1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of your Moen T3292 Align Moentrol Volume Control Modern Shower Trim Kit. This trim kit is designed to work with the Moentrol valve system, which balances water pressure to maintain temperature stability. It is also compatible with the Moen M-PACT common valve system, allowing for future style updates without plumbing changes.
2. 중요한 안전 정보
- 설치 또는 유지 보수 작업을 시작하기 전에 항상 메인 급수 밸브를 잠그십시오.
- 설치 과정 중 확실하지 않은 부분이 있다면 자격을 갖춘 전문 배관공에게 문의하는 것이 좋습니다.
- 설치하는 동안 안전 안경 등 적절한 개인 보호 장비를 착용하세요.
- 모든 연결 부분이 안전하고 방수 처리되어 누수가 발생하지 않도록 하세요.
3. 패키지 내용
Your Moen T3292 Align Moentrol Volume Control Modern Shower Trim Kit includes the following components:
- 샤워 헤드
- 샤워 암
- Escutcheon (wall plate)
- 핸들 조립
Note: The Moentrol valve (#3510, 3520, or 3570) is required for installation and is sold separately. This trim kit cannot function without the correct valve.
Figure 1: Moentrol Valve (Sold Separately)
4. 설치 지침
This section outlines the general steps for installing the Moen T3292 Trim Kit. For detailed valve installation, refer to the specific Moentrol valve instruction manual (models #3510, 3520, or 3570).
4.1. 사전 설치
- Ensure the correct Moentrol valve is already installed in the wall according to its specific instructions.
- Verify that the valve rough-in depth is appropriate for the trim kit. Improper depth can cause the handle to protrude excessively.
- Shut off the main water supply to the shower area.
4.2. 트림 키트 설치
- 샤워기 암 설치: Apply plumber's tape to the threaded end of the shower arm. Thread the shower arm into the wall fitting until hand-tight, then tighten with a wrench, ensuring the arm is positioned correctly.
- Install Showerhead: Thread the showerhead onto the shower arm. Hand-tighten, then use a wrench to secure, being careful not to overtighten.
- 에스커천 설치: Place the escutcheon (wall plate) over the valve body, aligning it with the mounting holes. Secure it with the provided screws.
- Install Handle Assembly: Follow the specific instructions provided with your Moentrol valve for installing the handle. This typically involves attaching the handle to the valve stem and securing it with a set screw.
Figure 2: Moen T3292 Trim Kit Components
그림 3: 예ample of an Installed Moen Shower System
5. 사용 설명서
The Moen T3292 Align Moentrol Shower Trim Kit provides precise control over water volume and temperature.
5.1. 볼륨 조절
The handle controls the water flow. Rotate the handle to increase or decrease the water volume from a gentle stream to full force. This allows for water conservation when full flow is not required.
5.2. 온도 조절
The Moentrol valve features pressure balancing technology, which helps maintain your desired water temperature even when other water sources in the house are in use. To adjust the temperature, rotate the handle to the desired position. The valve includes an integrated temperature limit stop for safety, which can be adjusted during valve installation to prevent scalding.
Figure 4: Moentrol Valve Usage and Benefits
6. 유지관리 및 관리
To maintain the chrome finish and ensure optimal performance of your Moen shower trim kit, follow these care guidelines:
- Clean regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome finishes.
- 연마성 세제, 독한 화학 약품 또는 수세미는 마감재를 손상시킬 수 있으므로 사용하지 마십시오.
- Rinse thoroughly with clean water after cleaning and wipe dry to prevent water spots.
- Periodically check the showerhead for mineral buildup. If necessary, clean the nozzles by gently rubbing them or soaking the showerhead in a vinegar solution.
7. 문제 해결
If you encounter issues with your Moen T3292 shower trim kit, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Handle does not sit flush with the wall plate. | Incorrect Moentrol valve rough-in depth. | Verify the valve rough-in depth against the Moentrol valve installation manual. An extension sleeve (sold separately) may be required for proper fit. |
| Water temperature is too hot or too cold, or difficult to adjust. | Temperature limit stop incorrectly set or valve cartridge orientation issue. | Refer to your Moentrol valve installation manual for instructions on adjusting the temperature limit stop or verifying cartridge orientation. |
| Low water pressure from the showerhead. | Mineral buildup in showerhead nozzles or partially closed water supply valves. | Clean showerhead nozzles. Ensure all water supply valves are fully open. |
| Leaks from the handle or escutcheon. | Loose connections or damaged O-rings/gaskets within the valve. | Ensure all trim kit components are securely tightened. If leaks persist, the valve cartridge or seals may need inspection or replacement. Consult a professional. |
8. 제품 사양
| 특징 | 사양 |
|---|---|
| 상표 | 모엔 |
| 모델 번호 | T3292 |
| 색상 | 크롬 |
| 마무리 유형 | 크롬 |
| 핸들 수 | 1 |
| 손잡이 재질 | 놋쇠 |
| 장착 유형 | 벽걸이형 |
| 포함된 구성 요소 | Faucet Trim Kit (Valve Sold Separately) |
| 머리 크기 | 7인치 |
| 제품 치수 | 7.4 x 7 x 7 인치 |
| 품목 무게 | 0.64 온스 |
| 유량 | 분당 2.5 갤런 |
| 물 소비량 | 분당 2.5갤런 |
| 인증 | ADA 준수 |
9. 보증 정보
The Moen T3292 Align Moentrol Volume Control Modern Shower Trim Kit is backed by Moen's Limited Lifetime Warranty. This warranty covers defects in material and manufacturing workmanship for the original consumer purchaser. For specific details regarding warranty coverage, terms, and conditions, please refer to the official Moen warranty documentation or visit the Moen web대지.
10. 고객 지원
For further assistance, technical support, or to inquire about replacement parts, please contact Moen Customer Service or visit the official Moen website. You can find contact information and support resources at www.moen.com.
