올리십시오.
• Hook the TV bracket arms onto the wall plate. Ensure both arms are securely seated on the wall plate.
• Locate the safety screws or locking mechanisms on the bottom of the TV bracket arms. Tighten these to secure the TV to the wall plate and prevent accidental dislodgement.

이미지 2: 전ample of the CJ Tech F00524 Full Motion TV Wall Mount installed with a television. This image demonstrates the mount's low-profile design and how it appears when a TV is attached to the wall.

5. 마운트 작동

The CJ Tech F00524 Full Motion TV Wall Mount allows for flexible view각도를 나타냅니다.

• 받침: 거치대는 수평으로 최대 180도(TV 크기와 벽면 간격에 따라 좌우 90도)까지 회전할 수 있습니다. TV를 원하는 각도로 부드럽게 밀거나 당기세요.
• 경사: The mount allows for a tilt range from -15 degrees to +15 degrees. Loosen the tilt adjustment knobs on the TV bracket arms, adjust the TV to the desired vertical angle, and then retighten the knobs to secure the position.

TV를 조절할 때는 항상 천천히 조심스럽게 하십시오. 갑작스러운 움직임이나 과도한 힘을 가하지 마십시오.

6. 유지관리

• 청소: 부드럽고 마른 천으로 마운트를 닦으세요. 연마성 세제나 용제를 사용하지 마세요.
• 정기 점검: Periodically inspect the mount and all connection points to ensure they remain secure. Retighten any loose screws or bolts.
• 매끄럽게 하기: 마운트의 움직이는 부품은 부드러운 작동을 위해 설계되었으며 일반적으로 윤활유가 필요하지 않습니다. 움직임이 뻑뻑해지면 고객 지원팀에 문의하십시오.

7. 문제 해결

• TV가 수평이 아닙니다: Ensure the wall plate is level before securing it to the wall. Some mounts have fine-tuning level adjustments on the TV brackets; consult the specific design of your mount. If not, you may need to slightly adjust the wall plate.
• 기울기/회전 조절에 어려움이 있습니다. Check if any adjustment knobs or screws are overtightened. Loosen them slightly to allow movement, then retighten once the desired position is achieved. Ensure no cables are obstructing movement.
• 산이 불안정하다고 느껴집니다: Immediately remove the TV from the mount. Recheck all installation steps, especially the wall attachment and TV bracket attachment. Ensure all bolts are securely tightened and the wall structure is adequate. Do not remount the TV until stability is confirmed.

8. 사양

9. 보증 정보

CJ Tech products are manufactured to high-quality standards. This product is covered by a limited warranty against defects in materials and workmanship. Specific warranty terms and duration may vary by region and retailer. Please retain your proof of purchase for warranty claims.

For detailed warranty information, please refer to the warranty card included with your product or contact CJ Tech customer support.

10. 지원

If you encounter any issues during installation or operation, or if you have questions regarding your CJ Tech F00524 Full Motion TV Wall Mount, please contact CJ Tech customer support. Support contact information can typically be found on the product packaging, the official CJ Tech web사이트나 소매업체를 통해 구매할 수 있습니다.

When contacting support, please have your product model number (F00524) and proof of purchase ready.