1. 서론
This manual provides essential information for the safe and efficient use of the Omron Z-15GW2-B7-K Industrial Snap Switch. Please read these instructions thoroughly before installation, operation, or maintenance to ensure proper function and prevent potential hazards.
2. 안전 정보
경고: 감전 및 부상의 위험이 있습니다.
- Always disconnect power before installing, wiring, or servicing the switch.
- 설치 및 배선 작업은 모든 지역 및 국가 전기 규정에 따라 자격을 갖춘 인원이 수행해야 합니다.
- 지정된 전류 및 볼륨을 초과하지 마십시오.tag전자 등급.
- 감전을 방지하기 위해 올바르게 접지하십시오.
- Avoid exposing the switch to environments outside its specified operating temperature and IP rating.
3. 제품 오버view
The Omron Z-15GW2-B7-K is an industrial snap switch designed for reliable operation in various control applications. It features a Single Pole Double Throw (SPDT) contact form and a hinge roller lever actuator, providing precise detection of mechanical movement.
그림 1: Omron Z-15GW2-B7-K Industrial Snap Switch. This image shows the Omron Z-15GW2-B7-K Industrial Snap Switch, featuring a hinge roller lever actuator and screw terminals. The compact design is suitable for various industrial applications.
주요 특징:
- 액추에이터 유형 : Hinge Roller Lever
- 문의 양식: SPDT(단극 쌍투)
- 현재 평가: 15 Amps
- 권tage 등급: 480VAC
- 터미널 유형 : 나사
- 하우징 소재: 플라스틱
- 국제 보호 등급: IP65
4. 설정 및 설치
Follow these steps for proper installation of the Omron Z-15GW2-B7-K snap switch:
- 전원 차단: Ensure all power to the circuit is disconnected before beginning installation. Verify with a voltag전자 테스터.
- 설치: The switch is designed for snap-in mounting. Secure the switch using the mounting dimensions of 1.03 inches centers. Ensure the mounting surface is stable and free from excessive vibration.
- 배선:
- Identify the screw terminals. The SPDT contact form typically includes Common (C), Normally Open (NO), and Normally Closed (NC) terminals. Refer to the wiring diagram on the switch body if available.
- Connect the appropriate wires to the screw terminals. Ensure connections are tight and secure to prevent loose contacts and overheating.
- Use wire gauges suitable for the 15A current rating.
- Actuator Alignment: Position the hinge roller lever actuator so that it can be reliably engaged by the target mechanism. Ensure the mechanism provides sufficient over travel (0.157 In.) and does not exceed the maximum pretravel (0.157 In.) for consistent operation.
- 환경 고려 사항: Install the switch in an environment within its specified operating temperature range (-25°C to 80°C) and where its IP65 rating is sufficient for protection against dust and water ingress.
- 테스트: After installation, carefully restore power and test the switch's operation to confirm correct functionality and wiring.
5. 사용 설명서
The Omron Z-15GW2-B7-K snap switch operates based on the physical displacement of its hinge roller lever actuator. When the actuator is depressed, the internal contacts switch state.
- 작동: The switch requires an operating force of approximately 3.5 oz. to actuate. The hinge roller lever is designed to be engaged by a moving part of machinery or equipment.
- Contact Function (SPDT):
- In its normal (unactuated) state, the Common (C) terminal is connected to the Normally Closed (NC) terminal.
- When the hinge roller lever is depressed, the Common (C) terminal switches connection to the Normally Open (NO) terminal.
- The switch maintains this state as long as the actuator is depressed. Upon release, the contacts return to their normal state.
- 작동 모드: The switch functions in an OFF-NONE-ON mode, meaning it has a stable OFF state, a transient ON state when actuated, and returns to OFF when released.
6. 유지관리
Regular maintenance helps ensure the longevity and reliable performance of your Omron snap switch.
- 점검: Periodically inspect the switch for any signs of physical damage, wear on the hinge roller lever, or loose wiring connections.
- 청소: Keep the switch free from dust, dirt, and debris. Use a soft, dry cloth for cleaning. Do not use harsh chemicals or abrasive materials.
- 액추에이터 점검: Verify that the mechanism actuating the hinge roller lever is operating smoothly and consistently, without excessive force or misalignment.
- 환경 보호: Ensure that the environmental conditions remain within the specified IP65 rating. If the housing is damaged, the protection level may be compromised.
- 전원 차단: 유지관리나 검사를 수행하기 전에는 항상 전원을 분리하세요.
7. 문제 해결
If you encounter issues with your Omron Z-15GW2-B7-K snap switch, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Switch does not actuate when lever is pressed. |
|
|
| No electrical contact change when switch actuates. |
|
|
| 스위치는 간헐적으로 작동합니다. |
|
|
If problems persist after attempting these solutions, contact Omron technical support or a qualified electrician.
8. 사양
Technical specifications for the Omron Z-15GW2-B7-K Industrial Snap Switch:
| 매개변수 | 값 |
|---|---|
| 모델 번호 | Z-15GW2-B7-K |
| 시리즈 | Z |
| 액추에이터 유형 | Hinge Roller Lever |
| 문의 양식 | SPDT(단극 쌍투) |
| 현재 평가 | 15 Amps |
| 권tage 등급 | 480VAC |
| 작동 모드 | 꺼짐-없음-켜짐 |
| 터미널 유형 | 나사 |
| 운영력 | 3.5온스 |
| Max. Pretravel | 0.157 인치 |
| Release Force | 0.79온스 |
| 차동 여행 | 0.040 인치 |
| 여행 | 0.157 인치 |
| 길이 | 1.94 In. (Product Dimensions: 2.5 inches) |
| 키 | 1.16 In. (Product Dimensions: 1.8 inches) |
| 깊이 | 0.69 In. (Product Dimensions: 0.6 inches) |
| 장착 치수 | 1.03 In. Centers |
| 작동 온도 범위 | -25°C ~ 80°C |
| 하우징 소재 | 플라스틱 |
| 접촉 재료 | 구리, 황동 |
| 국제 보호 등급 | IP65 |
| 품목 무게 | 0.01 온스 |
9. 보증 및 지원
For warranty information and technical support regarding your Omron Z-15GW2-B7-K Industrial Snap Switch, please refer to the official Omron web해당 웹사이트를 방문하시거나 공인 오므론 대리점에 문의하십시오. 보증 청구를 위해 구매 영수증을 보관하십시오.
오므론 Web대지: www.omron.com
For specific product inquiries or troubleshooting assistance not covered in this manual, Omron's customer service team is available to help.
