1. 제품 오버view
The GM Lighting LumenTask X8-120-WH is an 8-inch, 120V Xenon undercabinet fixture designed to provide high-intensity, low-maintenance lighting. It features a sleek white finish and a tempered frosted prismatic glass lens for optimal light distribution. The fixture includes an anodized aluminum reflector for maximum illumination and a Hi-Low-Off switch for adjustable lighting levels. Its unique 'Open Wide' hinged system allows for hands-free re-lamping and maintenance.
주요 특징:
- 8 inches long x 4.75 inches wide x 1.375 inches high.
- Includes one (1) 35W G9 base 120V Xenon lamp.
- White finish with tempered frosted, prismatic glass lens.
- Hi-Low-Off switch for full or 50% lighting level.
- UL rated for dry, indoor locations.
- Anodized aluminum reflector for maximum light distribution.
- 'Open Wide' hinged system for easy access and maintenance.
2. 안전 정보
Please read and understand all instructions before installing or operating this fixture. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- 경고: 감전 위험이 있습니다. 설치 또는 정비 전에 퓨즈나 회로 차단기의 전원을 분리하세요.
- 이 고정장치는 다음을 위해 설계되었습니다. 실내에서만 사용 가능 in dry locations. Do not expose to water or moisture.
- 중요한: This fixture requires hardwiring directly to available wiring. An optional CP-6 (72-inch cord and plug) is available for separate purchase if hardwiring is not feasible.
- 통풍: The fixture must be installed a minimum of 2 inches from the back of the cabinet to allow for proper ventilation and prevent overheating.
- Ensure all electrical connections are made in accordance with local codes and ordinances. If you are unsure about wiring, consult a qualified electrician.
- Do not operate the fixture with a damaged cord or if the housing is compromised.
3. 패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- 1 x LumenTask X8-120-WH Undercabinet Fixture
- 1 x 35W G9 Base 120V Xenon Lamp
- 지침서
4. 설정 및 설치
Before installation, ensure power is disconnected at the circuit breaker. This fixture is designed for hardwired installation.
4.1 Fixture Dimensions and Features
이미지 1: This diagram illustrates the overall dimensions of the 8-inch LumenTask fixture, including its length (8 inches), width (4-3/4 inches), and height (1-3/8 inches). It also highlights key features such as the Hi-Low-Off switch, the frosted prismatic glass lens, and the Xenon lamp with an anodized aluminum reflector. A table provides dimensions for other LumenTask models (X8, X16, X24, X32, X40).
4.2 상세 구성 요소 View
이미지 2: 이 자세한 view shows the internal and external components of the LumenTask fixture. It points out the ceramic lamp socket, 'Open Wide' wiring compartment, anodized aluminum mirrored reflector, tempered frosted prismatic glass lens, Hi-Low-Off switch, die-cast end caps, multiple vents for cooling, and mounting holes with pre-set screws. It also describes the one-piece, low-profile CRS housing with die-cast ends for stability.
4.3 Accessing the Interior for Wiring
The LumenTask fixture features an 'Open Wide' design for easy access to the wiring compartment without dismounting the fixture. This allows for hands-free wiring and maintenance.
- To open, simply depress the wire compartment holding tab.
- The wiring compartment cover will swing down and out, staying in position.
- Make necessary electrical connections.
- Once wiring is complete, snap the cover back into its closed position.
- Slide the lens back into place.
이미지 3: This series of images demonstrates the process of accessing the interior of the LumenTask fixture. It shows how to depress the tab to open the wiring compartment, revealing the internal wiring, and how to slide the lens back into position after maintenance or wiring.
4.4 장착
- Identify the mounting holes with pre-set screws on the fixture.
- Position the fixture under the cabinet, ensuring the 2-inch ventilation clearance from the back of the cabinet.
- Secure the fixture using appropriate screws (not included) through the mounting holes.
- Wire mold knock-outs on the end caps are provided for through-wiring multiple units using Lumen Task EZ Connectors (sold separately).
5. 사용 설명서
Once installed and powered, the LumenTask fixture is ready for operation.
- 전원 켜기/끄기: Use the integrated Hi-Low-Off rocker switch located on the fixture to turn the light on or off.
- 밝기 조정: The Hi-Low-Off switch also allows you to select between full brightness ('Hi') and 50% brightness ('Low').
- 디밍 : The fixture can be dimmed remotely by a standard incandescent dimmer (sold separately) if connected to a dimmable circuit.
6. 유지관리
Regular maintenance ensures optimal performance and longevity of your LumenTask fixture.
6.1리터amp 대사
The Xenon lamp has a rated average life of 5,000 hours. When replacement is needed:
- 전원 분리: Always turn off power to the fixture at the circuit breaker before replacing the lamp.
- 내부 접근: Use the 'Open Wide' hinged system to access the lamp compartment (refer to Section 4.3).
- 이전 L 제거amp: Carefully remove the old 35W G9 base Xenon lamp from its ceramic socket. Allow the lamp to cool if it has been recently in use.
- 새로운 L 설치amp: Insert a new 35W G9 base 120V Xenon lamp into the socket. Avoid touching the new lamp with bare hands; use a cloth or glove to prevent oil residue.
- 접전 경기: Close the wiring compartment cover and slide the lens back into place.
- 복원력 : 회로 차단기에서 전원을 복구하세요.
6.2 청소
- Ensure the fixture is off and cool before cleaning.
- 부드럽고 마른 천으로 외부 표면을 닦으세요.
- 완고한 자국에는 약간 d를 사용하세요.amp 순한 비누를 묻힌 천으로 닦은 후 마른 천으로 물기를 제거하십시오.
- Do not use abrasive cleaners or solvents, as these can damage the finish or lens.
7. 문제 해결
If you encounter issues with your LumenTask fixture, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 조명이 켜지지 않습니다. | 고정 장치에 전원이 공급되지 않습니다. | 차단기와 벽 스위치를 점검하십시오. 모든 배선 연결이 단단히 고정되어 있는지 확인하십시오. |
| 불빛이 깜빡이거나 어둡습니다. | 느슨한 lamp or faulty lamp. | l을 확인하세요amp is securely seated. Replace the lamp if it is old or appears faulty. |
| Fixture gets too hot. | 환기가 불충분합니다. | Verify that there is at least 2 inches of clearance from the back of the cabinet for proper airflow. |
| 밝기 조절 기능이 작동하지 않습니다. | Incompatible dimmer or incorrect wiring. | Ensure an incandescent dimmer is used. Check dimmer wiring. |
If troubleshooting steps do not resolve the issue, contact GM Lighting customer support.
8. 사양
| 사양 | 세부 사항 |
|---|---|
| 모델 번호 | X8-120-WH |
| 치수(길이 x 너비 x 높이) | 8 x 4.75 x 1.38 인치 |
| 품목 무게 | 1.15파운드 |
| 권tage | 120 볼트 |
| 왓tage | 35 와트 |
| 광원 유형 | Xenon (G9 base) |
| 광원의 수 | 1 |
| 색온도 | 2900 켈빈 |
| 마무리 유형 | 하얀색 |
| 그늘 소재 | 알루미늄, 유리 |
| 스위치 유형 | Hi-Low-Off Rocker Switch |
| 제어 방법 | Remote (via dimmer) |
| 실내/실외 사용 | 실내에서만 사용 가능 |
| 장착 유형 | 언더 캐비닛 |
| 특징 | Requires 2-inch minimum clearance for ventilation. Hardwired installation. |
9. 보증 및 지원
GM Lighting is committed to quality and customer satisfaction. While specific warranty details are not provided in this document, GM Lighting products are designed with durability in mind.
For technical assistance, layout guidance, or installation support, please contact GM Lighting's technical staff. Refer to the product packaging or GM Lighting's official web최신 연락처 정보는 사이트에서 확인하세요.
