Fortin EVO-KEY

Fortin EVO-Key 범용 이모빌라이저 바이패스 모듈 사용 설명서

1. 서론

The Fortin EVO-Key is a universal immobilizer bypass module designed for automotive applications. It facilitates the integration of remote start or security systems by temporarily bypassing the vehicle's factory immobilizer system, allowing the engine to start without the physical presence of a transponder key. This manual provides essential information for the proper installation, operation, and maintenance of your EVO-Key module.

2. 제품 오버view

The EVO-Key module is a compact electronic device engineered to integrate seamlessly with various vehicle immobilizer systems. It comes preloaded, simplifying the initial setup process for compatible vehicles. Its primary function is to provide a secure and reliable method for remote starting vehicles equipped with transponder-based immobilizers.

Fortin EVO-Key Universal Immobilizer Bypass Module, top view

그림 2.1: 맨 위 view of the Fortin EVO-Key module, showing the Fortin logo and textured surface.

Fortin EVO-Key Universal Immobilizer Bypass Module, rear view 커넥터

그림 2.2: 뒤쪽 view of the Fortin EVO-Key module, displaying the various wiring harness connectors for vehicle integration.

Fortin EVO-Key Universal Immobilizer Bypass Module, angled view 커넥터

그림 2.3: 각진 view of the Fortin EVO-Key module, highlighting the side profile and connector ports.

3. 설정 및 설치

Installation of the Fortin EVO-Key module requires technical knowledge of automotive electrical systems and vehicle immobilizer protocols. It is strongly recommended that installation be performed by a certified professional installer.

3.1. 차량 호환성

Before installation, verify the compatibility of the EVO-Key module with your specific vehicle make, model, and year. Refer to the official Fortin website for the most up-to-date compatibility list and detailed vehicle-specific wiring diagrams and programming instructions.

3.2. 일반 설치 단계 (전문가 설치를 권장합니다)

  1. 준비: Disconnect the vehicle's battery before beginning any wiring.
  2. 배선: Connect the EVO-Key module to the vehicle's electrical system and the remote start/security system according to the vehicle-specific wiring diagram provided by Fortin. Ensure all connections are secure and properly insulated.
  3. 프로그램 작성: Although the module is preloaded, vehicle-specific programming may still be required to synchronize it with your vehicle's immobilizer system. Follow the detailed programming instructions available on the Fortin website for your specific vehicle.
  4. 테스트: After installation and programming, reconnect the battery and thoroughly test the remote start and immobilizer bypass functions to ensure correct operation.

4. 사용 설명서

Once properly installed and programmed, the Fortin EVO-Key module operates automatically in conjunction with your remote start or security system. It requires no direct user interaction for its primary function.

  • When a remote start command is initiated by your remote start system, the EVO-Key module will temporarily bypass the vehicle's immobilizer.
  • This allows the engine to start without the need for a physical key in the ignition.
  • Upon engine shutdown or disarming of the remote start system, the immobilizer function is restored to its normal state.

5. 유지관리

The Fortin EVO-Key module is designed for long-term reliability and requires no routine user maintenance. To ensure optimal performance:

  • 모든 배선 연결이 안전하게 유지되고 부식되지 않았는지 확인하세요.
  • Keep the module free from excessive moisture, dust, and extreme temperatures.
  • 모듈이나 배선에 물리적인 손상을 가하지 마십시오.

6. 문제 해결

If you experience issues with your Fortin EVO-Key module or the associated remote start/security system, consider the following troubleshooting steps:

  • Vehicle Fails to Remote Start:
    • 모든 배선 연결이 올바르고 안전한지 확인하세요.
    • Confirm the module was programmed correctly for your specific vehicle.
    • Check the remote start system for any error codes or malfunctions.
  • Immobilizer Warning Light:
    • If the immobilizer warning light illuminates during remote start, it may indicate an issue with the bypass module's operation or programming.
    • Re-verify programming steps or consult Fortin's technical support resources.
  • 일반적인 오작동:
    • Ensure the vehicle's battery is fully charged and in good condition.
    • Consult the Fortin website for specific troubleshooting guides and firmware updates.

For complex issues, it is recommended to contact a professional automotive electronics technician or Fortin technical support.

7. 사양

특징세부 사항
모델에보키
상표포틴
품목 무게3.2 온스
제품 치수4.8 x 3 x 1.5 인치
제조업체포틴
호환 장치All Vehicles (check specific compatibility)
원격 제어가 포함되어 있습니까?아니요
한국어:770350002909

8. 보증 및 지원

For detailed warranty information, technical support, and additional resources, please refer to the official Fortin web사이트. 보증 약관은 지역 및 소매업체에 따라 다를 수 있습니다.

  • 공식적인 Web대지: www.fortin.ca
  • 기술 지원: Consult the support section on the Fortin web연락처 정보와 FAQ는 해당 사이트에서 확인하세요.

관련 문서 - 에보키

사전view Fortin EVO-ALL 설치 가이드: 포드 F-시리즈 트럭(2011-2016)용 원격 시동 인터페이스
이 가이드는 표준 키가 장착된 포드 F-시리즈 트럭(2011-2016년식)과 호환되는 Fortin EVO-ALL 범용 데이터 바이패스 및 인터페이스 모듈의 자세한 설치 지침, 배선도 및 키 바이패스 프로그래밍 절차를 제공합니다. 원격 시동 및 보안 기능을 통합하는 방법을 알아보세요.
사전view 기아 니로(2017-2021) 하이브리드 푸시 투 스타트용 Fortin EVO-KEY 설치 가이드
기아 니로(2017-2021) 하이브리드 푸시투스타트 차량에 Fortin EVO-KEY 인터페이스 모듈을 설치하는 방법에 대한 종합적인 설치 및 프로그래밍 가이드입니다. 배선도와 단계별 지침이 포함되어 있습니다.
사전view Fortin EVO-KEY 설치 가이드 (현대 베뉴 (2023) 푸시 스타트용)
2023년형 현대 베뉴(푸시 투 스타트 시스템 장착)에 포틴 EVO-KEY 이모빌라이저 바이패스 모듈을 설치하는 단계별 지침입니다. 배선도 및 프로그래밍 절차가 포함되어 있습니다.
사전view 2025년형 토요타 캠리 하이브리드용 포틴 EVO-ONE 원격 시동 장치 설치 가이드
Detailed installation and programming guide for the Fortin EVO-ONE remote starter system (THAR-ONE-TOY16 harness) for the 2025 Toyota Camry Hybrid with Push-to-Start. Covers wiring, Dcryptor programming, key bypass, remote starter functionality, and safety warnings.
사전view Fortin EVO-RIDE 데이터 키 바이패스 모듈 설치 가이드
Fortin EVO-RIDE 데이터 키 바이패스 모듈 공식 설치 가이드입니다. 원격 차량 시동 통합을 위한 설정, 배선 및 프로그래밍 방법을 자세히 설명합니다. 차량 호환성 정보도 포함되어 있습니다.
사전view Fortin EVO-KEY Installation and Programming Guide for Kia Niro (2017-2021)
Detailed installation and programming guide for the Fortin EVO-KEY interface module for Kia Niro Hybrid Push-to-start vehicles (2017-2021). Includes wiring diagrams, connection points, and step-by-step programming procedures.