소개
The TC Electronic Alter Ego V2 Vintage Delay and Looper Pedal is designed to provide a wide array of classic echo and delay effects, along with a looper function. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your pedal to ensure optimal performance and longevity.
설정
전원 연결
The Alter Ego V2 requires a 9V DC power supply, center negative, with a minimum current draw of 100mA. Ensure you use a compatible power adapter to prevent damage to the unit. Connect the power adapter to the 9V DC input jack on the pedal.
오디오 연결
- 악기(예: 기타)를 연결하세요. 입력 페달 오른쪽 측면에 있는 잭에 표준 1/4인치 악기 케이블을 사용하여 연결합니다.
- 연결하다 산출 페달 왼쪽의 잭을 당신의 것에 연결하세요 amp표준 1/4인치 악기 케이블을 사용하여 신호 체인의 다음 페달이나 리파이어를 연결합니다.
- For stereo operation, connect a second cable from the 스테레오 출력 잭에서 두 번째 amp앰프 또는 스테레오 입력 장치.
페달 조작하기
Familiarize yourself with the controls and connections of your Alter Ego V2 pedal. The following image illustrates the layout of the pedal's controls.
그림 1: Front panel of the TC Electronic Alter Ego V2 pedal, showing the three main control knobs (Time, Feedback, Level), the 11-position delay type selector knob, two mini-toggle switches, and the footswitch.
컨트롤 오버view
- 시간 노브: Adjusts the delay time, from short slap-back echoes to long, atmospheric repeats.
- 피드백 노브: Controls the number of repeats. Turn clockwise for more repeats, counter-clockwise for fewer.
- 레벨 노브: 지연된 신호의 볼륨을 설정합니다.
- DELAY TYPE Selector Knob: This 11-position rotary switch allows you to select between various vintage delay models and the TonePrint (TP) slot. The available types include:
- REV M: Reverse Delay with Modulation
- BDM2: Binson Echorec 2 emulation
- CKAT: Copicat Tape Echo emulation
- 2290백만: TC Electronic 2290 Digital Delay with Modulation
- EP1: Echoplex EP-1 emulation
- SP : Space Echo emulation
- T ORG: Tel-Ray Organ Tone emulation
- LP: 루퍼 기능
- DMM C: Deluxe Memory Man Chorus emulation
- EREC2: Echorec 2 emulation (another variant)
- 텍스트: TonePrint slot for custom delay sounds
- Mini-Toggle Switches: Two small switches located between the main knobs. These typically control additional parameters such as modulation depth, subdivision, or other specific characteristics depending on the selected delay type. Refer to the official TC Electronic website for detailed descriptions of each switch's function per delay type.
- 풋스위치: Engages or bypasses the effect. In Looper mode, it controls recording, playback, and overdubbing.
TonePrint Functionality
The Alter Ego V2 supports TC Electronic's TonePrint technology. This allows you to beam custom-tuned delay sounds created by famous guitarists or design your own using the free TonePrint Editor software. To use TonePrint:
- Download the TonePrint App for your smartphone or the TonePrint Editor for your computer from the TC Electronic web대지.
- Select the 'TP' position on the DELAY TYPE selector knob.
- Follow the instructions in the app or software to load a TonePrint into your pedal.
루퍼 작업
When the DELAY TYPE selector is set to 'LP', the pedal functions as a looper. The footswitch controls the looping functions:
- 싱글 프레스: Start recording a loop.
- Single Press (while recording): Stop recording and start playback.
- Double Press (while playing): 재생을 중지합니다.
- Press and Hold (while playing): Undo/Redo last overdub.
- Press and Hold (while stopped): Clear the loop.
유지
The Alter Ego V2 pedal is designed for durability. To ensure its longevity:
- 부드럽고 마른 천으로 닦아 페달을 깨끗하게 유지하세요. 연마성 세제나 용제는 사용하지 마세요.
- 페달을 극한의 온도, 습도, 직사광선으로부터 보호하세요.
- 페달을 떨어뜨리거나 강한 충격을 주지 마세요.
- Ensure all cables are connected securely but do not overtighten.
문제 해결
If you encounter issues with your Alter Ego V2 pedal, consider the following:
- 소리 없음: 모든 케이블 연결을 확인하세요(계기, amplifier, power). Ensure the power supply is correctly connected and providing the correct voltag전자(9V DC).
- 예상치 못한 동작: Ensure the correct delay type is selected. If using TonePrint, verify the TonePrint was loaded correctly. Try resetting the pedal by disconnecting and reconnecting power.
- 소음/웅웅거림: Ensure you are using a regulated power supply. Check for ground loops in your signal chain.
- TonePrint Editor Connectivity Issues: Refer to the support section of the TC Electronic website for the latest drivers and troubleshooting guides for the TonePrint Editor software.
For further assistance, consult the official TC Electronic support resources.
명세서
| 특징 | 사양 |
|---|---|
| 모델 번호 | 960750101 |
| 품목 무게 | 13온스(0.37킬로그램) |
| 제품 치수 | 4.61 x 2.48 x 2.91 인치 |
| Unit Size (approx.) | 3.31인치 x 2.87인치 x 5인치 |
| 전원 | 코드식 전기 |
| 권tage | 9볼트 직류 |
| Amp에라 지 | 0.1밀리amp초(100mA) |
| 신호 형식 | 비슷한 물건 |
| 첫 번째 가능한 날짜 | 24년 2014월 XNUMX일 |
보증 정보
TC Electronic products are covered by a limited warranty. For detailed information regarding the warranty period, terms, and conditions applicable to your Alter Ego V2 pedal, please refer to the official warranty statement available on the TC Electronic web사이트를 방문하거나 고객 지원팀에 직접 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
지원하다
For the latest product information, firmware updates, TonePrint Editor software, and comprehensive support resources, please visit the official TC Electronic web대지:
You can also find FAQs, user forums, and contact information for technical support on their web대지.