Nice Era P1S Wireless Remote Control

제품 끝view

The Nice Era P1S is a 1-channel wireless manual transmitter designed for use with Era Mat and Era Fit tubular motors that have an integrated receiver. This remote control offers an intuitive programming method and features a comfortable, standard wall mount support.

It allows for easy adjustment of sunlight settings and includes "Sun for You" control buttons with LED indicators to manage automatic commands from existing temperature sensors. The device operates at 433.92 MHz with a rolling code system, ensuring reliable and secure communication.

An image showing the Nice Era P1S wireless remote control. The remote is white with a grey border, featuring three main oval buttons for up, stop, and down control, and two smaller circular buttons with sun icons. The 'Nice' logo is visible at the bottom.

설정 및 프로그래밍

Before first use, ensure the battery is correctly installed. The Nice Era P1S features an intuitive programming process with buttons located on the back of the transmitter, inside the battery compartment.

1. 배터리 설치: Open the battery compartment on the back of the remote control. Insert the required batteries, ensuring correct polarity.
2. 초기 프로그래밍: Access the programming buttons located within the battery compartment. Follow the specific instructions provided with your Era Mat or Era Fit motor for pairing the remote.
3. Copying Transmitters: New transmitters can be easily copied by bringing them close to an already programmed Nice Era P1S remote. Refer to your motor's manual for detailed steps on this process.
4. 벽 장착 설치: The remote comes with a comfortable wall mount. Choose a convenient location and secure the mount using appropriate fasteners.

작동 지침

The Nice Era P1S remote control provides simple operation for your motorized blinds or awnings.

• 위로 버튼(▲): Press to raise the blind or open the awning.
• 정지 버튼(■): Press to stop the movement of the blind or awning at any desired position.
• 아래쪽 버튼(▼): Press to lower the blind or close the awning.
• Sun for You Buttons (☀): These buttons, indicated by sun icons and an LED, allow you to activate or deactivate the reception of automatic commands from existing temperature or light sensors. Press the respective button to toggle the sensor control feature.
• 그룹 제어: A single radio transmitter can be registered for multiple blinds or rolling floors to form groups, allowing simultaneous control.

유지

To ensure the longevity and optimal performance of your Nice Era P1S remote control, follow these simple maintenance guidelines:

• 배터리 교체: Replace batteries promptly when the remote's performance degrades or the LED indicator signals low power. Use only the specified battery type.
• 청소: 리모컨은 부드럽고 마른 천으로 닦으십시오. 연마성 세제나 용제를 사용하지 마십시오. 표면이나 내부 부품이 손상될 수 있습니다.
• 저장: 장기간 사용하지 않을 때는 리모컨을 건조하고, 극한 온도와 직사광선을 피해 보관하십시오.

문제 해결

If you experience issues with your Nice Era P1S remote control, consider the following common solutions:

• 원격 응답 없음:
  • 배터리를 점검하십시오. 오래되었거나 방전된 배터리는 교체하십시오.
  • 리모컨이 수신기의 수신 범위 내에 있는지 확인하십시오.
  • Verify there are no obstructions between the remote and the motor.
• 모터가 명령에 반응하지 않음:
  • Re-pair the remote control with the motor according to the motor's programming instructions.
  • Check if the motor has power.
• 일관성 없는 작업:
  • Ensure the "Sun for You" sensor control is set as desired.
  • Interference from other wireless devices might be a factor. Try operating the remote from a different position.

문제가 지속되면 고객 지원에 문의하여 추가 지원을 받으십시오.

명세서

보증 및 지원

For information regarding warranty coverage, please refer to the documentation provided with your purchase or contact the manufacturer directly. Nice provides support for its products to ensure customer satisfaction.

If you require technical assistance, have questions about product functionality, or need to report an issue, please visit the official Nice web해당 웹사이트를 방문하거나 제품 포장 또는 웹사이트에 제공된 연락처 정보를 사용하여 고객 서비스 부서에 문의하십시오. web대지.