소개
This manual provides essential information for the safe and efficient operation of your Beckett 1250 GPH Submersible Water Pump. Please read these instructions carefully before installation and use. Retain this manual for future reference.
The Beckett 1250 GPH Submersible Water Pump is designed for circulating water in fountains, ponds, and waterfalls. This magnetic drive pump features a low water shut-off sensor for protection and is suitable for continuous, submerged operation. It is oil-free, making it safe for aquatic life.
중요한 안전 정보
WARNING: To avoid possible electric shock, special care should be taken since water is used in the use of pond equipment. For each of the following situations, do not attempt repairs yourself. Return the appliance to an authorized service facility for service or discard the appliance.
- Ensure the pump is always fully submerged in water during operation. Running dry will damage the pump and void the warranty.
- 전원 코드나 플러그가 손상된 경우 펌프를 작동하지 마십시오.
- Do not remove the grounding prong from the power plug.
- 유지관리나 청소를 하기 전에는 반드시 펌프의 전원을 분리하세요.
- Do not lift the pump by its power cord. Use the molded handle provided.
- This pump is designed for fresh water use only.
- Ensure the electrical outlet is a grounded, GFCI-protected receptacle.
- 펌프와 분수 작동 중에는 어린이와 애완동물이 가까이 가지 않도록 하십시오.
This pump is UL Listed for electrical safety.
패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- Beckett 1250 GPH Submersible Water Pump with 15 ft. power cord
- 1-inch ID tubing adapter
Image: The Beckett 1250 GPH Submersible Water Pump, showing the pump unit, coiled 15-foot power cord, and the included 1-inch ID tubing adapter.
이미지: 폭발 view of the pump components, including the outer casing, pump body, power cord, and tubing adapter.
설정 및 설치
- 위치를 선택하십시오 : Place the pump in the deepest part of your pond or water feature, ensuring it is fully submerged. The pump is designed for continuous submerged operation.
- 튜브 부착: Connect appropriate 1-inch ID (Inner Diameter) tubing to the pump's outlet using the provided adapter. Secure the tubing with a hose clamp (누출 방지를 위해 포함되지 않음).
- 위치: Use the molded handle to carefully lower the pump into the water. Ensure the pump is stable and not resting on loose debris.
- 전기 연결: Route the 15-foot power cord to a grounded, GFCI-protected electrical outlet. Ensure the cord is not kinked or pinched. Do not plug in the pump until it is fully submerged.
- 수중 펌프: Ensure the water level is sufficient to completely cover the pump. The pump features a low water shut-off sensor that will prevent operation if the water level is too low.
- 전원 켜기: Once the pump is fully submerged and all connections are secure, plug the pump into the GFCI-protected outlet.
Image: Diagram illustrating the pump's suitability for small waterfalls, indicating 1250 GPH flow, 115V, 60Hz, 50 watts power requirements, and a 15 ft cord length.
Image: Performance chart showing the relationship between pump height and flow rate, with the 1250 GPH pump (FC1200) reaching a maximum lift of 14.8 ft.
작업
The Beckett 1250 GPH Submersible Water Pump is designed for continuous operation once properly installed and submerged.
- 초기 시작: After plugging in, the pump should begin circulating water immediately. If it does not, ensure it is fully submerged and the power supply is active.
- 저수위 차단: This pump is equipped with a low water shut-off sensor. If the water level drops below the safe operating threshold, the pump will automatically turn off to prevent damage. It will restart automatically once the proper water level is restored.
- 연속 작업: For optimal performance and longevity, ensure the pump remains fully submerged and free from debris.
유지
정기적인 유지관리를 통해 최적의 성능을 보장하고 펌프의 수명을 연장할 수 있습니다.
- 전원 분리: 유지보수를 하기 전에 항상 펌프의 전원 플러그를 콘센트에서 뽑으십시오.
- Clean Inlet Screen: Periodically inspect and clean the pump's inlet screen to remove any accumulated debris such as leaves, algae, or sediment. A clogged screen can reduce flow and strain the motor.
- 임펠러를 점검하십시오: If flow is reduced after cleaning the screen, the impeller may be obstructed. Carefully remove the pump casing and clean the impeller and its housing.
- 겨울철 : In freezing climates, remove the pump from the water feature before the first freeze. Clean the pump thoroughly and store it in a frost-free location, submerged in a bucket of water if possible, to keep seals moist.
이미지: 밑면 view of the Beckett 1250 GPH pump, highlighting the large inlet screen designed to protect against debris.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 펌프가 작동하지 않거나 예기치 않게 멈춥니다. |
|
|
| 물 흐름 감소. |
|
|
| 펌프에 소음이 있습니다. |
|
|
명세서
| 상표 | 베켓 |
| 모델 번호 | 7218510 |
| 최대 유량 | 1250GPH(분당 20.83갤런) |
| 최대 리프팅 높이 | 14.8 피트 |
| 왓tage | 50 와트 |
| 권tage | 115 볼트 |
| 빈도 | 60Hz |
| 전원 | 코드식 전기 |
| 코드 길이 | 15 피트 |
| 제품 크기(L x W x H) | 6.4인치 x 3.8인치 x 5.3인치 |
| 품목 무게 | 4.3 파운드 |
| 재료 | Copper 20%, Epoxy 18%, Plastic 47%, Steel 15% |
| 튜빙 호환성 | 1인치 아이디 |
| 안전인증 | UL 인증 |
Image: Comparison chart detailing specifications for various Beckett pump models, including the 1250 GPH (FC1200/FC1250) model.
보증 정보
Beckett Corporation products are manufactured to high-quality standards. For specific warranty details, including duration and coverage, please refer to the documentation included with your purchase or visit the official Beckett Corporation web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
고객 지원
If you have any questions, require technical assistance, or need to report an issue with your Beckett 1250 GPH Submersible Water Pump, please contact Beckett Corporation customer service.
For the most current contact information, please visit the official Beckett Corporation web해당 웹사이트를 참조하거나 포장재를 확인하세요.
고객 지원팀에 문의하실 때는 모델 번호(7218510)와 구매일자를 준비해 주시기 바랍니다.
