인텔 P3700 시리즈 SSD SSDPEDMD800G401 사용 설명서

1. 서론

This manual provides essential information for the proper installation, operation, and maintenance of your Intel P3700 Series Solid State Drive (SSD) model SSDPEDMD800G401. The Intel P3700 Series SSD is designed for data center environments, offering high performance and reliability through its PCIe NVMe interface. Please read this manual thoroughly before proceeding with installation or use.

2. 안전 정보

Observe the following safety precautions to prevent damage to the SSD and ensure personal safety:

• 정전기 방전(ESD) 예방 조치: Always handle the SSD by its edges and use an anti-static wrist strap or other grounding methods to prevent ESD damage.
• 전원 끄기 : Ensure the host system is completely powered off and disconnected from all power sources before installing or removing the SSD.
• 전문적인 설치: Installation should be performed by qualified personnel familiar with computer hardware and ESD procedures.
• 물리적 취급: Avoid dropping or subjecting the SSD to excessive force. Do not attempt to open the SSD enclosure.

3. 패키지 내용

패키지에 다음 품목이 포함되어 있는지 확인하십시오.

• Intel P3700 Series SSD (Model SSDPEDMD800G401)
• 문서 (예: 빠른 시작 가이드, 보증 정보)
• Note: Additional mounting hardware or accessories may vary by reseller.

4. 설정 및 설치

The Intel P3700 Series SSD is available in various form factors, including a PCIe Add-in Card (AIC) and a 2.5-inch U.2 form factor. This manual primarily addresses the AIC installation. Ensure your system has a compatible PCIe slot (e.g., PCIe 3.0 x4 or higher) and sufficient physical clearance.

4.1. Physical Installation (PCIe Add-in Card)

1. 시스템 준비: Power down your computer completely and unplug the power cord. Open the computer case.
2. PCIe 슬롯 찾기: Identify an available PCIe slot (typically PCIe x4, x8, or x16) that is compatible with the SSD's form factor.
3. 슬롯 커버 제거: 선택한 PCIe 슬롯에 해당하는 컴퓨터 케이스 뒷면의 금속 슬롯 덮개를 제거합니다.
4. SSD를 삽입하세요: Carefully align the SSD's PCIe connector with the slot. Apply even, firm pressure to insert the card until it is fully seated in the slot. Secure the card with the retention clip or screw provided by your computer case.
5. 케이스를 닫고 전원을 켜세요: Close the computer case, reconnect the power cord, and power on the system.

Image 1: The Intel P3700 Series SSD, a PCIe add-in card with a heatsink and the Intel logo. The card features a standard PCIe connector for installation into a server or workstation.

4.2. Driver Installation and System Recognition

Modern operating systems often include native NVMe drivers. Upon first boot after installation, the operating system should detect the new SSD. If the drive is not immediately recognized or if you experience performance issues, you may need to:

• BIOS/UEFI 설정을 확인하세요: Ensure that PCIe slots are enabled and configured correctly in your system's BIOS/UEFI.
• Install NVMe Drivers: Download and install the latest NVMe drivers from Intel's official support website or your operating system vendor.
• 초기화 및 포맷: Use your operating system's disk management tools to initialize the new SSD and create partitions before use.

5. 사용 설명서

The Intel P3700 Series SSD leverages Non-Volatile Memory Express (NVMe) technology, designed to maximize the performance of PCIe-based SSDs. Once installed and configured, the SSD operates as a high-speed storage device within your system.

주요 특징:

• High Endurance: Designed for demanding data center workloads with high read/write cycles.
• Power Loss Imminent (PLI) Technology: Protects data in transit during unexpected power loss events.
• AES 256-bit Hardware Encryption: Provides robust data security.
• End-to-End Data Protection: Ensures data integrity from the host to the NAND flash.
• Temperature Monitoring and Logging: Internal sensors monitor operating temperature for optimal performance and longevity.

For optimal performance, ensure your operating system and applications are configured to utilize high-speed storage effectively. Regular system updates are recommended to maintain compatibility and performance.

6. 유지관리

Solid State Drives generally require minimal user maintenance compared to traditional hard disk drives. However, the following practices are recommended:

• 펌웨어 업데이트: Periodically check Intel's official support website for firmware updates for your SSD. Firmware updates can improve performance, stability, and add new features.
• 드라이브 상태 모니터링: Utilize SMART (Self-Monitoring, Analysis and Reporting Technology) tools or Intel's SSD Toolbox software (if available) to monitor the health and lifespan of your SSD.
• 운영 체제 최적화: Ensure your operating system's TRIM command is enabled for SSDs to maintain performance over time. Avoid defragmenting SSDs, as this is unnecessary and can reduce their lifespan.

7. 문제 해결

If you encounter issues with your Intel P3700 Series SSD, consider the following troubleshooting steps:

If problems persist, refer to Intel's official support resources or contact technical support.

8. 사양

Below are the technical specifications for the Intel P3700 Series SSD model SSDPEDMD800G401:

Note: The Intel P3700 Series SSD is primarily a PCIe NVMe device. While 'SATA' was listed in some general specifications, the core interface for this model is PCIe. The '1.3 Inches' form factor typically refers to a 2.5-inch U.2 drive, but the provided image and common configurations for this model indicate a PCIe Add-in Card (AIC).

9. 보증 및 지원

Intel provides a limited warranty for its SSD products. For detailed warranty terms and conditions, please refer to the documentation included with your product or visit the official Intel website. For technical assistance, driver downloads, firmware updates, and additional support resources, please visit:

인텔 공식 지원 Web대지

When contacting support, please have your SSD model number (SSDPEDMD800G401) and serial number readily available.