1. 서론
Thank you for choosing the TPC Ultrasonic Cleaner UC400. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your ultrasonic cleaner. Please read this manual thoroughly before operating the device and keep it for future reference. The UC400 is designed for professional cleaning applications, utilizing high-frequency sound waves to create cavitation bubbles that gently yet effectively clean various items.
2. 안전 정보
부상이나 장치 손상을 방지하려면 항상 다음 안전 예방 조치를 준수하세요.
- Do not operate the unit without liquid in the tank. Dry running can damage the transducer.
- 제품을 열원 및 직사광선을 피해 안정적이고 평평한 곳에 설치하십시오.
- Do not immerse the main unit in water or other liquids. Only the tank is designed for liquid.
- Always unplug the unit before cleaning, filling, or emptying the tank.
- 초음파 세척기에 적합한 세척액만 사용하십시오. 인화성, 부식성 또는 연마성 세척액은 사용하지 마십시오.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
- Do not touch the tank or solution during operation, as it may become warm.
- If the unit shows signs of damage, do not operate it. Contact qualified service personnel.
3. 제품 오버view
The TPC Ultrasonic Cleaner UC400 features a durable stainless steel tank and cover, designed for efficient and thorough cleaning.
그림 1: TPC Ultrasonic Cleaner UC400. This image shows the compact design of the ultrasonic cleaner, featuring a stainless steel tank at the top, a blue front panel with the "TPC" logo, and a digital control panel with a display and buttons at the bottom. Handles are visible on the sides.
구성 요소:
- 스테인레스 스틸 탱크: Holds the cleaning solution and items to be cleaned.
- 스테인리스 스틸 커버: Reduces noise and prevents splashing during operation.
- 제어판: Features a digital display for time and temperature settings, along with control buttons.
- 전원 코드: 장치를 전기 콘센트에 연결합니다.
- 배수 밸브: Located at the bottom for easy emptying of the tank.
4. 설정
- 짐 풀기: Carefully remove the ultrasonic cleaner from its packaging. Inspect for any signs of damage. Retain packaging for future transport or storage.
- 놓기: Place the unit on a firm, level, and dry surface. Ensure there is adequate ventilation around the unit. Do not place it near heat sources or in direct sunlight.
- 전원 연결: Ensure the power switch is in the OFF position. Connect the power cord to a grounded electrical outlet with the correct voltag(사양을 참조하십시오).
- 탱크 채우기: Open the cover and fill the stainless steel tank with the appropriate cleaning solution. Do not exceed the MAX fill line. Ensure the items to be cleaned are fully submerged but do not touch the bottom of the tank directly. Use a basket if provided.
5. 사용 설명서
- 전원 켜기: Plug in the unit and turn on the main power switch. The digital display will illuminate.
- 청소 시간 설정: Use the "Time" buttons on the control panel to set the desired cleaning duration. Typical cleaning cycles range from 5 to 15 minutes, depending on the items and level of contamination.
- Set Temperature (if applicable): If your model has a heating function, use the "Temp" buttons to set the desired solution temperature. Heating the solution can improve cleaning efficiency for certain applications. Allow time for the solution to reach the set temperature.
- 청소 시작: Press the "Start/Stop" button to begin the ultrasonic cleaning process. The unit will emit a high-frequency hum.
- 작동 중: Keep the cover closed during operation to minimize noise and prevent splashing. Do not touch the tank or solution.
- 사이클 종료: The unit will automatically stop when the set time expires. You can also press the "Start/Stop" button to manually stop the process at any time.
- 항목 제거: Carefully open the cover. Use gloves or a basket to remove the cleaned items from the tank. Rinse items thoroughly with clean water if necessary and dry them.
- 전원 끄기 : Turn off the main power switch and unplug the unit from the electrical outlet.
6. 유지관리
정기적인 유지관리를 통해 초음파 세척기의 수명과 최적의 성능을 보장할 수 있습니다.
- 탱크 배수: After each use or when the solution becomes visibly dirty, drain the tank using the drain valve.
- 탱크 청소: Rinse the tank with clean water. For stubborn residues, use a soft cloth and a mild, non-abrasive cleaner. Do not use harsh chemicals or abrasive pads.
- 외부 청소: 광고로 장치의 외부를 닦습니다.amp cloth. Do not spray water directly onto the control panel or main unit.
- 솔루션 교체: Always use fresh cleaning solution for optimal results. Do not reuse heavily contaminated solutions.
- 저장: When not in use, ensure the unit is clean, dry, and stored in a cool, dry place.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 장치의 전원이 켜지지 않습니다. | No power supply; power cord not connected; power switch off. | Check power outlet; ensure power cord is securely plugged in; turn on power switch. |
| No ultrasonic action (no hum). | Tank empty; unit not started; faulty transducer. | Fill tank with solution; press "Start" button; contact service if problem persists. |
| 세척 결과가 좋지 않음. | Incorrect solution; insufficient cleaning time; overloaded tank; solution too cold. | Use appropriate cleaning solution; increase cleaning time; reduce load; allow solution to heat up. |
| 장치가 과열되었습니다. | Prolonged operation; insufficient ventilation. | Allow unit to cool down; ensure proper ventilation around the unit. |
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 | UC400 |
| 상표 | 티피씨 |
| 품목 무게 | 24 파운드 |
| 품목 형태 | Stainless steel cover and tank with welded drain |
| 제품의 특정 용도 | Sweep technology ensures exceptional cleaning efficiency |
| 단위 수 | 1.0 카운트 |
| 항목 수 | 1 |
9. 보증 및 지원
For warranty information, technical support, or service inquiries, please contact your authorized TPC dealer or visit the official TPC website. Please have your model number (UC400) and purchase date available when contacting support.
메모: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is intended for professional cleaning applications.
