Mastervolt Mass 24/50-2 자동 배터리 충전기 사용 설명서

1. 서론

This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your Mastervolt Mass 24/50-2 Automatic Battery Charger. The Mastervolt Mass series is engineered for robust performance in professional, semi-professional, and recreational environments, ensuring a reliable power supply under various conditions. Please read this manual thoroughly before installation and use.

2. 안전 정보

중요 안전 지침:

• Always read and understand all instructions before installing or operating the charger.
• Installation must be performed by qualified personnel in accordance with all applicable electrical codes and standards.
• Ensure adequate ventilation around the charger to prevent overheating.
• Do not operate the charger near flammable materials or in areas where explosive gases may accumulate.
• Disconnect all power sources before performing any maintenance or making connections.
• Avoid contact with battery acid and wear appropriate personal protective equipment.
• This charger is designed for specific battery types and voltages. Verify compatibility before connecting.

3. 제품 오버view

The Mastervolt Mass 24/50-2 is an automatic battery charger known for its reliability and long operational lifespan. It incorporates Mastervolt's "Green by Heart" program, which focuses on efficient energy use and faster battery charging, even with limited input current. The unit is designed for easy integration and replacement due to consistent dimensions and connections across product generations.

Figure 1: Mastervolt Mass 24/50-2 Automatic Battery Charger. The front panel features a teal-colored section with LED indicators for battery charge status (5% to 100%, float, absorption, bulk) and an on/off switch. The main body is silver-grey with cooling fins on the sides. The model name 'MASS 24/50' and 'AUTOMATIC BATTERY CHARGER' are visible on the lower front, along with the Mastervolt logo and 'with battery & temperature sense'.

3.1. Control Panel Indicators

The front panel provides visual feedback on the charger's status and battery charge level:

• Charge Level LEDs: Indicators for 5%, 25%, 50%, 75%, and 100% battery charge.
• Charging Phase LEDs:
  • 대부분: Initial charging phase, delivering maximum current.
  • Abs (Absorption): Battery is nearly full, voltag전류가 감소하는 동안 e는 일정하게 유지됩니다.
  • 뜨다: Battery is fully charged, maintaining a constant voltage to compensate for self-discharge.
• 켜기/끄기 스위치: Controls the power to the charger.
• 충전기 상태 LED: Indicates if the charger is active.

4. 설정 및 설치

Proper installation is crucial for the safe and optimal performance of the Mastervolt Mass 24/50-2. It is strongly recommended that installation be carried out by a certified marine electrician or qualified professional.

4.1. 장착

• Select a dry, well-ventilated location, protected from direct sunlight, excessive heat, and moisture.
• Ensure sufficient clearance around the unit for cooling airflow, especially around the cooling fins.
• Mount the charger securely using appropriate fasteners for the mounting surface.

4.2. 전기 연결

• AC 입력: Connect the charger to a stable 240 Volt AC power source. Ensure the wiring gauge is appropriate for the current draw and circuit protection is in place.
• DC 출력 : Connect the DC output terminals to your battery bank. Observe correct polarity (+ to + and - to -). Use heavy-gauge cables suitable for the charger's output current.
• 온도 센서: Connect the optional battery temperature sensor (if supplied) to the designated port and attach it to the battery. This optimizes charging by adjusting voltag배터리 온도에 따라 다릅니다.
• 접지: Ensure the charger chassis is properly grounded according to local regulations.

5. 사용 설명서

The Mastervolt Mass 24/50-2 is designed for automatic operation once properly installed and connected.

1. 전원 켜기: Ensure all connections are secure. Flip the on/off switch on the front panel to the 'on' position. The 'charger' status LED should illuminate.
2. 충전 프로세스: The charger will automatically detect the battery's state of charge and initiate the appropriate charging phase (Bulk, Absorption, Float). Monitor the charge level and phase LEDs on the front panel.
3. 전원 끄기 : To stop charging, flip the on/off switch to the 'off' position.

The charger will automatically maintain the battery bank at optimal levels once fully charged, entering the float phase to prevent overcharging.

6. 유지관리

The Mastervolt Mass 24/50-2 is designed for minimal maintenance. Regular checks can help ensure its longevity and performance.

• 시각적 검사: Periodically inspect all cables and connections for signs of wear, corrosion, or damage. Ensure they are tight and secure.
• 통풍: Ensure that the cooling fins and ventilation openings are free from dust, dirt, or obstructions. Clean gently with a soft, dry cloth if necessary.
• 환경: Keep the charger's environment clean, dry, and within specified operating temperatures.
• 내부 유지 관리: There are no user-serviceable parts inside the charger. Do not open the casing. Refer all internal servicing to qualified Mastervolt service technicians.

7. 문제 해결

If you encounter issues with your Mastervolt Mass 24/50-2, consider the following basic troubleshooting steps:

• 충전기가 켜지지 않음:
  • Check the AC input power supply and circuit breaker.
  • Ensure the on/off switch on the front panel is in the 'on' position.
• 충전 출력 없음:
  • Verify that the DC output cables are correctly connected to the battery bank and polarity is correct.
  • Check for any blown fuses in the DC output circuit (if applicable).
  • 배터리 용량 확인tage는 충전기의 작동 범위 내에 있습니다.
• 과열:
  • Ensure adequate ventilation around the charger. Clear any obstructions from the cooling fins.
  • 주변 온도가 지정된 한도 내에 있는지 확인하세요.

For persistent issues or complex problems, contact Mastervolt customer support or a qualified service technician.

8. 사양