1. 서론
This manual provides essential instructions for the installation, operation, maintenance, and troubleshooting of your Intel D875PBZ Motherboard. This product is designed for use with Intel Pentium 4 processors and features the Intel 875P chipset. Please read this manual thoroughly before proceeding with installation.
그림 1: 클로즈업 view of the Intel D875PBZ model designation on the motherboard.
2. 설정 및 설치
Follow these steps carefully to install your Intel D875PBZ Motherboard and its components.
2.1. 마더보드 설치
- 섀시 준비: Ensure your computer case is compatible with ATX form factor motherboards. Install the I/O plate into the rear opening of the chassis.
- 마더보드 장착: Carefully align the motherboard with the standoffs in your chassis. Secure it using appropriate screws. Do not overtighten.
그림 2: 상향식 view of the Intel D875PBZ motherboard, showing the CPU socket, RAM slots, and expansion slots.
2.2. CPU 설치 (소켓 478)
- CPU 소켓 열기: Lift the lever on the Socket 478 CPU socket.
- CPU 삽입: Align the triangular mark on the Intel Pentium 4 CPU with the corresponding mark on the socket. Gently place the CPU into the socket. Do not force it.
- 보안 CPU: Lower the lever to lock the CPU into place.
- CPU 쿨러 설치: Note: A CPU cooler is NOT included with this product. Install a compatible Socket 478 CPU cooler (fan and heatsink) according to its manufacturer's instructions. Ensure proper thermal paste application and secure mounting for effective cooling.
2.3. RAM Installation (DDR)
- Open RAM Slot Clips: Open the retention clips at both ends of the DDR RAM slots.
- RAM 모듈 삽입: Align the notch on the DDR RAM module with the key in the RAM slot. Press down firmly on both ends of the module until the clips snap into place.
2.4. 주변기기 연결하기
- 전원 커넥터 : 파워서플라이의 20핀 ATX 메인 전원 커넥터와 4핀 ATX 12V 전원 커넥터를 마더보드에 연결하십시오.
- 저장 장치: Connect SATA drives to the SATA ports and IDE drives to the IDE connectors on the motherboard.
- 확장 카드: Install AGP graphics cards into the AGP slot and other expansion cards (e.g., sound cards, network cards) into the PCI slots.
- 전면 패널 커넥터: Connect the power switch, reset switch, HDD LED, and power LED cables from your chassis front panel to the corresponding pins on the motherboard. Refer to the motherboard's silkscreen labels for correct orientation.
- USB 및 오디오: Connect front panel USB and audio headers if available on your chassis.
그림 3: 후면 view of the Intel D875PBZ motherboard, showing the various input/output ports including PS/2, serial, parallel, USB, Ethernet, and audio jacks.
3. 사용 설명서
3.1. 초기 부팅
- 전원 켜기: After all components are securely installed and connected, connect your monitor, keyboard, and mouse. Power on your system.
- BIOS 접근: During the initial boot sequence, press the designated key (commonly 델, F2, 또는 F10) to enter the BIOS setup utility. Consult your screen for the exact key prompt.
- BIOS 구성: Configure boot order, date/time, and other system settings as needed. Save changes and exit the BIOS.
3.2. 운영체제 설치
Insert your operating system installation media (e.g., CD/DVD) and follow the on-screen prompts to install the operating system. Ensure all necessary drivers for the chipset, audio, and network are installed after the OS installation for optimal performance.
4. 유지관리
정기적인 유지관리는 마더보드의 수명과 안정적인 작동을 보장하는 데 도움이 됩니다.
- 먼지 제거: Periodically open your computer case and use compressed air to remove dust buildup from the motherboard, CPU cooler, and other components. Dust can impede airflow and cause overheating.
- 연결 확인: Ensure all power cables, data cables, and expansion cards are securely seated. Loose connections can lead to system instability.
- BIOS 배터리: The motherboard uses a CR2032 coin cell battery to retain BIOS settings. If your system consistently loses time or BIOS settings, the battery may need replacement.
5. 문제 해결
이 섹션에서는 일반적으로 발생할 수 있는 문제에 대해 설명합니다.
- 전원 없음/POST 불가:
- Verify all power cables (20-pin ATX, 4-pin 12V) are securely connected.
- CPU와 RAM이 올바르게 설치되었는지 확인하십시오.
- Check that the power supply is functioning correctly.
- Remove all non-essential components (e.g., extra RAM, expansion cards) and attempt to boot with only the CPU, one RAM stick, and the graphics card.
- 디스플레이 없음:
- Ensure the monitor is connected to the graphics card (AGP) and powered on.
- Reseat the graphics card. Try a different graphics card if available.
- Check RAM installation. Faulty or improperly seated RAM can prevent display output.
- 시스템 불안정/충돌:
- Check CPU and chipset temperatures. Ensure CPU cooler is properly installed and fan is spinning.
- 메모리 진단 도구를 실행하여 RAM에 오류가 있는지 확인하십시오.
- 모든 드라이버가 최신 상태인지 확인하세요.
- 연결이 느슨하거나 케이블이 손상되었는지 확인하십시오.
- BIOS 재설정: To clear CMOS settings, locate the CLR_CMOS jumper on the motherboard (refer to the silkscreen). With the system powered off and unplugged, move the jumper from pins 1-2 to 2-3 for 5-10 seconds, then return it to 1-2. Alternatively, remove the BIOS battery for a few minutes.
6. 사양
Key technical specifications for the Intel D875PBZ Motherboard:
| 특징 | 세부 사항 |
|---|---|
| 상표 | 인텔 |
| 모델 번호 | D875PBZ |
| CPU 소켓 | 소켓 478 |
| 호환 프로세서 | 인텔 펜티엄 4 |
| 칩셋 유형 | Intel 875P |
| RAM 메모리 기술 | DDR |
| 메모리 저장 용량(최대) | 4GB (XNUMX기가바이트) |
| 그래픽 카드 인터페이스 | AGP, PCI |
| 시스템 버스 표준 지원 | SATA 3 (Note: This refers to the SATA controller, actual speed may vary based on chipset generation) |
| S/PDIF 커넥터 유형 | 광학 |
| 패키지 크기 | 14 x 12 x 7 인치 |
| 품목 무게 | 4파운드 |
| 첫 번째 이용 가능 날짜 | 28년 2014월 XNUMX일 |
7. 보증 정보
This product is typically covered by a limited warranty provided by the original seller or manufacturer. Please refer to your purchase documentation or contact your retailer for specific warranty terms and conditions. Keep your proof of purchase for warranty claims.
8. 기술 지원
For technical assistance, please refer to the official Intel support website or contact your product retailer. Online resources often include updated drivers, FAQs, and community forums that can provide further assistance.
