Ahuja TZA2000DP 2존 PA 믹서 Ampliifier 사용 설명서

1. 서론

The Ahuja TZA2000DP is a versatile 2-zone PA mixer amplifier designed for public address applications requiring independent control over two distinct audio zones. This manual provides essential information for the proper setup, operation, and maintenance of your amp최적의 성능과 수명을 보장하는 리파이어.

2. 안전 지침

• Read all instructions thoroughly before operating the amp리퍼.
• 유지하다 amplifier away from water or excessive moisture.
• 통풍구를 막지 마십시오. 기기 주변에 충분한 공기 흐름이 확보되도록 하십시오.
• 제조사가 지정한 부착물과 액세서리만 사용하세요.
• 모든 정비는 자격을 갖춘 서비스 담당자에게 맡기십시오. 직접 수리하려고 하지 마십시오.
• 번개가 칠 때나 장기간 사용하지 않을 때는 전원 코드를 뽑아 두세요.

3. 제품 오버view

The Ahuja TZA2000DP features 6 microphone inputs, 2 auxiliary inputs, and a dedicated CD/Stereo input (L&R). It also includes a built-in MP3 player with remote control, supporting USB and SD/MMC card readers. This amplifier is suitable for medium-sized installations, such as places of worship, where independent control of two speaker groups is required.

3.1 전면 패널 컨트롤

그림 1: 앞쪽 view of the Ahuja TZA2000DP 2 Zone PA Mixer Amplifier, displaying input controls, tone adjustments, and master volume for both zones.

The front panel provides access to all primary controls for audio input, mixing, and output. Key elements include:

• 마이크 입력 단자(MIC 1-6): Individual 1/4-inch jack inputs with dedicated volume controls.
• 보조 입력(AUX 1-2): Inputs for external audio sources with individual volume controls.
• CD/Stereo Input: RCA inputs for stereo audio sources.
• MP3 플레이어 컨트롤: Buttons for playback, pause, track selection, mode, and a USB/SD card slot.
• 톤 컨트롤: Bass and Treble adjustments for overall sound shaping.
• Zone 1 & Zone 2 Controls: Independent volume and tone controls for each output zone.
• 마스터 볼륨: 전체 볼륨 조절 amp리퍼 출력.
• 전원 스위치: 돌리려면 amp라이터를 켜거나 끕니다.

3.2 후면 패널 연결

The rear panel typically houses the main power input, speaker output terminals for Zone 1 and Zone 2, and additional input/output connections. Ensure all connections are secure before operation.

4. 설정

1. 놓기: 위치 amplifier on a stable, level surface. Ensure adequate ventilation by leaving sufficient space around the unit to prevent overheating.
2. 전원 연결: 연결하다 amplifier's power cord to a suitable AC power outlet. Ensure the power switch on the front panel is in the OFF position before connecting.
3. 스피커 연결: Connect your speakers to the designated Zone 1 and Zone 2 output terminals on the rear panel. Pay close attention to polarity (+ and -) and ensure the speaker impedance matches the ampLifier의 사양입니다.
4. 입력 연결:
   • 마이크: Plug microphones into the MIC 1-6 inputs on the front panel.
   • 보조 장치: Connect devices like laptops, phones, or other audio players to the AUX 1 or AUX 2 inputs.
   • CD/Stereo Player: Connect a CD player or stereo source to the CD/Stereo RCA inputs.

5. 사용 설명서

1. 전원 켜기: 모든 연결이 완료되면 스위치를 켜십시오. amplifier's power switch to the ON position.
2. 입력 레벨 조정: Gradually increase the volume control for the specific input (MIC, AUX, CD/Stereo) you are using.
3. MP3 Player Operation: Insert a USB drive or SD/MMC card into the respective slot. Use the MP3 player controls (Play/Pause, Next/Previous, Mode) to select and play audio files. The remote control can also be used for convenience.
4. 구역 제어: Adjust the individual Zone 1 and Zone 2 volume controls to set the desired output level for each speaker group.
5. 톤 조정: Use the Bass and Treble controls to fine-tune the overall sound quality to your preference.
6. 마스터 볼륨: Adjust the Master Volume control for the overall output level of the amp리퍼.
7. 전원 끄기 : When finished, turn all volume controls down before switching the ampLIFIER OFF.

6. 유지관리

• 청소: 정기적으로 외부를 청소하세요. amplifier with a soft, dry cloth. Do not use liquid cleaners or solvents.
• 통풍: Ensure that the ventilation grilles are kept clear of dust and debris to prevent overheating.
• 저장: 저장하는 경우 amplifier for an extended period, disconnect it from power, clean it, and store it in a cool, dry place.

7. 문제 해결

• 전원 없음:
  • 전원 코드가 콘센트 양쪽에 제대로 꽂혀 있는지 확인하십시오. amp리파이어와 벽면 콘센트.
  • 전원 콘센트가 작동하는지 확인하세요.
  • 확인하세요 amplifier's fuse (if accessible and user-replaceable, refer to the fuse replacement guide).
• 사운드 출력 없음:
  • Ensure all input and speaker connections are correct and secure.
  • Check that the input source (microphone, AUX device, MP3 player) is active and producing sound.
  • Verify that the input volume controls, Zone volume controls, and Master Volume are turned up.
  • Confirm that the correct input is selected (if applicable).
• 왜곡된 소리:
  • Reduce the input volume level of the source device or the amp증폭기의 입력 이득.
  • 스피커 임피던스 호환성을 확인하십시오. amp리퍼.
  • Ensure speaker cables are not damaged or short-circuited.

8. 사양

9. 보증 및 지원

For warranty information, service, or technical support, please contact your authorized Ahuja dealer or visit the official Ahuja web사이트. 보증 청구에 대비해 구매 증빙 자료로 구매 영수증을 보관하세요.