1. 서론
This manual provides essential instructions for the proper installation and maintenance of your DTM Ariens Compatible Snowblower Auger Gear and Shaft Rebuild Kit. This kit is designed to replace worn or damaged auger worm gears and shafts in compatible Ariens snowblower models. Please read this manual thoroughly before proceeding with any installation or maintenance to ensure safe and effective operation.
2. 제품 오버view
The DTM rebuild kit includes both the auger worm gear and the auger shaft, manufactured to meet or exceed original specifications. These components are crucial for the proper functioning of your snowblower's auger system, which collects and expels snow.
그림 2.1: The DTM Ariens Compatible Snowblower Auger Gear and Shaft Rebuild Kit, showing both the worm gear and the shaft.
그림 2.2: 자세한 view of the DTM Ariens Compatible Snowblower Auger Worm Gear, highlighting its construction.
그림 2.3: Technical diagram illustrating the dimensions of the auger gear, including 1" ID Bore, 5/16" Crosspin, 1.500" diameter, 1.063" width, 1.920" overall height, and 20 gear teeth. This diagram is crucial for verifying compatibility.
그림 2.4: Technical diagram illustrating the dimensions of the auger shaft, including a 1/2" pilot, 3/16" diameter thruhole, 1/4" diameter thruhole, 3/4" diameter section, and a woodruff key slot. Key measurements are 3-3/8", 11-3/4", 12-3/4", and 17-1/2" for various sections. This diagram is crucial for verifying compatibility.
The kit is proudly manufactured in the USA, ensuring quality and durability.
그림 2.5: Image indicating the product is Made in USA.
3. 호환성
This rebuild kit is designed to replace Ariens part numbers 52402600 and the obsolete part 52422700. It is compatible with a wide range of Ariens snowblower models. It is critical to compare the dimensions and number of teeth of your existing parts with the diagrams provided in this manual (Figures 2.3 and 2.4) to ensure proper fitment.
Known Compatible Ariens Models:
- 924027 (001001) ST8
- 924036 (000101) ST524
- 924039 (000101) ST824
- 924040 (000101) ST824
- 924046 (000101) ST524, (012001) ST524, (014501) ST524
- 924048 (000101) ST724, (019001) ST724, (024501) ST724
- 924050 (000101) ST824, (027001) ST824, (036501) ST824
- 924054 (000101) ST832
- 924072 (000101) ST824
- 924080 (000101) TT 8
- 924081 (000101) ST824S
- 924082 (000101) ST824, (011145) ST824, (039200) ST824
- 924093 (000101) ST924, (001700) ST924
- 924100 (000101) ST824, (008200) ST824
- 924102 (002600) ST1032
- 924104 (001400) ST1028
- 924105 (000200) TT 8
- 924106 (002200) ST1024
- 924107 (000101) ST1336LE
- 924108 (000101) ST824
- 924109 (000101) ST1028
- 924110 (000101) ST824
- 924118 (000101) ST8524
- 924119 (000101) ST1028
- 924121 (000101) ST1128
- 924311 (000101) ST824
- 924312 (000150) ST924
- 924318 (000101) ST824, (000500) ST824
- 924319 (000101) ST924E
- 924323 (000101) ST1024
- 924324 (000101) ST1128LE
- 924325 (000101) ST1132LE
- 924326 (000101) ST1336LE
- 924328 (000101) ST824
- 924329 (000101) ST928
- 924550 (000101) ST824
- 924551 (000101) ST8524
- 932308 (000101) ST824
- 932309 (000101) ST824
- 932500 (000101) ST520
- 932501 (000101) ST724
- 932502 (000101) ST8524LE
If your model is not listed, please verify compatibility by comparing the dimensions of your original parts with the provided diagrams before purchase or installation.
4. 안전 정보
Always prioritize safety when working with power equipment and mechanical components. Failure to follow safety precautions can result in serious injury or damage to equipment.
- 전원 분리: Before beginning any work on your snowblower, ensure the engine is off, the spark plug wire is disconnected, and the key is removed to prevent accidental starting.
- 보호 장비를 착용하세요: 안전 안경, 장갑, 튼튼한 신발 등 적절한 개인 보호 장비(PPE)를 항상 착용하세요.
- 기기를 안전하게 고정하세요: Ensure the snowblower is stable and cannot move during maintenance. Use wheel chocks if necessary.
- Read Snowblower Manual: Refer to your snowblower's original owner's manual for specific disassembly and reassembly procedures.
- 부품을 조심스럽게 다루십시오: Components may have sharp edges or be heavy. Handle with care to avoid injury.
- 적절한 도구: 부품 손상이나 부상을 방지하려면 각 작업에 맞는 올바른 도구를 사용하십시오.
5. 설치 지침
Replacing the auger gear and shaft requires mechanical aptitude. If you are unsure about any step, it is recommended to consult a qualified service technician.
- 준비:
- Ensure the snowblower is on a flat, stable surface.
- Disconnect the spark plug wire and remove the ignition key.
- Gather necessary tools, which typically include wrenches, sockets, screwdrivers, a hammer, and a punch for roll pins.
- Access the Auger Housing:
- Depending on your snowblower model, you may need to remove the belt cover, chute, or other components to gain access to the auger gearbox.
- Carefully remove any shear pins or bolts securing the auger assembly.
- 오래된 구성 요소 제거:
- Locate the auger gearbox. You will typically find the worm gear and shaft inside.
- Remove any retaining clips, bolts, or roll pins that secure the old worm gear and shaft. Note their orientation for reassembly.
- Carefully extract the old auger shaft and worm gear. Inspect surrounding components for wear or damage.
- 새로운 구성 요소 설치:
- Apply a small amount of appropriate grease to the new auger shaft and the bore of the new worm gear.
- Slide the new worm gear onto the auger shaft, ensuring the cross-pin hole aligns correctly.
- Insert the new auger shaft and worm gear assembly into the gearbox housing.
- Secure the worm gear to the shaft using a new roll pin (not included in this kit, often recommended for replacement).
- Ensure all components are seated correctly and move freely without binding.
- 재조립:
- Reattach any covers, belts, or chute components that were removed.
- 모든 고정 장치가 제조업체의 규격에 맞게 조여졌는지 확인하십시오.
- Replace shear pins with new ones if they were removed or damaged.
- 최종 확인:
- Before starting the engine, manually rotate the auger to ensure smooth operation and no obstructions.
- 점화 플러그 와이어를 다시 연결하십시오.
- Perform a test run in a clear area, following your snowblower's operating instructions.
Note: New roll pins are often recommended for replacement during this process but are not included in this kit. Please acquire them separately if needed.
6. 유지관리
Proper maintenance extends the life of your snowblower components, including the auger gear and shaft.
- 매끄럽게 하기: Periodically check the auger gearbox for proper lubrication levels as specified in your snowblower's manual. Use only recommended lubricants.
- 점검: Regularly inspect the auger gear and shaft for signs of wear, corrosion, or damage, especially after heavy use.
- 장애물 제거: Always clear any foreign objects (rocks, sticks, etc.) from the auger housing immediately to prevent damage to the auger and gearbox components.
- 전단 핀: Ensure shear pins are in good condition and replace them with the correct type if they break or show signs of fatigue. Shear pins are designed to protect the auger gearbox from damage.
7. 사양
| 제품 이름: | DTM Ariens Compatible Snowblower Auger Gear and Shaft Rebuild Kit |
| 상표: | 디티엠 |
| 부품 번호를 대체합니다: | Ariens 52402600, 52422700 (obsolete) |
| 재료: | High-quality metals |
| 제품 크기(패키지): | 18 x 2 x 2 인치 |
| 품목 무게: | 3파운드 |
| 제조 원산지: | 미국 |
| Auger Gear Details: | 1" ID Bore, 5/16" Crosspin, 1.500" diameter, 1.063" width, 1.920" overall height, 20 teeth (Refer to Figure 2.3) |
| Auger Shaft Details: | 1/2" Pilot, 3/16" Dia. Thruhole, 1/4" Dia. Thruhole, 3/4" Dia. section, Woodruff Key slot, 17-1/2" total length (Refer to Figure 2.4) |
8. 보증 및 지원
For questions regarding this DTM Ariens Compatible Snowblower Auger Gear and Shaft Rebuild Kit, including compatibility verification or installation assistance, please contact the manufacturer or your point of purchase. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.
It is recommended to consult with a qualified technician for complex installations or if you encounter issues beyond basic troubleshooting.
