소개
This manual provides instructions for the safe and proper installation and use of your Flexson FLXP1WB2021 Wall Bracket, designed specifically for Sonos Play:1 speakers. Please read this manual thoroughly before installation and retain it for future reference.
안전 정보
경고:
Improper installation can lead to equipment damage or personal injury. If you are unsure about the installation process, consult a qualified professional.
- Ensure the wall material is suitable for supporting the weight of the bracket and speaker.
- Use appropriate wall mounting hardware (screws and anchors) for your specific wall type. Wall mounting hardware is not included with this product.
- Do not exceed the maximum weight capacity of the bracket. This bracket is designed for Sonos Play:1 speakers only.
- 작은 부품은 어린이의 손이 닿지 않는 곳에 보관하세요.
패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- 2 x Flexson Wall Brackets (FLXP1WB2021)
- 사용 설명서 (본 문서)
메모: Sonos Play:1 speakers and wall mounting hardware (screws, anchors) are not included.
설정 및 설치
Follow these steps to install your Flexson wall bracket:
- 장착 위치 준비: Choose a suitable wall location, ensuring it can support the weight of the speaker and bracket. Mark the desired drilling points for the wall bracket.
- 드릴 파일럿 홀: Using an appropriate drill bit for your wall type and chosen mounting hardware, drill pilot holes at the marked locations.
- 벽걸이 브래킷 부착: Securely fasten the wall bracket to the wall using suitable screws and wall anchors (not supplied). Ensure the bracket is level and firmly attached.
- Attach Speaker to Bracket: The Flexson bracket features a unique 2-piece design for easy assembly. Align your Sonos Play:1 speaker with the bracket's mounting points. The bracket allows for neat cable routing.
- 보안 스피커: Use the provided screw to secure the Sonos Play:1 speaker to the bracket. Ensure it is tightened sufficiently to hold the speaker firmly.
- 케이블 관리 : Route the speaker's power cable neatly through the designated channels on the bracket to maintain a clean appearance.
Figure 1: Flexson FLXP1WB2021 Wall Brackets. These brackets are designed to securely hold Sonos Play:1 speakers.
Figure 2: Dimensional drawing of the Flexson wall bracket, illustrating various measurements for installation planning.
작동 및 조정
Once installed, the Flexson wall bracket offers flexible positioning for your Sonos Play:1 speaker:
- 기울이기: The bracket allows for a 15° downward tilt, enabling you to direct sound towards your listening area.
- 회전: You can swivel the speaker 40° left and 40° right to optimize sound dispersion.
- 역방향 장착: The bracket supports mounting the speaker upside down. This feature allows easier access to the speaker's on-device controls when mounted higher on a wall.
유지
To maintain the appearance and functionality of your Flexson wall bracket:
- Clean the bracket with a soft, dry cloth.
- 연마성 세척제나 용제는 마감재를 손상시킬 수 있으므로 사용하지 마십시오.
- Periodically check all mounting screws to ensure they remain tight and secure.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Speaker feels unstable or loose. | Mounting screws are not tight enough, or incorrect wall anchors were used. | Ensure all wall mounting screws and the speaker attachment screw are securely tightened. Verify that appropriate wall anchors were used for your wall type. |
| 기울기 또는 회전 조절에 어려움이 있습니다. | Mechanism may be stiff or overtightened. | Apply gentle force. Do not force adjustments if resistance is excessive. Check for any obstructions. |
명세서
- 모델 번호: FLXP1WB2021
- 호환성: Sonos Play:1 Speakers
- 재료: 강철
- 색상: 검은색
- 기울기 조정: 15° downwards
- 회전 조정: 왼쪽 40°, 오른쪽 40°
- 제품 크기: 5.47 x 3.62 x 1.77인치(139 x 92 x 45mm)
- 품목 무게: 7 온스(198그램)
- 제조업체: 플렉스슨
보증 및 지원
보증 정보 및 기술 지원에 대해서는 Flexson 공식 웹사이트를 참조하십시오. web사이트를 방문하거나 판매점에 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
