Wheelock WHST-H15 호출 경적 사용 설명서

1. 서론

This instruction manual provides essential information for the proper installation, operation, and maintenance of the Wheelock WHST-H15 Paging Horn. Please read this manual thoroughly before attempting to install or operate the device to ensure safe and efficient performance. Retain this manual for future reference.

2. 안전 정보

경고:

• 설치 및 배선 작업은 모든 지역 및 국가 전기 규정에 따라 자격을 갖춘 인원이 수행해야 합니다.
• 감전을 방지하기 위해 장치를 설치하거나 수리하기 전에 전원을 차단하십시오.
• Ensure the mounting surface can adequately support the weight of the paging horn.
• 기기를 과도한 습기나 지정된 작동 범위를 벗어난 극한 온도에 노출시키지 마십시오.
• 지정된 볼륨만 사용tage inputs (25V, 70V, 100V) to avoid damage to the unit.

3. 패키지 내용

포장을 풀 때 모든 구성 요소가 들어 있고 손상되지 않았는지 확인하세요.

• Wheelock WHST-H15 Paging Horn (1 unit)
• Adjustable Mounting Bracket (pre-attached or separate)
• Installation Hardware (screws, washers, nuts - quantity may vary)
• 이 사용 설명서

4. 설정 및 설치

The Wheelock WHST-H15 Paging Horn is designed for versatile installation with its adjustable, weatherproof mounting. It supports 25V, 70V, and 100V audio systems.

Figure 1: Wheelock WHST-H15 Paging Horn. This image displays the Wheelock WHST-H15 Paging Horn, featuring its conical speaker and an adjustable mounting bracket at the base. The horn is designed for clear audio projection in various environments.

4.1 Mounting the Paging Horn

1. 위치 선택: Choose a suitable mounting location that provides optimal sound coverage and is structurally sound. Consider the weatherproof design for outdoor applications.
2. 안전한 브라켓: If the mounting bracket is separate, attach it securely to the chosen surface using appropriate hardware. Ensure it is level and stable.
3. Attach Horn: Mount the paging horn to the bracket. Use the adjustable mechanism to orient the horn for desired sound direction. Tighten all fasteners to prevent movement.

4.2 배선 연결

The WHST-H15 supports 25V, 70V, and 100V constant voltage audio systems. It also features a 15W power rating.

1. 전원 선택: 볼륨 찾기tage selector switch or terminals on the horn. Set it to match your audio system's output voltage (25V, 70V, or 100V). Incorrect voltag선택하면 장치가 손상될 수 있습니다.
2. Connect Audio Lines: Connect the audio input lines from your amplifier or paging system to the designated terminals on the horn. Observe correct polarity (+/-).
3. 보안 연결: Ensure all wiring connections are tight and properly insulated to prevent short circuits and ensure reliable operation.

5. 사용 설명서

Once installed and wired correctly, the Wheelock WHST-H15 Paging Horn operates in conjunction with your connected audio system.

1. 전원 켜기: Apply power to your audio amplifier or paging system.
2. 테스트 오디오: Initiate a test page or audio signal through your system.
3. Adjust Volume/Direction: If necessary, adjust the output volume from your amplifier. The horn's direction can be fine-tuned using its adjustable mounting bracket.

Note: The WHST-H15 is a passive device and does not have its own volume control. Volume adjustments are made at the audio source.

6. 유지관리

The Wheelock WHST-H15 Paging Horn requires minimal maintenance to ensure long-term performance.

• 정기 검사: Periodically inspect the horn and its mounting bracket for any signs of damage, corrosion, or loose connections.
• 청소: Clean the exterior of the horn with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no moisture enters the internal components.
• 환경 보호: While weatherproof, extreme environmental conditions may necessitate more frequent checks.

7. 문제 해결

If you encounter issues with your Wheelock WHST-H15 Paging Horn, refer to the following common problems and solutions:

8. 사양

9. 보증 및 지원

For warranty information and technical support, please refer to the official Wheelock web사이트에서 확인하거나 고객 서비스에 직접 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.

Wheelock Customer Support: Visit Eaton's Wheelock Web대지