스바루 순정 자석식 드레인 플러그(부품 번호 32103KA000) 사용 설명서

1. 서론

This manual provides essential information for the installation, function, and maintenance of your Subaru Genuine Magnetic Drain Plug, part number 32103KA000. This component is designed to replace the standard engine oil drain plug in compatible Subaru vehicles. Its primary function is to attract and retain ferrous metallic particles that may be present in the engine oil, preventing them from circulating and potentially causing wear to internal engine components. Regular inspection and cleaning of the magnetic drain plug can provide insight into the engine's internal condition and contribute to its longevity.

그림 1: Subaru Genuine Magnetic Drain Plug, part number 32103KA000, shown with its official packaging. The packaging confirms the part number and indicates it is a genuine Subaru component manufactured by Fuji Heavy Industries Ltd. in Japan. The drain plug itself is a metallic component with a visible magnetic tip designed to attract and hold ferrous metal particles from engine oil.

2. 차량 호환성

The Subaru Genuine Magnetic Drain Plug (Part No. 32103KA000) is compatible with various Subaru models. Please verify compatibility with your specific vehicle's service manual or a certified Subaru technician before installation.

• 2004-2021 Subaru WRX STI
• 1993-2011 Subaru Impreza
• 1990-2009 Subaru Legacy
• 2001-2013 Subaru Forester
• 2000-2009 스바루 아웃백
• 2006-2014 Subaru Tribeca
• 1990-1993 Subaru Loyale
• 1985-1988 Subaru XT
• 1985-1990 Subaru DL/GL/GL10/RS/RX

3. 설치 지침

Installation of the magnetic drain plug is typically performed during an engine oil change. It is recommended that this procedure be carried out by a qualified technician or an individual with appropriate automotive maintenance experience. Always refer to your vehicle's specific service manual for detailed oil change procedures and torque specifications.

3.1. 안전수칙

• 차량이 평평한 곳에 주차되어 있고 엔진이 식었는지 확인하십시오.
• 안전 안경과 장갑 등 적절한 개인 보호 장비를 착용하세요.
• Support the vehicle securely with jack stands if lifting is required.
• Have a suitable oil drain pan ready to collect used oil.
• 사용된 오일과 필터는 현지 규정에 따라 책임감 있게 폐기하세요.

3.2. 필요한 도구 및 재료

• Wrench or socket for the drain plug (size varies by model, consult service manual).
• 토크 렌치.
• New crush washer (essential for a leak-free seal).
• Oil drain pan.
• Clean rags.
• New engine oil and oil filter (as part of a complete oil change).

3.3. 설치 단계

1. 차량 준비: Position the oil drain pan beneath the engine oil pan.
2. 오래된 배수 플러그 제거: Using the appropriate wrench, carefully loosen and remove the existing drain plug. Allow all old engine oil to drain completely.
3. 깨끗한 구역: Wipe the drain plug opening on the oil pan with a clean rag to remove any residual oil or debris.
4. Prepare New Plug: Place a new crush washer onto the Subaru Genuine Magnetic Drain Plug (Part No. 32103KA000). It is crucial to use a new crush washer with each oil change to ensure a proper seal and prevent leaks.
5. 새 플러그를 설치하세요: Thread the magnetic drain plug into the oil pan by hand to ensure it is not cross-threaded.
6. Torque Plug: Once hand-tight, use a torque wrench to tighten the drain plug to the manufacturer's specified torque. Refer to your vehicle's service manual for the exact torque specification. Overtightening can damage the oil pan threads, while undertightening can lead to leaks.
7. 오일 보충: Proceed with refilling the engine with the specified amount and type of new engine oil.
8. 누출 확인: After refilling and running the engine briefly, check around the drain plug for any signs of oil leakage.

4. 작동 및 기능

The Subaru Genuine Magnetic Drain Plug operates passively. Once installed, its integrated magnet continuously attracts and holds ferrous metallic particles that are suspended in the engine oil. These particles, often microscopic, are byproducts of normal engine wear. By collecting them, the magnetic drain plug helps to keep the engine oil cleaner and reduces the abrasive wear these particles could cause to critical engine components. The plug does not require any active user interaction during vehicle operation.

5. 유지관리

The primary maintenance for the magnetic drain plug occurs during each engine oil change.

5.1. Inspection and Cleaning

1. When removing the drain plug during an oil change, carefully inspect the magnetic tip.
2. Any metallic sludge or fine particles adhering to the magnet should be wiped clean with a rag. The presence of a small amount of fine metallic paste is normal and indicates the magnet is functioning as intended.
3. If large metal shavings or chunks are observed, this may indicate a more significant internal engine issue. In such cases, consult a qualified mechanic for further inspection.
4. Always replace the crush washer with a new one during reinstallation to ensure a proper seal.

5.2. 교체

The magnetic drain plug itself is a durable component and typically does not require regular replacement unless it is damaged (e.g., stripped threads, damaged magnet) or shows signs of wear. Inspect the plug for any damage during each oil change. If damage is found, replace it with a new Subaru Genuine Magnetic Drain Plug (Part No. 32103KA000).

6. 문제 해결

6.1. Oil Leakage from Drain Plug

• 원인: Improperly tightened drain plug (too loose or overtightened), damaged or reused crush washer, damaged oil pan threads.
• 해결책:
  1. Drain a small amount of oil into a clean pan.
  2. 배수 플러그를 제거하십시오.
  3. Inspect the crush washer; replace it with a new one if it's damaged or was reused.
  4. Inspect the drain plug threads and oil pan threads for damage. If damaged, replacement of the plug or repair of the oil pan may be necessary.
  5. Reinstall the drain plug with a new crush washer and tighten to the manufacturer's specified torque.
  6. Check for leaks after refilling oil and running the engine.

6.2. No Metallic Particles on Magnet

• 원인: This is generally a positive indication that your engine is experiencing minimal ferrous wear.
• 해결책: Continue regular oil changes and inspections. If you suspect an issue with the magnet itself, you can test its strength with a small metal object.

7. 사양

8. 보증 및 지원

As a genuine Subaru part, this magnetic drain plug is manufactured to Subaru's quality standards. Specific warranty terms for genuine Subaru parts can vary by region and purchase location. Please retain your proof of purchase. For detailed warranty information or technical support, it is recommended to contact your authorized Subaru dealership or refer to the official Subaru web귀하의 지역에 대한 사이트.

For further assistance, please consult your vehicle's owner's manual or contact a certified Subaru service center.