1. 서론
The SilverStone SX500-LG is a high-performance 500W power supply unit (PSU) designed for small form factor (SFF) systems. Featuring the SFX-L form factor, 80 PLUS Gold efficiency, and a fully modular cable design, it provides stable and reliable power delivery. Its lengthened design accommodates a larger 120mm fan for quieter operation compared to standard SFX PSUs. This manual provides essential information for the proper installation, operation, and maintenance of your SX500-LG power supply.
Image 1.1: The SilverStone SX500-LG power supply shown with its retail packaging.
2. 안전 정보
Please read and follow these safety guidelines carefully to prevent injury or damage to your equipment.
- PSU c를 열지 마십시오.asing. 높은 볼륨tages are present inside, even when the unit is unplugged. Opening the casing will void the warranty and poses a severe electrical shock hazard.
- Ensure the power supply is disconnected from the AC outlet before installation, removal, or cleaning.
- Install the PSU in a well-ventilated area. Do not block any ventilation openings.
- This product is designed for computer use only. Do not use it for any other purpose.
- 제품을 물, 습기 및 극한 온도로부터 멀리하십시오.
- 본 전원 공급 장치에 제공된 모듈형 케이블만 사용하십시오. 호환되지 않는 케이블을 사용하면 손상될 수 있습니다.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- SilverStone SX500-LG Power Supply Unit
- Modular Cable Set (including 24-pin ATX, 4+4-pin EPS, 6+2-pin PCIe, SATA, and Peripheral connectors)
- ATX Adapter Bracket
- 장착 나사
- AC 전원 코드
- 사용자 설명서
Image 3.1: The retail box for the SilverStone SX500-LG, indicating the product and its features.
4. 특징
The SilverStone SX500-LG power supply offers several key features for optimal performance and compatibility:
- 저소음 120mm 팬: Equipped with an intelligent semi-fanless operation mode for reduced noise.
- SFX-L Form Factor Support: Designed for compact systems, with an included ATX adapter bracket for compatibility with larger cases.
- 고효율성: 80 PLUS Gold certification, achieving 87% to 90% efficiency at 20% to 100% loading.
- 100% 모듈형 케이블: Allows for clean cable management and improved airflow within the PC case.
- Flexible Flat Cables: All cables are designed with flexible flat arrays for easier routing and installation.
- +12V Single Rail Design: Provides stable and powerful output for high-end components.
- Active PFC: Active Power Factor Correction for improved power efficiency and reduced harmonic distortion.
이미지 4.1: 앞면 view of the SilverStone SX500-LG power supply, highlighting the 120mm fan and modular connectors.
5. 설정 및 설치
Follow these steps to properly install your SilverStone SX500-LG power supply.
5.1. 준비
- 전원 공급 장치와 모든 부속품을 꺼내세요.
- 컴퓨터 시스템의 전원이 완전히 꺼져 있고 벽면 콘센트에서 플러그가 뽑혀 있는지 확인하십시오.
- If replacing an existing PSU, carefully remove it from your system.
5.2. PSU 장착
The SX500-LG is an SFX-L form factor PSU. It can be installed directly into SFX-L compatible cases or into ATX cases using the included ATX adapter bracket.
- For SFX-L Cases: Align the PSU with the mounting holes in your case and secure it with the provided screws.
- ATX 케이스의 경우: Attach the ATX adapter bracket to the SX500-LG, then mount the assembly into your ATX case's PSU bay using the appropriate screws.
이미지 5.1: 상단 view of the SilverStone SX500-LG, showing the fan and mounting screw locations.
5.3. 모듈형 케이블 연결
Connect only the necessary cables to your components. The fully modular design allows for better cable management.
- 24핀 ATX 케이블을 마더보드에 연결합니다.
- Connect the 4+4-pin EPS (CPU) cable to your motherboard's CPU power connector.
- For graphics cards, connect the 6+2-pin PCIe cables as required.
- Connect SATA power cables to your SSDs/HDDs and optical drives.
- Connect Peripheral (Molex) cables for any other components requiring them.
- 모든 연결이 안전하고 올바르게 장착되었는지 확인하십시오.
Image 5.2: The modular cable connection panel on the SilverStone SX500-LG, showing various ports for different cable types.
5.4. 전원 연결
- Ensure the power switch on the back of the PSU is in the 'OFF' (0) position.
- Connect the AC power cord to the PSU's inlet and then to a wall outlet.
이미지 5.3: 후면 view of the SilverStone SX500-LG, featuring the AC power inlet and the main power switch.
6. 사용 설명서
6.1. 전원 켜기 / 끄기
- After all connections are made, flip the power switch on the back of the PSU to the 'ON' (I) position.
- 컴퓨터의 전원 버튼을 눌러 시스템을 시작하세요.
- To power off, shut down your operating system normally, then flip the PSU power switch to 'OFF' (0) if desired for complete power disconnection.
6.2. Semi-Fanless Operation
The SX500-LG features an intelligent semi-fanless operation. The 120mm fan will remain off under low load conditions to provide silent operation. As the system load and internal temperature increase, the fan will automatically spin up to dissipate heat. This design optimizes for quietness while ensuring adequate cooling when needed.
Image 6.1: Graphs illustrating the fan speed curve relative to PSU loading and the voltage regulation stability of the power supply.
7. 유지관리
적절한 유지관리는 전원 공급 장치의 수명과 최적의 성능을 보장합니다.
- 통풍구를 깨끗하게 유지하세요: Ensure that the intake and exhaust vents of the PSU are not obstructed to allow for proper airflow.
- 먼지 청소: Periodically clean dust from the PSU's fan and vents using compressed air. Do this with the system powered off and unplugged.
- 분해하지 마십시오: Never attempt to open the power supply unit. There are no user-serviceable parts inside, and doing so can be dangerous and will void your warranty.
8. 문제 해결
If you encounter issues with your SX500-LG, refer to the following common troubleshooting steps:
- 전원 없음:
- 전원 코드가 전원 공급 장치와 벽면 콘센트에 제대로 연결되어 있는지 확인하십시오.
- 파워서플라이 뒷면의 전원 스위치가 '켜짐'(I) 위치에 있는지 확인하십시오.
- 모든 모듈형 케이블이 파워서플라이와 구성 요소에 올바르고 단단하게 연결되어 있는지 확인하십시오.
- 다른 장치로 벽면 콘센트를 테스트하여 전원이 들어오는지 확인하세요.
- 시스템 불안정/충돌:
- 시스템의 전원 요구 사항이 PSU의 500W 용량을 초과하지 않는지 확인하세요.
- 과열을 방지하려면 PC 케이스 내부의 환기가 적절한지 확인하세요.
- Verify all components are correctly installed and seated.
- 특이한 소음:
- The SX500-LG operates in a semi-fanless mode; the fan may not spin at low loads. This is normal.
- If the fan is spinning and making excessive noise, ensure no cables or obstructions are interfering with the fan blades.
- If a persistent, abnormal noise (e.g., grinding, high-pitched whine) occurs, contact SilverStone support.
If problems persist after following these steps, contact SilverStone customer support for further assistance.
9. 사양
Detailed technical specifications for the SilverStone SX500-LG power supply:
| 특징 | 사양 |
|---|---|
| 모델 번호 | SST-SX500-LG |
| 상표 | 실버스톤 |
| 폼 팩터 | SFX-L |
| 출력 와트tage | 500 와트 |
| 효율성 인증 | 80 PLUS 골드 |
| 냉각 방식 | 에어(120mm 팬, 반팬리스) |
| 모듈식 | 전체 모듈식 |
| 교류 입력 | 100-240V / 7A / 50-60Hz |
| 직류 출력(+3.3V) | 20A |
| 직류 출력(+5V) | 20A |
| 직류 출력(+12V) | 40A |
| 직류 출력(-12V) | 0.3A |
| 직류 출력(+5Vsb) | 3A |
| Max. Power (+3.3V & +5V) | 105와트 |
| Max. Power (+12V) | 480와트 |
| Max. Power (-12V) | 3.6와트 |
| Max. Power (+5Vsb) | 15와트 |
| 제품 크기(LxWxH) | 5.12 x 4.92 x 2.5인치(130 x 125 x 63.5mm) |
| 품목 무게 | 3.09파운드(1400그램) |
| 첫 번째 이용 가능 날짜 | 16년 2015월 XNUMX일 |
Image 9.1: The specification label on the SilverStone SX500-LG power supply, detailing electrical ratings and certifications.
10. 보증 및 지원
SilverStone Technology provides a limited warranty for its products. For specific warranty terms, duration, and conditions applicable to your region, please refer to the warranty card included with your product or visit the official SilverStone Technology web대지.
For technical support, troubleshooting assistance beyond this manual, or inquiries regarding replacement parts, please visit the SilverStone Technology support page or contact their customer service department. Contact information can typically be found on the official SilverStone web대지: www.silverstonetek.com
