소개
This manual provides detailed instructions for the installation, operation, and maintenance of your Progress Lighting P6071-31 outdoor wall lantern. Please read this manual thoroughly before beginning installation or use to ensure proper function and safety.
For your safety, always follow local electrical codes and consult a qualified electrician if you are unsure about any part of the installation process.
안전 정보
경고: Always turn off power at the main circuit breaker before installing, cleaning, or servicing this fixture. Failure to do so may result in serious injury or death.
주의: 본 제품은 해당 설치 규정에 따라 제품의 구조, 작동 및 관련 위험을 잘 아는 사람이 설치해야 합니다.
중요한: Inspect wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire's insulation, do not attempt installation. Contact customer service.
This fixture is designed for outdoor use and is suitable for wet locations. Ensure all connections are properly sealed to prevent water intrusion.
패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- Light Fixture Assembly
- Mounting Hardware Kit (screws, wire nuts, mounting strap)
- 설치 지침
그림 1: 폭발 view of the P6071-31 outdoor wall lantern components.
명세서
| 기인하다 | 값 |
|---|---|
| 상표 | 진행 조명 |
| 모델 | P6071-31 |
| 색상 | 검은색 |
| 재료 | 알류미늄 |
| 스타일 | 전통적인 |
| 전등 형태 | 벽 |
| 크기(대략) | Height: 9-1/8", Width: 5-1/2", Depth from wall: 6-1/2" |
| 전구 유형 | Incandescent, 100W Medium Base (Max) |
| 권tage | 120V |
| 위치 평가 | cCSAus Wet location listed |
Figure 2: Product dimensions for the P6071-31 fixture.
설정 및 설치
Before you begin, ensure the power is turned off at the circuit breaker. This fixture is designed for wall mounting over a standard 4" hexagonal recessed outlet box.
Prepare the Mounting Strap: Attach the mounting strap to the outlet box using the provided mounting screws. Ensure the strap is securely fastened.
전기 연결을 만드십시오:
- Connect the bare copper or green ground wire from the fixture to the green ground screw on the mounting strap.
- Connect the white wire from the fixture to the white (neutral) supply wire using a wire nut.
- Connect the black wire from the fixture to the black (hot) supply wire using a wire nut.
- 모든 전선을 콘센트 상자에 조심스럽게 집어넣습니다.
고정장치 장착: Align the fixture with the mounting strap and secure it with the provided mounting screws. Ensure the fixture is flush against the wall and sealed to prevent water entry, especially in wet locations.
전구를 설치하십시오: Screw in a medium base incandescent bulb (max 100W) into the socket. Do not overtighten.
복원력 : 주회로 차단기의 전원을 다시 켜세요.
Figure 3: Installation diagram for the P6071-31 outdoor wall lantern.
작동 지침
Once installed and power is restored, the fixture can be operated via the wall switch connected to the circuit. This fixture does not include a built-in switch or sensor.
- Ensure the light bulb is securely screwed into the socket.
- 일반 벽 스위치를 사용하여 조명 기구를 켜거나 끌 수 있습니다.
- For optimal performance and longevity, use bulbs within the specified wattag전자 범위.
유지
정기적인 유지관리는 야외 벽등의 외관과 기능을 보존하는 데 도움이 됩니다.
청소: To clean the fixture, turn off the power at the circuit breaker. Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents as they may damage the finish or glass. For glass panels, a mild glass cleaner can be used.
전구 교체: Turn off the power at the circuit breaker and allow the bulb to cool before replacing. Unscrew the old bulb and screw in a new medium base incandescent bulb (max 100W). Do not exceed the maximum wattage.
점검: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Ensure the seal around the mounting surface remains intact to prevent water intrusion.
Figure 4: The P6071-31 fixture, showing details of the finish and glass for cleaning reference.
문제 해결
조명기구 사용 중 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 조명이 켜지지 않습니다. |
|
|
| 빛이 깜박입니다. |
|
|
| 고정장치가 윙윙거린다. |
|
|
보증 및 지원
이 제품은 1년 한정 보증 from the date of purchase. This warranty guarantees your complete satisfaction and includes professional after-sales customer service support.
For warranty claims, technical assistance, or any questions regarding your Progress Lighting P6071-31 fixture, please contact Progress Lighting customer service. Please have your model number (P6071-31) and proof of purchase ready when contacting support.
You can find more information and contact details on the official Progress Lighting web대지: www.progresslighting.com
