Stanley FATMAX FMHT0-62689 Ratchet Screwdriver with LED and 12 Bits User Manual

1. 서론

Thank you for choosing the Stanley FATMAX FMHT0-62689 Ratchet Screwdriver. This versatile tool is designed for efficient fastening and loosening of screws, featuring a robust ratchet mechanism, an integrated LED light for improved visibility, and a convenient storage system for 12 interchangeable bits. This manual provides essential information for safe operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your tool.

2. 안전 정보

Always observe basic safety precautions when using hand tools to reduce the risk of injury. Read and understand all instructions before use.

• 공구를 작동할 때는 안전 안경과 같은 적절한 개인 보호 장비를 착용하십시오.
• 작업 구역을 깨끗하고 밝게 유지하세요. 어수선하거나 어두운 구역은 사고를 초래합니다.
• 과도하게 사용하지 마십시오. 항상 적절한 발판과 균형을 유지하십시오.
• Ensure the bit is securely seated in the holder before applying torque.
• 도구를 원래 용도 이외의 다른 용도로 사용하지 마십시오.
• 공구를 작동하는 동안 어린이와 구경꾼이 접근하지 못하도록 하십시오.
• 도구는 어린이의 손이 닿지 않는 건조하고 안전한 곳에 보관하세요.

3. 패키지 내용

포장을 풀 때 모든 품목이 있는지 확인하세요.

• 1 x Stanley FATMAX Ratchet Screwdriver with LED
• 12 x Interchangeable Bits

4. 제품 특징

• 40-Tooth Ratchet Mechanism: Provides high torque capacity and a fine 9-degree recovery angle for efficient fastening in tight spaces.
• 3 Ratchet Positions: Easily switch between screwing (forward), locking, and unscrewing (reverse) with a simple button press.
• Integrated LED System: A 3.5 lumen LED light illuminates the work area, powered by 3 easy-to-change AG3 batteries.
• Double Magnetic Bit Retention: Ensures secure attachment of the bit to the holder and the holder to the handle, preventing accidental dislodgement.
• 이중 소재 손잡이: Ergonomic grip for comfort and enhanced control during use.
• On-board Bit Storage: Conveniently stores the 12 included bits within the handle.

5. 설정

5.1. Inserting and Changing Bits

1. To access the bits, pull the end cap of the handle to reveal the bit storage cartridge.
2. Select the desired bit from the cartridge.
3. Insert the selected bit firmly into the magnetic bit holder at the end of the screwdriver shaft. The magnetic retention will secure the bit.
4. To store bits, place them back into the cartridge and push the cartridge firmly into the handle until it clicks into place.

Image: Accessing and storing bits within the screwdriver handle.

5.2. LED 조명 켜기

The LED light is activated by pressing the red button located near the bit holder. Press once to turn on, press again to turn off.

Image: Close-up of the LED activation button and ratchet selector.

5.3. Changing LED Batteries

The LED light is powered by 3 AG3 batteries. To replace them:

1. Locate the protective part around the LED light assembly.
2. Carefully unscrew or unclip this part to access the battery compartment.
3. Remove the old AG3 batteries and insert new ones, ensuring correct polarity.
4. Reassemble the protective part securely.

6. 사용 설명서

6.1. 래칫 메커니즘 사용

The ratchet mechanism allows for continuous turning without repositioning the hand, increasing efficiency. The selector ring near the bit holder controls the ratchet direction.

Image: Ratchet mechanism selector.

• Forward (Screwing): Rotate the selector to the 'R' (Right) position for clockwise rotation. The screwdriver will engage when turning clockwise and freewheel when turning counter-clockwise.
• Reverse (Unscrewing): Rotate the selector to the 'L' (Left) position for counter-clockwise rotation. The screwdriver will engage when turning counter-clockwise and freewheel when turning clockwise.
• 잠김: Rotate the selector to the 'O' (Off) or center position to lock the shaft. This converts the tool into a traditional fixed screwdriver for maximum torque or precise control.

6.2. LED 조명 사용

Press the red button on the screwdriver head to activate the LED light. This feature is useful for illuminating dark work areas, such as inside cabinets or under furniture, improving visibility and precision.

Image: Screwdriver LED light in use.

7. 유지관리

• 청소: Wipe the screwdriver and bits with a clean, dry cloth after each use. Do not use harsh chemicals or abrasive cleaners.
• 저장: Store the screwdriver and all bits in a dry environment to prevent rust and corrosion. Ensure bits are securely stored within the handle.
• 비트 상태: Regularly inspect bits for wear or damage. Replace worn bits to maintain optimal performance and prevent damage to fasteners.
• 배터리 교체: Replace the AG3 batteries for the LED light as needed (refer to Section 5.3). Remove batteries if the tool will not be used for an extended period to prevent leakage.

8. 문제 해결

• LED 조명이 작동하지 않음: Check if the batteries are correctly inserted and not depleted. Replace batteries if necessary (AG3 type).
• Bits Not Holding Securely: Ensure the bit is fully inserted into the magnetic holder. Clean any debris from the bit holder or bit shank that might interfere with the magnetic connection.
• 래칫 메커니즘 걸림 현상: Ensure the selector ring is fully engaged in one of the three positions (forward, reverse, or locked). Clean any dust or debris from the mechanism. Do not force the mechanism.
• Difficulty Inserting/Removing Bits from Storage: Ensure the bit cartridge is aligned correctly. If bits are stiff, gently wiggle them while pulling or pushing.

9. 사양

10. 보증 및 지원

This Stanley FATMAX product comes with a 2년 제조사 보증. For warranty claims, technical support, or spare parts availability, please contact your retailer or visit the official Stanley FATMAX web사이트. 보증 확인을 위해 구매 증빙 자료를 보관하세요.