베링거 XD8USB 전자 드럼 세트 사용 설명서

1. 서론

This manual provides essential information for the proper setup, operation, and maintenance of your Behringer XD8USB Electronic Drum Set. Please read these instructions thoroughly before using the product to ensure safe and optimal performance. Retain this manual for future reference.

2. 안전 지침

• 전원 공급 장치: 지정된 전원 어댑터만 사용하세요. 볼륨을 확인하세요.tage는 귀하의 지역 전원 공급 장치와 일치합니다.
• 물과 습기: 본 제품을 비, 습기 또는 과도한 습도에 노출시키지 마십시오. 또한, 제품 위에 액체가 담긴 물체를 올려놓지 마십시오.
• 통풍: 충분한 환기를 유지하세요. 환기구를 막지 마세요.
• 열원: 장치를 라디에이터, 난방 조절기, 스토브 또는 열을 발생시키는 기타 장치와 같은 열원으로부터 멀리 두십시오.
• 청소: 마른 천으로만 닦으십시오. 액체 세제나 스프레이형 세척제를 사용하지 마십시오.
• 서비스: 이 제품을 직접 수리하려고 하지 마십시오. 모든 서비스는 자격을 갖춘 서비스 담당자에게 문의하십시오.
• 케이블 : 전원 코드가 밟히거나 끼이지 않도록, 특히 플러그, 콘센트, 그리고 기기에서 코드가 나오는 부분에서 더욱 주의하십시오.

3. 패키지 내용

Upon unpacking your Behringer XD8USB Electronic Drum Set, please verify that all components listed below are present and in good condition:

• HDS110USB Sound Module
• Drum Rack Hardware
• 4x 8-inch Drum Pads (Snare, Tom 1, Tom 2, Tom 3)
• 1x Percussion Pad with Stand and Pedal (Kick Drum)
• 3x 12-inch Cymbal Pads (Hi-Hat, Crash, Ride)
• 1x Hi-Hat Control Pedal
• 나지만
• Multipin Cabling and Connectors
• 전원 어댑터

4. 설치 및 조립

Careful assembly is crucial for stability and optimal playability. Follow these general steps:

1. 드럼 랙 조립: Begin by assembling the main frame of the drum rack. Ensure all connections are secure and tightened to provide a stable foundation.
2. 드럼 패드 부착: Mount the 8-inch drum pads (snare, tom 1, tom 2, tom 3) to the rack. Position them ergonomically for comfortable playing.
3. Attach Cymbal Pads: Mount the 12-inch cymbal pads (hi-hat, crash, ride) to their respective arms on the rack.
4. Position Kick Drum and Pedals: Place the percussion pad (kick drum) and its pedal in front of the rack. Position the hi-hat control pedal next to it.
5. Adjusting Components: Once all components are loosely attached, adjust their angles and heights to your preference. Then, securely tighten all clamps와 볼트.

Image 1: Fully assembled Behringer XD8USB Electronic Drum Set. This image displays the complete 8-piece electronic drum set, including the drum pads, cymbal pads, kick drum pad, hi-hat pedal, and the HDS110USB sound module mounted on the rack.

5. 구성 요소 연결하기

The XD8USB uses multipin cabling for simplified connection. Each cable is typically labeled to correspond with its respective pad or pedal.

1. Connect Pads to Module: Connect the multipin cable from each drum and cymbal pad to the corresponding input on the HDS110USB sound module. Ensure connections are firm.
2. 페달을 연결하십시오: Connect the kick drum pedal and hi-hat control pedal to their designated inputs on the sound module.
3. 전원 연결: Connect the power adapter to the HDS110USB module and then to a suitable power outlet.
4. 오디오 출력: Connect headphones to the headphone jack or connect the module's main output to an amplifier or mixer using appropriate audio cables (not included).
5. USB 연결: For computer connectivity, use a standard USB cable to connect the module to your computer.

6. Operating the HDS110USB Sound Module

The HDS110USB module is the central control unit for your drum set. It features various drum kits, sounds, and practice functions.

이미지 2: 클로즈업 view of the Behringer HDS110USB Sound Module. This image highlights the module's display, control buttons for kit selection, voice, pattern, volume, and individual pad triggers.

• 전원 켜기/끄기: Use the power button to turn the module on or off.
• 볼륨 조절: 전용 노브를 사용하여 전체 볼륨을 조절하십시오.
• 키트 선택: Use the 'KIT' buttons to cycle through the available preset drum kits.
• 음성 선택: The 'VOICE' function allows you to change individual instrument sounds within a selected kit.
• Pattern/Song Playback: The module includes built-in patterns or songs for practice. Use the 'PAT' buttons to select and control playback.
• 메트로놈: Activate the metronome for timing practice.
• USB 연결: When connected to a computer via USB, the module can function as a MIDI interface, allowing you to trigger sounds in software or record MIDI data.

7. 기본 동작

After setup, ensure your headphones or external audio system are connected and powered on. Turn on the HDS110USB module. Select a drum kit and begin playing. Experiment with different kits and sounds to find your preferred settings.

8. 유지관리

Regular maintenance helps prolong the life of your electronic drum set.

• 청소: 패드, 심벌즈 및 모듈은 부드럽고 마른 천으로 닦아주세요. 연마성 세척제나 용제는 사용하지 마세요.
• 케이블 관리 : Keep cables organized and untangled to prevent damage.
• 저장: When not in use for extended periods, store the drum set in a clean, dry environment, away from extreme temperatures.
• 패드 관리: While pads are durable, avoid excessive force that could damage the sensors.

9. 문제 해결

문제가 발생하면 다음의 일반적인 문제와 해결 방법을 참조하세요.

• 소리 없음:
  • Check power connection to the module.
  • Ensure headphones or external speakers are connected and their volume is up.
  • Verify the module's master volume is not at minimum.
• 패드가 작동하지 않음:
  • Check the cable connection for the specific pad to the module.
  • 패드가 단단히 고정되어 있고 헐거워지지 않았는지 확인하십시오.
• Unwanted Triggers (Crosstalk):
  • This can occur if pads are too sensitive or mounted too close. Adjust pad sensitivity settings in the module (if available) or reposition pads slightly.
  • Avoid hitting the drum rack frame, as vibrations can sometimes trigger nearby pads.
• 윙윙거리는 소리:
  • 모든 오디오 케이블이 제대로 차폐되어 연결되어 있는지 확인하십시오.
  • If connecting an external device (e.g., phone, MP3 player), try disconnecting it to see if the buzzing stops.
• Hi-Hat Pedal Response Issues:
  • Verify the hi-hat control pedal cable is securely connected.
  • Ensure the pedal mechanism is not obstructed and moves freely.

10. 사양

11. 보증 및 지원

For detailed warranty information, please refer to the documentation included with your purchase or visit the official Behringer website. If you require technical support or have questions not covered in this manual, please contact Behringer customer service or your authorized dealer.