Electro-Voice EKX15 15인치 2웨이 풀레인지 1600W 패시브 스피커 사용 설명서

1. 서론

This manual provides essential information for the safe and efficient use of your Electro-Voice EKX15 passive loudspeaker. The EKX15 is a high-performance, full-range loudspeaker designed for professional sound reinforcement applications. It combines robust construction with advanced acoustic design to deliver clear and powerful audio.

2. 주요 특징

• 고성능 처리: 1600 W peak power, delivering 132 dB peak SPL.
• EV-Patented SST Waveguide: Signal Synchronized Transducers (SST) waveguide design ensures precise and consistent coverage.
• 내구성 있는 구조: Lightweight, compact 15-mm wood enclosure with internal bracing and a durable EVCoat finish.
• 다양한 장착: Eight M10 threaded mounting points, aluminum pole mounts, and all-metal handles for flexible setup.
• 최적화된 적용 범위: 90° x 60° pattern for optimal coverage on mid-size stages, with a 40° monitor angle and rubber feet.

3. 설정

The EKX15 is a passive loudspeaker and requires an external amp앰프 작동을 확인하십시오. amplifier is capable of delivering sufficient power to the speaker without clipping.

3.1 풀기 및 검사

스피커를 포장에서 조심스럽게 꺼내십시오. 배송 중 발생했을 수 있는 손상 흔적이 있는지 제품을 검사하십시오. 손상이 발견되면 즉시 판매점에 문의하십시오.

3.2 배치

The EKX15 can be used in various configurations:

• 극 산: Utilize the integrated pole mount socket for stand-alone applications.
• 플로어 모니터: The cabinet design allows for use as a floor monitor with a 40° angle.
• 보류: Use the M10 threaded mounting points for suspended installations. Consult a qualified professional for rigging.

4. 연결

Connect the EKX15 to your external amplifier using high-quality speaker cables. The speaker features two NL4 (Speakon-compatible) connectors for input and parallel output. Ensure proper polarity when making connections.

4.1 연결 Amp리퍼

1. 귀하의 것을 확인하십시오 amp연결을 하기 전에 lifier를 꺼야 합니다.
2. 스피커 케이블을 연결하세요. amplifier's output to one of the NL4 input connectors on the EKX15.
3. If connecting multiple passive speakers, you can use the parallel output connector on the EKX15 to link to another speaker. Ensure the total impedance matches your ampLifier의 능력.

4.2 케이블 요구 사항

Use professional-grade speaker cables with appropriate gauge for the length of the run and power requirements. Avoid using instrument cables for speaker connections.

5. 운영

Once connected to a suitable amplifier, the EKX15 is ready for operation. Always ensure your amplifier's volume is set to minimum before powering on to prevent sudden loud noises.

5.1 전원 켜기

1. 모든 연결이 안전한지 확인하세요.
2. Turn on your audio source (mixer, etc.).
3. Turn on your external amp리퍼.
4. 점차적으로 증가시키다 amp앰프의 볼륨을 원하는 청취 수준으로 조절하세요.

5.2 전원 끄기

1. 감소 amplifier's volume to minimum.
2. 끄다 amp리퍼.
3. Turn off your audio source.

6. 유지관리

Regular maintenance ensures the longevity and optimal performance of your EKX15 loudspeaker.

6.1 청소

Clean the cabinet with a soft, dry cloth. Do not use abrasive cleaners or solvents. The grille can be gently vacuumed to remove dust.

6.2 보관

When not in use, store the loudspeaker in a dry, temperature-controlled environment. If transporting, use appropriate protective covers or cases.

7. 문제 해결

If you encounter issues with your EKX15, refer to the following common troubleshooting steps:

• 소리 없음: Check all cable connections (speaker to amplifier, source to amplifier). Ensure the amplifier is powered on and its volume is up. Verify the audio source is active.
• 왜곡된 소리: 볼륨을 줄이세요 amplifier and audio source. Ensure the amplifier is not clipping (indicated by a clip LED). Check for damaged speaker cables.
• 간헐적인 소리: Inspect all cables for loose connections or damage. Try swapping cables to isolate the issue.

If the problem persists after performing these checks, contact Electro-Voice customer support or a qualified service technician.

8. 사양

9. 보증 및 지원

The Electro-Voice EKX15 loudspeaker comes with a Limited Warranty. For detailed warranty information, service, or technical support, please refer to the official Electro-Voice web사이트를 방문하거나 공인 딜러에게 문의하세요.

온라인 리소스: Visit the Electro-Voice Store on Amazon