1. 제품 오버view
The Lincoln Electric SHIELDARC 70 Plus EO electrodes are designed for shielded metal arc welding (SMAW) of carbon steel. These 5/32 inch diameter, 14 inch long electrodes are supplied in a 50 lb. sealed can, ensuring optimal condition for use. They are suitable for various welding applications requiring good mechanical properties and ease of use.
Figure 1: A sealed 50 lb. can of Lincoln Electric SHIELDARC 70 Plus EO stick welding electrodes, indicating proper packaging for storage and protection.
2. 안전 정보
Welding operations present various hazards. It is imperative to follow all safety precautions to prevent injury or property damage. Always refer to ANSI Z49.1 "Safety in Welding, Cutting, and Allied Processes" and your employer's safety practices.
- 연기 및 가스: Keep your head out of the fumes. Use enough ventilation, exhaust at the arc, or both, to keep fumes and gases from your breathing zone and the general area.
- 전기 충격: Can kill. Do not touch live electrical parts. Wear dry insulating gloves and clothing. Insulate yourself from work and ground.
- 아크 광선: Can burn eyes and skin. Wear a welding helmet with a proper shade of filter lens to protect your eyes and face. Wear appropriate protective clothing to protect your skin.
- 화재 및 폭발: Welding sparks and hot materials can cause fire or explosion. Keep flammables away from the welding area. Have a fire extinguisher readily available.
- 핫 부품: Can cause severe burns. Allow welded materials to cool before handling.
3. 보관 및 취급
Proper storage is crucial to maintain the quality and performance of welding electrodes. These electrodes are supplied in a sealed can to protect them from moisture absorption.
- Store electrodes in their original sealed container in a dry environment.
- Once opened, store electrodes in a heated cabinet or oven at recommended temperatures (typically 250-300°F / 120-150°C) to prevent moisture pickup, especially in humid conditions.
- Avoid exposing electrodes to extreme temperature fluctuations or direct sunlight.
- Handle cans carefully to prevent damage that could compromise the seal.
4. 설정 및 준비
Before beginning any welding operation, ensure proper setup of your equipment and workspace.
- 작업 공간 준비: 용접 부위에서 인화성 물질을 모두 제거하십시오. 적절한 환기를 확보하십시오.
- 개인 보호 장비(PPE): Don appropriate PPE, including a welding helmet, flame-resistant clothing, welding gloves, and safety shoes.
- 용접기: Connect the welding machine according to the manufacturer's instructions. Ensure proper grounding.
- 전극 선택: Select the appropriate electrode holder and ensure a secure connection.
- Base Material Preparation: Clean the base metal thoroughly, removing rust, paint, oil, and other contaminants that could affect weld quality.
5. 사용 설명서
Follow these general guidelines for effective welding with SHIELDARC 70 Plus EO electrodes:
- 현재 설정: Refer to the electrode manufacturer's recommendations for amperage settings. Start with the lower end of the range and adjust as needed.
- 호의 길이: Maintain a short arc length, typically equal to the electrode's core wire diameter, for optimal penetration and bead shape.
- 여행 속도 : Maintain a consistent travel speed to ensure proper bead width and penetration. Too fast can lead to narrow, convex beads; too slow can cause excessive buildup and overheating.
- 전극 각도: Hold the electrode at a slight angle (10-15 degrees) in the direction of travel for most applications.
- 호를 그리며: Use a scratching or tapping motion to strike the arc. Once the arc is established, lift the electrode slightly to maintain the desired arc length.
- 슬래그 제거: After each pass, allow the weld to cool slightly, then chip away the slag. Ensure all slag is removed before making subsequent passes.
6. Electrode Maintenance
The primary maintenance for these electrodes involves preventing moisture absorption. Once the can is opened, electrodes should be stored in a heated electrode oven to maintain their low hydrogen properties. Electrodes exposed to atmospheric moisture for extended periods may require re-baking according to manufacturer specifications to restore their performance characteristics.
7. 일반적인 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 다공성 (small holes in weld) | Moisture in electrode coating, contaminated base metal, insufficient shielding gas (if applicable), incorrect arc length. | Re-bake electrodes, clean base metal, ensure proper arc length. |
| Lack of Fusion | 불충분하다 amp이동 속도가 너무 빠르거나 전극 각도가 잘못되었을 수 있습니다. | 증가하다 amperage, decrease travel speed, adjust electrode angle. |
| 과도한 스패터 | 너무 높다 amperage, too long arc length, incorrect polarity. | 감소하다 amperage, shorten arc length, check polarity settings. |
| Arc Instability | Moisture in electrode, poor ground connection, incorrect current. | Re-bake electrodes, check ground clamp, adjust current. |
8. 제품 사양
- 모델 번호: ED012849
- 전극 유형: SHIELDARC 70 Plus EO
- 지름: 5/32 인치
- 길이: 14인치
- 무게: 50 lb. can
- 제조업체: 링컨 일렉트릭
- ASIN: B00IPUB4SY
- 첫 이용 가능 날짜: 14년 2012월 XNUMX일
9. 보증 정보
For specific warranty details regarding Lincoln Electric SHIELDARC 70 Plus EO electrodes, please refer to the official Lincoln Electric website or contact their customer support. Generally, welding consumables are warranted against defects in material and workmanship at the time of shipment.
10. 고객 지원
For technical assistance, product inquiries, or support, please contact Lincoln Electric directly:
- Web대지: www.lincolnelectric.com
- 연락처 정보: Refer to the "Contact Us" section on their official web해당 지역의 전화번호와 이메일 주소를 찾을 수 있는 사이트입니다.
11. 법적 고지사항
식이 보충제에 대한 진술은 FDA에서 평가하지 않았으며, 어떠한 질병이나 건강 상태를 진단, 치료, 치유 또는 예방하기 위한 것이 아닙니다.
Note: This disclaimer appears to be a generic placeholder from the source data and may not be directly relevant to welding electrodes. Users should always consult product-specific safety data sheets (SDS) and manufacturer guidelines for accurate and relevant safety information.