BN-LINK 24-Hour Plug-in Mechanical Timer

1. 서론

The BN-LINK 24-Hour Plug-in Mechanical Timer (Model FD-60-U1) is designed to automate the operation of various electrical devices by turning them ON and OFF at pre-set times. This grounded timer offers convenience and energy savings for a wide range of indoor applications.

Image 1: BN-LINK 24-Hour Plug-in Mechanical Timer, front view.

2. 안전 정보

• 실내에서만 사용하세요.
• Do not exceed electrical ratings: 125VAC, 60 Hz, 1875W, 15A Resistive, 8A Tungsten, 1/2HP.
• Ensure the timer is securely plugged into a grounded electrical outlet.
• 물에 담그거나 젖은 상태에서 사용하지 마십시오.
• 청소하기 전에 타이머의 플러그를 뽑으세요.
• 어린이의 손이 닿지 않는 곳에 보관하세요.

3. 제품 오버view

Image 2: Labeled diagram of the timer's components.

• 시계 다이얼: Displays 24-hour time.
• 화살: 현재 시간을 나타냅니다.
• 푸시 핀: Small segments around the dial. Each pin represents 15 minutes. Pushed down = ON, Pulled up = OFF.
• 슬라이드 스위치: Allows selection between 'ON' (always on) and 'TIMER' (follows programmed schedule).
• 출력 표시등: Illuminates when the connected device is receiving power.
• 접지 콘센트: Where the appliance is plugged in.

4. 설정

1. Prepare Pins: Ensure all push pins around the clock dial are in the UP (OFF) position before programming.
2. 현재 시간 설정: Rotate the clock dial clockwise until the white arrow aligns with the current time of day. The dial uses a 24-hour format (e.g., 13 for 1 PM, 18 for 6 PM).
3. 플러그인: Insert the timer into a grounded 3-prong electrical outlet.

5. 사용 설명서

Image 3: Pins pushed down activate the device; pins pulled up deactivate it.

1. 프로그램 켜짐/꺼짐 시간: Push down the pins corresponding to the desired ON time. Each pushed-down pin represents 15 minutes of ON time. Leave pins in the UP position for desired OFF times. You can set up to 96 ON/OFF programs per day.
2. 장치 연결: Plug your electrical appliance into the grounded outlet on the timer.
3. 모드 선택: Slide the red switch on the side of the timer to the 'TIMER' position for automatic operation based on your programmed schedule. To keep the device continuously ON, slide the switch to the 'ON' position.
4. The timer will automatically cycle through your programmed settings daily. The red output indicating light will illuminate when the device is ON.

6. 응용 프로그램

This versatile mechanical timer can be used to automate various devices and systems:

• Aquariums and Terrariums (lighting, pumps)
• Grow Lights for Hydroponics and Indoor Plants
• Indoor Lighting (lamps, holiday decorations)
• Small Home Appliances (coffee makers, fans, humidifiers)
• Security Lighting (to simulate occupancy)

이미지 4: Examples of timer applications including humidifiers, lamps, fans, grow lights, aquariums, and coffee machines.

7. 사양

Image 5: Product dimensions and electrical ratings.

8. 문제 해결

• 기기가 켜지거나 꺼지지 않음:
  • 타이머가 전원 콘센트에 단단히 꽂혀 있는지 확인하세요.
  • 기기가 타이머에 제대로 꽂혀 있는지 확인하세요.
  • Check that the side switch is set to 'TIMER' mode.
  • Confirm that the push pins for the desired ON/OFF times are correctly set (down for ON, up for OFF).
  • Ensure the current time arrow is aligned with the actual time on the dial.
• 타이머가 진행되지 않음:
  • The timer's motor may be stuck. Gently rotate the dial to see if it frees up.
  • 타이머에 전원이 공급되고 있는지 확인하십시오.
• 시끄러운 똑딱거리는 소리:
  • Mechanical timers typically produce a soft ticking sound. If the noise is excessively loud or unusual, discontinue use and contact customer support.

9. 보증 및 지원

For warranty information, technical support, or any questions regarding your BN-LINK Mechanical Timer, please refer to the contact information provided with your product packaging or visit the official BN-LINK web대지.

Always ensure to follow all safety guidelines and operating instructions to prevent damage or injury.