소개
Thank you for choosing the DS18 PRO-X6BM 6.5" Midrange Loudspeaker. This manual provides essential information for the proper installation, operation, and maintenance of your new speaker. Designed for high-quality audio reproduction, the PRO-X6BM delivers clear and powerful midrange sound for your car or truck stereo system.
제품 특징
- 중급 성능: Engineered to handle the crucial mid-range frequencies of the audible sound spectrum, providing excellent clarity for instrumentals and vocals.
- 고성능 처리: Delivers an impressive 500W Max Power and 250W RMS at 8 Ohms, suitable for a wide range of audio setups.
- 내구성이 뛰어난 보이스 코일: Features a 1.5" high-temperature CCAW voice coil designed for extreme heat resistance and long-term structural integrity.
- 강화된 사운드: Upgrade your existing stereo system with a speaker that provides superior midrange detail compared to stock options.
- Integrated Bullet Dust Cover: Includes a specially designed bullet dust cover to protect the voice coil and optimize sound output.
명세서
| 특징 | 세부 사항 |
|---|---|
| 유형 | Midrange Loudspeaker with Bullet |
| 크기 | 6.5인치 |
| RMS 전원 | 250와트 |
| 최대 힘 | 500와트 |
| 주파수 응답 | 118-17kHz |
| 임피던스 | 8옴 |
| 감광도 | 90데시벨 |
| 보이스 코일 크기 | 1.5인치 |
| 자석 크기 | 30 온스 |
| 장착 깊이 | 2.72인치(69mm) |
| 컷아웃 치수 | 5.7인치(145mm) |
| Material (Cone) | 비압착 종이 콘 |
| 소재(프레임) | 레드 스틸 바구니 |
| Material (Surround) | 천 가장자리 |
| 포함된 구성 요소 | 1 스피커를 X |
설정 및 설치
Proper installation is crucial for optimal performance and longevity of your DS18 PRO-X6BM loudspeaker. It is recommended to have this product installed by a professional car audio technician.
필요한 도구 및 재료 :
- 드라이버 세트
- 와이어 스트리퍼/크림퍼
- 드릴 작업 (맞춤형 장착이 필요한 경우)
- 스피커 케이블 (시스템에 맞는 적절한 굵기)
- Connectors (spade terminals, butt connectors, etc.)
- Mounting hardware (screws, clips - typically included)
- Sound deadening material (optional, for improved audio quality)
설치 단계:
- 안전이 최우선입니다. 단락을 방지하기 위해 전기 작업을 시작하기 전에 차량 배터리의 음극 단자를 분리하십시오.
- 장착 위치 선택: Identify suitable locations in your vehicle (e.g., door panels, rear deck) that accommodate the speaker's dimensions (6.5" diameter, 2.72" mounting depth). Ensure there is sufficient clearance behind the speaker.
- 장착 표면 준비: If replacing existing speakers, remove the old units. If creating new openings, carefully mark and cut the speaker holes according to the cut-out dimension (5.7" / 145mm).
- 배선: Connect the speaker wires to the terminals on the PRO-X6BM. Ensure correct polarity (positive to positive, negative to negative) to avoid phase issues. Use appropriate connectors for secure connections.
- 보안 스피커: Place the speaker into the mounting opening and secure it using the provided screws. Do not overtighten.
- 연결하기 Amplifier/Head Unit: 스피커 선을 다음 위치로 연결하세요. amplifier or head unit. Connect them according to your audio system's wiring diagram. The PRO-X6BM has an 8 Ohm impedance.
- 테스트 시스템 : Reconnect the vehicle's negative battery terminal. Turn on your audio system and test the speakers at a low volume. Gradually increase the volume to ensure proper operation and sound quality.
작동 지침
Once installed, your DS18 PRO-X6BM loudspeaker is ready for use. Follow these guidelines for optimal audio experience:
- 침입 기간: Allow a break-in period of approximately 10-20 hours of normal listening at moderate volumes. This allows the speaker's suspension to loosen up, improving overall sound quality and longevity.
- 볼륨 조절: Always start with a low volume and gradually increase it. Avoid excessive volume levels that cause audible distortion, as this can damage the speakers and your hearing.
- 이퀄라이제이션(EQ): Adjust your head unit or amplifier's equalizer settings to fine-tune the sound to your preference. The PRO-X6BM excels in midrange frequencies, so focus on enhancing those without overdriving the speaker.
- 크로스오버 설정: 외부를 사용하는 경우 amplifier with crossover settings, it is recommended to set a high-pass filter (HPF) to protect the midrange speaker from low bass frequencies it is not designed to reproduce. Consult your amplifier's manual for recommended settings.
유지
To ensure the longevity and optimal performance of your DS18 PRO-X6BM loudspeakers, follow these simple maintenance tips:
- 정기 청소: 스피커 콘과 주변부를 부드럽고 마른 천으로 살살 닦아 먼지와 이물질을 제거하십시오. 강한 화학 약품이나 과도한 습기는 사용하지 마십시오.
- 연결 검사: Periodically check all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to poor sound quality or speaker damage.
- 과도한 힘을 피하세요: Do not continuously play music at distortion-inducing volumes. This can overheat the voice coil and lead to permanent damage.
- 환경 보호: While designed for automotive use, avoid exposing speakers to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
문제 해결
If you experience issues with your DS18 PRO-X6BM loudspeaker, refer to the following troubleshooting guide:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 스피커에서 소리가 나지 않습니다 | 느슨하거나 연결이 끊어진 배선 amplifier off or in protect mode; incorrect head unit settings; damaged speaker. | Check all speaker wire connections for tightness and correct polarity. Verify amplifier is powered on and not in protect mode. Ensure head unit balance/fader settings are correct. Test speaker with another known good audio source or speaker. |
| 왜곡된 소리 | Volume too high; incorrect amplifier gain settings; improper crossover settings; damaged speaker. | 볼륨을 줄이세요. 조절하세요. amplifier gain settings to prevent clipping. Verify high-pass filter (HPF) is set correctly to prevent bass frequencies from reaching the midrange speaker. Inspect speaker cone for physical damage. |
| 약하거나 먹먹한 소리 | Incorrect wiring polarity; poor speaker placement; EQ settings. | Double-check speaker wire polarity. Ensure speakers are not obstructed. Adjust EQ settings on your head unit or amplifier to enhance midrange frequencies. |
보증 및 지원
DS18 products are designed for durability and performance. For specific warranty details, please refer to the documentation included with your product or visit the official DS18 website. General warranty information includes:
- 한정된 보증: This product typically comes with a limited manufacturer's warranty.
- 반품 정책: Products purchased may be eligible for a 30-day refund or replacement policy.
- 확장 보호 계획: 보장 기간을 연장할 수 있는 2년 및 3년 추가 보장 플랜을 선택적으로 구매하실 수 있습니다.
For technical support, troubleshooting assistance, or warranty claims, please contact DS18 customer service through their official channels.
