1. 제품 오버view
The HENDI 271346 Roasting Thermometer/Timer is a versatile kitchen tool designed to accurately monitor temperatures during cooking, especially for roasting. It features a durable stainless steel probe suitable for oven use and includes a timer function for precise cooking control.
Image: The HENDI 271346 digital thermometer and timer unit with its attached stainless steel probe, ready for use.
주요 특징:
- 타이머 기능: Allows for precise timing of cooking processes.
- 광범위한 온도 범위: 측정 범위는 0°C에서 300°C(32°F에서 572°F)까지입니다.
- 선택 가능한 단위: 섭씨(°C)와 화씨(°F)를 쉽게 전환할 수 있습니다.
- Accurate Graduation: Provides readings with 1°C (or 0.1°C resolution as per specifications) precision.
- 잠금 모드 : For continuous temperature monitoring.
- Min/Max Temperature Function: Records the lowest and highest temperatures measured.
- Programmable Temperature Alarm: Alerts you when the target temperature is reached.
- 내구성 있는 프로브: 150 mm stainless steel probe designed to remain in the oven (heat resistant).
- 배터리 작동: Convenient and portable, battery included.
2. 안전 정보
Please read all safety instructions carefully before using the device. Improper use can lead to damage or injury.
- 프로브 처리: The stainless steel probe is sharp. Handle with care to avoid injury.
- 메인 유닛: The main thermometer unit is NOT waterproof. Do not immerse it in water or other liquids. Clean with a damp 천만.
- Probe Heat Resistance: The probe and its cable are designed to withstand high oven temperatures (up to 250°C). However, avoid direct flame contact.
- 어린이들: 기기를 어린이의 손이 닿지 않는 곳에 보관하세요.
- 배터리 안전: 배터리의 극성을 확인하십시오. 장기간 사용하지 않을 경우 배터리를 제거하십시오. 배터리는 책임감 있게 폐기하십시오.
- 용도: This device is intended for food temperature measurement only. Do not use for other purposes.
3. 패키지 내용
패키지를 열 때 다음 품목이 모두 들어 있는지 확인하세요.
- HENDI 271346 Thermometer/Timer Unit
- 150 mm Stainless Steel Temperature Probe
- 배터리 (사전 설치됨 또는 별도 구매)
Image: All components of the HENDI 271346 thermometer, including the main unit, probe, and a probe clip/holder.
4. 설정
- 배터리 설치:
Locate the battery compartment on the back of the main unit. Open the cover, insert the included battery (typically AAA) ensuring correct polarity (+/-), and close the compartment securely.
- 프로브 연결:
프로브의 잭을 본체 측면의 지정된 포트에 단단히 삽입하십시오. 정확한 측정을 위해 연결이 제대로 되었는지 확인하십시오.
- 초기 전원 켜기:
Press the power button (if available, otherwise it may power on automatically upon probe connection or battery insertion). The display should light up, showing the current ambient temperature.
5. 사용 설명서
5.1. 온도 측정
- 프로브 배치: Insert the stainless steel probe into the thickest part of the food, avoiding bones or gristle, for the most accurate temperature reading.
- 온도 모니터링: The current temperature will be displayed on the main unit's screen.
- Using in Oven: The probe and its cable are oven-safe. Ensure the main unit remains outside the oven, away from direct heat.
Image: The HENDI 271346 thermometer in use, with the probe inserted into a piece of meat to monitor its internal temperature.
5.2. Setting Temperature Units (°C/°F)
Press the "°C/°F S/S" button to toggle between Celsius and Fahrenheit temperature displays.
5.3. Setting a Target Temperature (Alarm)
- Press the "SET TEMP" button (or similar, based on common thermometer interfaces, assuming it's the same as the °C/°F button or a dedicated one if present).
- Use the "MIN" and "SEC" buttons (or up/down arrows if present) to adjust the desired target temperature.
- Once the target temperature is set, the alarm will sound when the probe reaches this temperature.
5.4. 타이머 기능 사용
The device also functions as a timer.
- Press the "MODE" button (if available, or a long press on "S/S" might switch modes) to enter timer mode.
- Use the "MIN" and "SEC" buttons to set the desired countdown time.
- Press the "S/S" button to start or stop the timer. An alarm will sound when the timer reaches zero.
5.5. Min/Max Temperature Function
이 기능을 사용하면 view the minimum and maximum temperatures recorded since the device was powered on or reset.
- Press a dedicated "MIN/MAX" button (if available) or cycle through modes to view 이 값.
- To reset the min/max values, consult the device's specific button combination (often a long press on the min/max button or power cycle).
5.6. 잠금 모드
The lock mode is designed to monitor temperature continuously without accidental changes to settings.
- Activate lock mode by pressing the designated "LOCK" button (if available) or a specific button combination.
- In lock mode, the display will continue to show the current temperature, but buttons will be unresponsive until unlocked.
6. 유지관리
Proper maintenance ensures the longevity and accuracy of your HENDI thermometer.
- 프로브 청소: After each use, clean the stainless steel probe thoroughly with warm soapy water. Rinse and dry completely. The probe can be wiped with a damp 옷감.
- 본체 청소: 부드러운 천으로 본체를 닦으세요.amp cloth. Do NOT immerse the main unit in water or place it under running water. Avoid abrasive cleaners or solvents.
- 저장: Store the thermometer and probe in a clean, dry place when not in use. Keep the probe tip protected to prevent damage.
- 배터리 교체: When the display dims or the device stops functioning, replace the battery. Follow the battery installation steps in Section 4.1.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 디스플레이가 비어 있거나 어둡습니다. | 배터리 잔량이 부족하거나 방전되었습니다. 배터리가 잘못 설치되었습니다. | Replace the battery. Ensure battery is inserted with correct polarity. |
| Inaccurate temperature readings (e.g., showing +50°C initially). | Probe not fully inserted. Probe or cable damage. Environmental interference. | Ensure the probe jack is fully seated. Check probe and cable for visible damage. Try testing in a known temperature environment (e.g., ice water for 0°C). If the issue persists, the probe or unit may be faulty. |
| 알람이 울리지 않습니다. | Alarm volume too low or muted. Target temperature not set correctly. | Check if there's a volume setting (unlikely for this type of device, but check manual if available). Re-set the target temperature. |
| 버튼이 반응하지 않습니다. | Device is in Lock Mode. Battery issue. | Deactivate Lock Mode. Replace battery. |
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 271346 |
| 상표 | 헨디 |
| 온도 범위 | 0°C ~ 300°C(32°F ~ 572°F) |
| 온도 분해능 | 0.1도 |
| 프로브 길이 | 150mm (XNUMXmm) |
| 프로브 재질 | 스테인리스 스틸 |
| Main Unit Material | 스테인리스 스틸(외부) |
| 치수(길이 x 너비 x 높이) | 2.6 x 11.9 x 23.1 cm (approx. 65x70x17 mm for the unit itself) |
| 무게 | 118그램 |
| 전원 | Battery Powered (Battery included) |
| Heat Resistance (Probe) | Up to 250°C (Oven-safe) |
| 원산지 | 중국 |
9. 보증 및 지원
For warranty information, please refer to the documentation included with your purchase or visit the official HENDI website. HENDI provides high-quality products and exceptional service.
If you encounter any issues not covered in this manual or require further assistance, please contact HENDI customer support through their official channels. Always provide your product model number (271346) when seeking support.
You can find more information about HENDI products and support at: www.hendi.eu
