1. 서론
This manual provides essential information for the safe and efficient operation of your COTEC SP2000-224 Pure Sine Wave Inverter. This advanced inverter offers high efficiency and power density, featuring selectable output voltage and frequency, all housed within a robust aluminum casing. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the device.
2. 안전 정보
Always observe the following safety precautions to prevent injury and damage to the inverter or connected equipment:
- 통풍: 인버터 주변에 충분한 환기가 이루어지도록 하세요. 환기구를 막지 마세요.
- 환경: Install the inverter in a dry, cool, and well-ventilated area, away from direct sunlight, heat sources, and flammable materials.
- 접지: Properly ground the inverter chassis to prevent electrical shock.
- DC 입력 : Connect the inverter only to a 24V DC battery bank. Ensure correct polarity (positive to positive, negative to negative). Reverse polarity will damage the unit.
- AC 출력: Do not overload the inverter. Ensure the total wattage of connected AC devices does not exceed the inverter's rated output.
- 서비스: 인버터를 직접 열거나 수리하려고 하지 마십시오. 모든 수리는 자격을 갖춘 전문가에게 맡기십시오.
- 물 노출: Keep the inverter away from water, rain, or excessive moisture.
3. 제품 특징
The COTEC SP2000-224 Inverter incorporates several advanced features for reliable power conversion:
- 민감한 전자 장치를 위한 순수 정현파 출력.
- Power ON / OFF remote control capability via a dedicated green terminal.
- Full input and output isolation for enhanced safety.
- Temperature and load-controlled cooling fan for efficient heat dissipation.
- 3색 LED 상태 표시등을 갖춘 사용자 친화적인 인터페이스.
- Output frequency selectable between 50 Hz and 60 Hz via DIP switch.
- 출력 볼륨tagDIP 스위치를 통해 선택 가능합니다.
- Power saving mode adjustable via a variable resistor.
- Comprehensive input protection: Reverse Polarity (via fuse), Under Voltage, 권 이상tage.
- Comprehensive output protection: Short Circuit, Overload, Over Temperature.
- Certifications: E13, UL, CE, FCC approved.
4. 설정 및 설치
Proper installation is crucial for the inverter's performance and safety.
4.1 물리적 설치
Mount the inverter securely in a location that meets the safety requirements mentioned in Section 2. Ensure sufficient space around the unit for airflow.
그림 4.1: 각진 view of the COTEC SP2000-224 Pure Sine Wave Inverter, showcasing its robust blue and gray casing.
4.2 DC 입력 연결
Connect the inverter to a 24V DC battery bank using appropriate gauge cables. Ensure the positive (+) terminal of the inverter connects to the positive terminal of the battery, and the negative (-) terminal of the inverter connects to the negative terminal of the battery. Install an appropriate fuse or circuit breaker in the positive DC line close to the battery.
그림 4.2: 뒤쪽 view of the inverter, highlighting the DC input terminals (red for positive, black for negative), the chassis ground screw, and the remote control terminal.
4.3 Chassis Ground Connection
Connect the chassis ground terminal (labeled 'CHASSIS GROUND') to a reliable earth ground point. This is a critical safety step.
4.4 AC Output and Controls
The inverter features a standard AC outlet and control switches on its front panel.
그림 4.3: 앞쪽 view of the inverter, displaying the AC output socket, the main power switch, LED indicators, and DIP switches for configuration.
4.5 DIP 스위치 설정
The inverter features DIP switches for configuring output frequency and voltage. Refer to the specifications table (Section 7) or the product label for specific settings. Ensure the inverter is powered off before adjusting DIP switches.
- 출력 주파수: Select 50 Hz or 60 Hz based on your regional requirements.
- 출력 볼륨tage: 원하는 AC 출력 볼륨을 선택하세요tage (e.g., 230VAC for this model).
5. 사용 설명서
5.1 전원 켜기/끄기
After all connections are secure and verified, switch the main power button on the inverter to the 'ON' position. The LED indicators will illuminate to show the inverter's status. To power off, switch the button to 'OFF'. A remote control terminal is also available for external ON/OFF control.
5.2 LED 표시등
The 3-color LED indicators provide visual feedback on the inverter's operational status and any potential faults. Consult the product documentation or the specifications table for a detailed explanation of each LED state.
5.3 절전 모드
The power saving mode can be adjusted via a variable resistor. This feature helps reduce quiescent current draw when no load or a very light load is connected, conserving battery power.
5.4 교류 부하 연결
Plug your AC appliances into the inverter's AC output socket. Ensure the total power consumption does not exceed the inverter's continuous power rating (2000W for this model). For inductive loads (e.g., motors, refrigerators), consider their surge power requirements, which can be significantly higher than their running power.
6. 유지관리
Regular maintenance ensures optimal performance and extends the lifespan of your inverter.
- 청소: 인버터를 깨끗하게 유지하고 먼지가 쌓이지 않도록 하십시오. 외부를 닦을 때는 마른 천을 사용하십시오. 액체 세척제는 사용하지 마십시오.
- 통풍: Periodically check that the cooling fan and ventilation openings are clear of obstructions.
- 사이: Inspect all DC and AC connections regularly to ensure they are tight and free from corrosion. Loose connections can cause overheating and poor performance.
- 배터리 유지 관리: Follow the manufacturer's recommendations for your battery bank's maintenance.
7. 문제 해결
인버터가 제대로 작동하지 않을 경우, 다음의 일반적인 문제 및 해결 방법을 참조하십시오.
- 출력 전력 없음:
- Check DC input connections and battery voltage.
- Verify the inverter's power switch is ON.
- Check for blown DC input fuses (if applicable).
- 과부하 표시:
- 인버터에 연결된 총 부하를 줄이세요.
- Disconnect and reconnect the load to reset the inverter.
- Over Temperature Indication:
- 인버터 주변에 적절한 환기가 이루어지도록 하십시오.
- 냉각 팬이 작동하는지 확인하십시오.
- Reduce the load if operating in a hot environment.
- 배터리 부족tag경보/종료:
- Recharge the battery bank.
- 배터리 연결부가 헐거워졌거나 부식되었는지 확인하십시오.
For persistent issues, contact COTEC customer support.
8. 사양
The following table details the technical specifications for the COTEC SP2000 series, with specific values for the SP2000-224 model highlighted where applicable.
그림 8.1: Detailed technical specifications for the COTEC SP-2000 series, including the SP2000-224 model.
| 특징 | 사양 |
|---|---|
| 상표 | 코텍 |
| 모델명 | SP2000 (SP2000-224 variant) |
| 정격 전력 | 2000와트 |
| Surge Power (1 Sec) | 4000와트 |
| DC 입력 볼륨tage | 24VDC (Operating Range: 21.0-33.0VDC) |
| AC 출력 볼륨tage | 230VAC (selectable) |
| 출력 주파수 | 50/60Hz(선택 가능) |
| 출력파형 | Pure Sine Wave (THD<3% at nominal load) |
| 효율성(최대) | 93% |
| 냉각 | Temperature & load controlled fan |
| 작동 온도 | -20°C ~ +40°C |
| 보관 온도 | -30°C ~ +70°C |
| 치수(폭 x 높이 x 깊이) | 17.44 x 9.76 x 3.27인치(443 x 248 x 83mm) |
| 품목 무게 | 1 pounds (approximate, actual unit weight may vary) |
| 패키지 크기 | 19 x 12 x 6 인치 |
| 인증 | E13, UL, CE, FCC approved |
8.1 기계 도면
For detailed physical dimensions and mounting information, refer to the mechanical drawings below.
그림 8.2: Mechanical drawings providing precise dimensions for installation planning.
9. 보증 및 지원
COTEC products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official COTEC web사이트. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.
