ScreenBeam MyWirelessTV2 Wireless HD Transmitter & Receiver Extender User Manual

소개

The ScreenBeam MyWirelessTV2 system provides a wireless solution for transmitting high-definition video and audio from your HDMI-enabled media devices to an HDTV or projector. This system eliminates the need for long HDMI cables, offering flexibility in TV placement and reducing cable clutter. It supports Full HD 1080P resolution and 5.1 surround sound, with a range of up to 150 feet through walls, floors, and ceilings.

무엇이 포함됩니까?

설치를 시작하기 전에 패키지에 모든 구성 요소가 들어 있는지 확인하세요.

• 1 Wireless HD Transmitter
• 1 Wireless HD Receiver
• 2 개의 전원 어댑터
• 2 HDMI 케이블
• 1 IR 블래스터 케이블
• 1 IR Receiver Extension Cable
• 2 Velcro Adhesive Mounts
• 빠른 시작 가이드

Figure 1: Package Contents of MyWirelessTV2 Kit

설치 지침

Follow these steps to set up your MyWirelessTV2 system:

1. 송신기를 연결하십시오: Connect one end of an HDMI cable to the HDMI output of your media source (e.g., cable box, Blu-ray player, gaming console). Connect the other end of the HDMI cable to the HDMI 입력 port on the MyWirelessTV2 Transmitter.
2. 송신기 전원 연결: Plug one power adapter into the 5V 직류 / 2A port on the Transmitter and then into a power outlet. The Power LED on the transmitter will illuminate.
3. 수신기를 연결하십시오: Connect one end of the second HDMI cable to the HDMI Out to TV port on the MyWirelessTV2 Receiver. Connect the other end of the HDMI cable to an available HDMI input on your HDTV or projector.
4. Connect Receiver Power: Plug the second power adapter into the 5V 직류 / 2A port on the Receiver and then into a power outlet. The Power LED on the receiver will illuminate.
5. IR Blaster Setup (Optional): If you wish to control your source device (e.g., cable box) from the TV location, connect the IR Blaster cable to the IR 전송 port on the Transmitter. Position the IR Blaster emitter directly over the IR sensor of your source device. Connect the IR Receiver Extension Cable to the IR 내선 port on the Receiver and place the IR receiver in a location where it can receive signals from your remote control.
6. 전원 켜기 장치: Ensure both the Transmitter and Receiver are powered on. Turn on your TV and select the correct HDMI input for the Receiver. The system will automatically establish a wireless connection.

Figure 2: Transmitter and Receiver Port Diagram

작동 지침

Once the MyWirelessTV2 system is set up, it operates automatically. The Transmitter and Receiver will establish a connection and begin streaming content from your source device to your display.

주요 특징:

• 고화질 스트리밍: Enjoy clear 1080p60 HD video and 3D content.
• 디지털 오디오: Supports 5.1 digital audio for an immersive sound experience.
• 확장된 범위: Transmits signals up to 150 feet through walls, floors, and ceilings.
• IR Remote Control Support: Use your existing remote control to manage your source device from the TV location via the IR Blaster and Receiver cables.
• Multi-Room Capability: Sends live HD content wirelessly to up to 3 HDTVs simultaneously (additional receivers sold separately).
• Wi-Fi 필요 없음: The system operates on its own wireless frequency, independent of your home Wi-Fi network.

호환 장치:

The MyWirelessTV2 system is compatible with a wide range of HDMI-enabled devices, including:

• Cable and Satellite Set-Top Boxes
• Blu-ray and DVD Players
• Gaming Consoles (e.g., Xbox, PlayStation)
• Streaming Media Devices
• Any device with an HDMI output

Figure 3: Compatible HDMI Devices

Figure 4: Indoor Wireless Setup Example

Figure 5: Outdoor Wireless Setup Example

유지

The MyWirelessTV2 system requires minimal maintenance. To ensure optimal performance and longevity:

• Keep the Transmitter and Receiver units clean by wiping them with a soft, dry cloth.
• Ensure proper ventilation around both units to prevent overheating. Avoid placing them in enclosed spaces without airflow.
• Protect the units from extreme temperatures, moisture, and direct sunlight.
• 모든 케이블 연결을 주기적으로 점검하여 안전한지 확인하세요.

문제 해결

If you encounter issues with your MyWirelessTV2 system, refer to the following troubleshooting tips:

1. No Picture/Sound or Intermittent Signal:
   • Ensure both the Transmitter and Receiver are powered on and their power LEDs are illuminated.
   • Verify that all HDMI cables are securely connected to both the source device, Transmitter, Receiver, and TV.
   • Confirm your TV is set to the correct HDMI input for the Receiver.
   • Check the distance between the Transmitter and Receiver. While rated for up to 150 feet, environmental factors (thick walls, metal objects, other wireless devices) can reduce range. Try moving the units closer together.
   • Experiment with the orientation and placement of both the Transmitter and Receiver. Sometimes a slight adjustment (e.g., placing a unit on its side) can improve signal strength.
   • Minimize obstructions between the Transmitter and Receiver. Large metal objects, concrete walls, or multiple layers of building materials can interfere with the wireless signal.
   • If the screen shows a 'Connecting to Transmitter' message for an extended period, try power cycling both the Transmitter and Receiver.
2. 적외선 리모컨이 작동하지 않습니다.
   • Ensure the IR Blaster cable is securely connected to the Transmitter and its emitter is positioned directly over the IR sensor of your source device.
   • Verify the IR Receiver Extension Cable is connected to the Receiver and placed where it can clearly receive signals from your remote.
   • Check for any obstructions between your remote control and the IR Receiver.
3. Picture Quality Issues (Fuzzy/Compressed):
   • This can sometimes occur briefly upon initial connection or power-up. The system should quickly adjust to optimal quality. If it persists, refer to the signal troubleshooting steps above.

명세서

보증 정보

For detailed warranty information regarding your ScreenBeam MyWirelessTV2, please refer to the official ScreenBeam web웹사이트 또는 제품에 동봉된 보증 카드를 참조하십시오. 보증 조건은 지역 및 판매점에 따라 다를 수 있습니다.

고객 지원

If you require further assistance or have questions not covered in this manual, please visit the official ScreenBeam support website for FAQs, software updates, and contact information for technical support.