TC Electronic T2

TC Electronic T2 Reverb Effects Pedal User Manual

소개

The TC Electronic T2 Reverb effects pedal provides a diverse range of reverb effects for guitar and other instruments. This manual details the pedal's features, setup procedures, operational guidelines, maintenance tips, troubleshooting steps, and technical specifications to ensure optimal performance.

제품 끝view

The T2 Reverb pedal features intuitive controls for shaping your sound and a robust design for reliable use. Familiarize yourself with the pedal's components:

  • DECAY 노브: 리버브 잔향의 길이를 조절합니다.
  • 톤 노브: Adjusts the brightness or darkness of the reverb.
  • 믹스 노브: Balances the ratio between the dry (unaffected) signal and the wet (effected) signal.
  • Reverb Type Selector: A rotary switch to select from various reverb algorithms (I-VIII, E1, E2, TP).
  • 풋스위치: 효과를 적용하거나 우회합니다.
  • 입력/출력 잭: For connecting your instrument and amp리퍼.
  • 전원 입력: For connecting a 9V DC power supply.
TC Electronic T2 Reverb Pedal top view showing Decay, Tone, Mix knobs, Reverb Type selector, and footswitch.
그림 1: 상단 view of the TC Electronic T2 Reverb pedal, highlighting the control knobs and footswitch.
각진 view of TC Electronic T2 Reverb Pedal showing input and output jacks.
그림 2: 각도 view of the TC Electronic T2 Reverb pedal, illustrating the input and output jacks on the sides.

설정

  1. 전원 연결: Connect a 9V DC power adapter (center negative, not included) to the power input jack. Alternatively, the pedal can be powered by a 9V battery (not included) by opening the battery compartment.
  2. 계기 연결: Connect your instrument (e.g., guitar) to the input jack on the right side of the pedal using a standard 1/4-inch instrument cable.
  3. Amplifier 연결: 페달 왼쪽에 있는 출력 잭을 페달에 연결합니다. amp표준 1/4인치 악기 케이블을 사용하여 리파이어의 입력을 받습니다.
  4. Stereo Operation (Optional): For stereo output, connect the second output jack to a second amp앰프 또는 스테레오 입력 장치.

전원을 켜기 전에 모든 연결이 안전한지 확인하십시오. amp앰프와 페달.

작동 지침

기본 동작

  • 전원 켜기: Once connected, press the footswitch to engage the effect. The LED indicator will illuminate. Press again to bypass the effect.
  • Selecting Reverb Type: Rotate the Reverb Type Selector knob to choose from the available reverb algorithms (I through VIII, E1, E2). Each setting offers a distinct reverb character.
  • Adjusting Reverb Parameters:
    • 사용하세요 부식 knob to control the duration of the reverb.
    • 사용하세요 음정 knob to adjust the frequency content of the reverb, making it brighter or darker.
    • 사용하세요 혼합 knob to blend the dry signal with the reverb effect. A higher setting increases the effect's prominence.

TonePrint Feature

The "TP" setting on the Reverb Type Selector activates the TonePrint feature. TonePrint allows you to upload custom-tuned reverb sounds created by artists or design your own using the TC Electronic TonePrint app. Connect your pedal to a computer via USB (cable not included) or beam TonePrints wirelessly from your smartphone to the pedal's pickup.

유지

  • 청소: 페달 외부를 닦을 때는 부드럽고 마른 천을 사용하세요. 연마성 세제나 용제는 사용하지 마세요.
  • 배터리 교체: If using battery power, replace the 9V battery when the LED indicator dims or the effect performance degrades. To replace, open the battery compartment on the underside of the pedal.
  • 저장: Store the pedal in a dry environment, away from extreme temperatures and direct sunlight, when not in use. Disconnect power and remove the battery if storing for extended periods.

문제 해결

문제가능한 원인해결책
소리가 나지 않거나 신호가 약함Incorrect cable connections, dead battery, faulty power supply, volume knobs on instrument/amp 거절했다.Check all cable connections. Replace battery or verify power supply. Ensure instrument and amplifier volumes are set appropriately.
원치 않는 소음이나 윙윙거림Ground loop, faulty cables, interference from other electronics, improper power supply.Use shielded cables. Try a different power outlet or isolated power supply. Move pedal away from other electronic devices.
Effect not engaging (LED off)전원이 안 들어오네요, 풋스위치가 고장났어요.Verify power connection and battery status. If problem persists, contact support.
TonePrint not loadingIncorrect app usage, connection issues.Ensure the TonePrint app is updated and the pedal is correctly connected (USB or beaming). Refer to the TonePrint app's instructions for detailed guidance.

명세서

  • 모델: T2
  • 품목 무게: 1 pound (approximately 454 grams)
  • 제품 크기: 4.61 x 2.48 x 2.91인치(11.7 x 6.3 x 7.4cm)
  • 전원: 9V DC(중심 음극) 전원 어댑터 또는 9V 배터리
  • 권tage: 9 볼트
  • 신호 형식: 비슷한 물건
  • 하드웨어 인터페이스: HP-HSC

보증 및 지원

TC Electronic products are covered by a limited warranty. For detailed warranty information, product support, or service inquiries, please visit the official TC Electronic web사이트를 방문하거나 고객 지원팀에 직접 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

공식적인 Web대지: www.tcelectronic.com

관련 문서 - T2

사전view TC Electronic Hall of Fame 2 Reverb 빠른 시작 가이드
TC Electronic Hall of Fame 2 리버브 페달의 컨트롤, 기능 및 기본 작동법을 간략하게 소개하는 가이드입니다. USB 연결, TonePrint 편집, MASH 기능 및 FCC 규정 준수에 대한 정보도 포함되어 있습니다.
사전view TC Electronic Hall of Fame 2 Mini Reverb 빠른 시작 가이드
TC Electronic Hall of Fame 2 Mini Reverb 이펙트 페달에 대한 간략한 가이드로, 컨트롤, 연결 방법 및 규정 준수 정보를 다룹니다.
사전view TC Electronic Skysurfer Reverb 빠른 시작 가이드
TC Electronic Skysurfer Reverb에 대한 간략한 가이드로, 스튜디오 품질의 리버브 효과를 위한 컨트롤, 연결 및 기능에 대한 자세한 정보를 제공합니다.
사전view TC Electronic INFINITE SAMP르 쉬스테이너 빠른 시작 가이드
TC Electronic INFINITE S를 위한 간결한 빠른 시작 가이드AMPLE SUSTAINER 기타 이펙트 페달의 컨트롤, 특징 및 기본 작동법에 대한 자세한 설명입니다.
사전view TC Electronic Hall of Fame Reverb 사용자 설명서
TC Electronic Hall of Fame 리버브 페달의 안전 지침, 기능, 컨트롤, 리버브 유형, TonePrint, 바이패스 모드 및 기술 사양을 포함한 종합적인 사용자 설명서입니다.
사전view TC Electronic PLETHORA X5 빠른 시작 가이드: MASH 풋스위치를 사용한 TonePrint 페달보드
TC Electronic PLETHORA X5는 5개의 MASH 풋스위치를 탑재한 다재다능한 톤프린트 페달보드로, 빠르게 음악 작업을 시작할 수 있도록 도와줍니다. 컨트롤, 기능, 사양 및 톤프린트 전송 방법에 대해 자세히 알아보세요.