소개
This manual provides comprehensive instructions for the safe and efficient use of your Leitz 5530 manual stapler. Please read this guide thoroughly before operating the device to ensure proper function and longevity.
안전 지침
- 작업 중에는 부상을 방지하기 위해 스테이플러 작동 장치에 손가락이 닿지 않도록 하십시오.
- Use only staples of the correct size and type recommended for the Leitz 5530 stapler.
- Do not attempt to staple materials thicker than the stapler's maximum capacity.
- Keep the stapler out of reach of children.
- Avoid dropping the stapler, as this may damage its internal components.
패키지 내용
- 1 x Leitz 5530 Manual Stapler (Black)
제품 끝view
Familiarize yourself with the components of your Leitz 5530 stapler.
그림 1: 각도 view of the Leitz 5530 manual stapler, showcasin컴팩트한 디자인과 블랙 마감이 특징입니다.
그림 2: 측면 view of the Leitz 5530 manual stapler, illustrating its ergonomic shape and staple exit point.
그림 3: 상단 view of the Leitz 5530 manual stapler, highlighting the "PUSH" button for staple loading and the "OPEN" latch for the staple channel.
Setup: Loading Staples
- Locate the "PUSH" button on the top rear of the stapler (refer to Figure 3).
- Press the "PUSH" button firmly to release the staple channel. The top cover will spring open.
- Pull the staple channel completely out until it locks into place.
- Insert a strip of Leitz 24/6 or 26/6 staples into the channel with the staple points facing downwards.
- Push the staple channel back into the stapler until it clicks securely into place.
- Close the top cover until it latches.
이제 스테이플러를 사용할 준비가 되었습니다.
작동 지침
- 스테이플러로 묶을 서류들을 모아서 가지런히 정렬하세요.
- Insert the papers into the stapler's throat, positioning them where you want the staple to be placed.
- Press down firmly and evenly on the top of the stapler until the staple penetrates the paper and clinches underneath.
- Release the stapler. The stapled papers can now be removed.
Do not force the stapler if it encounters resistance, as this may cause jams or damage.
유지
스테이플 걸림 제거
- If a staple jam occurs, first remove any paper from the stapler.
- Open the staple channel as described in the "Loading Staples" section.
- Carefully remove any bent or jammed staples from the channel using tweezers or a small, flat tool. Be cautious to avoid injury.
- Ensure the staple channel is clear before reloading new staples and closing the stapler.
청소
Wipe the exterior of the stapler with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Staples not feeding | Staple channel empty or jammed. | Reload staples or clear any jams (see Maintenance). |
| Staples bending or not clinching | Incorrect staple size, too many papers, or misaligned papers. | Ensure correct staple size (24/6 or 26/6), reduce paper stack, or align papers properly. |
| Stapler feels stiff or difficult to press | Mechanism may be dirty or jammed. | Clear any visible debris. If persistent, contact support. |
명세서
| 상표 | 라이츠 |
| 모델 번호 | 55300095 |
| 제품 치수 | 14.5 x 6 x 8cm (대략) |
| 품목 무게 | 100g |
| 색상 | 검은색 |
| 작동 모드 | 수동 |
| 호환 스테이플 | Leitz 24/6 or 26/6 |
보증 및 지원
For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Leitz web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
For further assistance, please contact Leitz customer service.