소개
Thank you for choosing the DS18 PRO-X6M 6.5-inch Midrange Loudspeaker. This product is engineered to deliver high-quality audio performance for your car or truck stereo sound system. This manual provides essential information for the proper installation, operation, and maintenance of your new loudspeaker.
The PRO-X6M is designed to handle the critical midrange frequencies, providing clear and detailed sound for both instrumentals and vocals. It features a robust construction with a 1.5-inch high-temperature CCAW voice coil and high-strength Ferrite magnets, ensuring durability and consistent performance even at high volumes.
상자 안에 무엇이 들어있나요?
- DS18 PRO-X6M 6.5-inch Midrange Loudspeaker (1 unit)
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델명 | PRO-X6M |
| 스피커 크기 | 6.5 인치 |
| 스피커 유형 | 미드레인지 확성기 |
| 임피던스 | 8옴 |
| 최대 전력 처리 | 450와트 |
| RMS 전력 처리 | 225와트 |
| 주파수 응답 | 17000Hz |
| 신호 대 잡음 비율 | 95데시벨 |
| 음성 코일 | 1.5" High-Temperature CCAW |
| 자석 소재 | High-Strength Ferrite |
| 제품 치수 | 2.44인치 깊이 x 6.5인치 너비 x 2.71인치 높이 |
| 품목 무게 | 1.87파운드(850.49그램) |
| 장착 유형 | 자동차 마운트 |
| 재료 | Paper Cone, Satin Black Aluminum Basket |
| 색상 | 권위 있는 |
설정 및 설치
Professional installation is recommended for optimal performance and to prevent damage to your vehicle or the loudspeaker. Always disconnect the vehicle's battery before beginning any electrical work.
안전 예방 조치:
- Ensure the vehicle's electrical system is off.
- Wear appropriate safety gear (gloves, eye protection).
- Verify correct wiring polarity to avoid damage to the speaker and amp리퍼.
- Do not over-tighten mounting screws, as this can damage the speaker frame.
설치:
- Choose a suitable mounting location in your car doors or custom enclosures. Ensure sufficient mounting depth (2.44 inches) and clearance for the speaker.
- Use the provided template (if applicable) or measure carefully to mark the cut-out area (Front Mount Baffle Cut Out: 5.7" / 145mm) and screw holes.
- Cut the opening and drill pilot holes for the mounting screws.
- Carefully place the loudspeaker into the opening.
- Secure the speaker using appropriate screws, ensuring a snug fit without excessive force.
배선:
- Connect the positive (+) terminal of the loudspeaker to the positive (+) output of your amp리퍼.
- Connect the negative (-) terminal of the loudspeaker to the negative (-) output of your amp리퍼.
- 모든 연결 부분이 안전하고 절연되어 있는지 확인하여 단락을 방지하세요.
- Match the impedance (8 Ohms) of the loudspeaker to your amplifier's capabilities for optimal performance and to prevent damage.
- 귀하의 것을 확인하십시오 amplifier's RMS power output is within the speaker's RMS rating (225W) to avoid overpowering or underpowering.
Operating Your Loudspeaker
Once installed, gradually increase the volume and adjust your audio system's settings (equalizer, crossover points) to achieve your desired sound. Midrange speakers are typically used in conjunction with tweeters and subwoofers to create a full-range sound system. Proper crossover settings are crucial to protect the speaker and optimize sound quality.
- 크로스오버 설정: For midrange speakers, it is recommended to use a high-pass filter (HPF) to prevent low bass frequencies from reaching the speaker, which can cause distortion and damage. Consult your amplifier or head unit manual for recommended crossover settings.
- 이득 조정: 설정하다 amp출력 볼륨에 맞게 lifier 이득을 올바르게 조정합니다.tage of your head unit. Incorrect gain settings can lead to distortion and speaker damage.
- 청취 수준: While the PRO-X6M is designed for high output, prolonged listening at extremely high, distorted volumes can cause hearing damage and speaker failure.
유지
The DS18 PRO-X6M loudspeaker requires minimal maintenance. Keep the speaker cones free from dust and debris. Use a soft, dry cloth to clean the speaker's surface. Avoid using harsh chemicals or abrasive cleaners.
- 정기적으로 배선 연결 부위의 견고성과 부식 여부를 점검하세요.
- Ensure the speaker is not exposed to excessive moisture or extreme temperatures, as it is not water-resistant.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 스피커에서 소리가 나지 않음 | 배선이 느슨하거나 올바르지 않음 Amplifier off or in protect mode; Speaker damaged | Check all wiring connections; Verify amplifier status; Test speaker with another known good source |
| 왜곡된 소리 | Overpowering speaker; Incorrect gain settings; Improper crossover settings; Damaged speaker | Reduce volume/gain; Adjust amplifier gain; Correct crossover settings; Inspect speaker for physical damage |
| 약하거나 먹먹한 소리 | Incorrect polarity; Speaker phase issue; Low power input | Check wiring polarity; Ensure all speakers are in phase; Verify amplifier output and speaker impedance match |
시각 보조 자료
그림 1: 앞쪽 view of the DS18 PRO-X6M 6.5-inch Midrange Loudspeaker.
그림 2: DS18 PRO-X6M Loudspeaker highlighting power handling (250W RMS / 500W Max), non-pressed paper cone, and satin black aluminum basket.
그림 3: The PRO-X6M loudspeaker shown installed in a car door, illustrating its suitability for car audio and pro audio applications. Details on magnet material (Ferrite, 30 oz) and mounting depth (2.58" / 65.5mm) are also visible.
그림 4: Detailed dimensions of the DS18 PRO-X6M, including overall diameter (6.57" / 167mm), mounting depth (2.58" / 65.5mm), and front mount baffle cut out (5.7" / 145mm).
동영상 1 : An official product video from DS18Sound showcasing the DS18 PRO-X6M Loudspeaker, highlighting its features and design.
동영상 2 : 짧은 사전view video from the merchant demonstrating the DS18 PRO-X6M Loudspeaker.
동영상 3 : An official video from DS18 highlighting the PRO-X Series, emphasizing its legacy in high-volume audio performance.
보증 및 지원
The DS18 PRO-X6M Loudspeaker comes with a limited warranty. For specific warranty details and duration, please refer to the warranty card included with your product or visit the official DS18 website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact DS18 customer service.
구매를 고려해 보실 수도 있습니다.asing extended protection plans for your product. Options such as 2-Year, 3-Year, or Complete Protect plans may be available to cover eligible purchases.
DS18 연락처 정보: 방문해주세요 아마존 DS18 스토어 아니면 그들의 공식 web최신 연락처 정보는 사이트에서 확인하세요.
