1. 서론
구매해주셔서 감사합니다asing the Hotone Nano Legacy Purple Wind 5-Watt Compact Guitar Amp Head. This ultra-compact amplifier head is designed to deliver premium guitar tones, inspired by the legendary Marshall Plexi Super Lead 1959, in a portable format. This manual provides essential information for safe and effective use of your amp리퍼.
2. 안전 정보
- 전원: Use only the specified power adapter (18V DC, center negative).
- 통풍: 과열을 방지하기 위해 적절한 환기를 유지하세요. 환기구를 막지 마세요.
- 수분: 본 제품을 비, 습기 또는 과도한 습도에 노출시키지 마십시오.
- 손질: Handle with care. Avoid dropping or subjecting the unit to strong impacts.
- 서비스: 본 제품의 수리를 직접 시도하지 마십시오. 모든 수리는 자격을 갖춘 전문가에게 맡기십시오.
- 스피커 연결: 항상 연결 amplifier to a speaker cabinet with the correct impedance (4-16Ω) before powering on to prevent damage.
3. 제품 오버view
The Hotone Nano Legacy Purple Wind is a compact 5-watt guitar amplifier head featuring a 3-band EQ and an FX loop. Its design is inspired by classic British rock tones.
전면 패널 컨트롤
- 입력: 1/4" mono jack to plug in your guitar.
- 베이스: Controls the low frequency response.
- 가운데: Controls the mid frequency response.
- 고음부: Controls the high frequency response.
- 이득: Controls the gain level.
- 음량: 출력 볼륨을 제어합니다.
- 온 / 오프 스위치: 장치의 전원을 켜거나 끕니다.
후면 패널 연결
- 18V DC: Plug in DC 18V adapter (center negative).
- 전화/회선 출력: 1/8" stereo jack, for using headphones or recording.
- AUX 입력 : 1/8" stereo jack, for connecting an external music player.
- FX 루프 반환: 1/4" mono jack, connect to your effects output jack.
- 스피커 출력: 1/4" mono jack, connect to your cabinet (speaker 4-16Ω).
- FX 루프 전송: 1/4" mono jack, connect to your effects input jack (The Effects Loop is a patch point between the pre-amp 그리고 힘 amp).
4. 설정
- 스피커 캐비닛 연결: Before powering on, connect a speaker cabinet (4-16Ω impedance) to the SPEAKER OUTPUT jack on the rear panel using a 1/4" mono speaker cable. Failure to connect a speaker cabinet before powering on can damage the amp리퍼.
- 전원 연결: Plug the included 18V DC power adapter into the 18V DC input on the rear panel, then plug the adapter into a suitable power outlet.
- 기타 커넥트: Plug your guitar into the INPUT jack on the front panel using a 1/4" mono instrument cable.
- 초기 설정: Turn the VOLUME and GAIN knobs to their minimum (counter-clockwise) positions before powering on.
- 전원 켜기: 전원 스위치를 'ON' 위치로 돌리십시오. 표시등이 켜집니다.
5. 사용 설명서
- 음색 조정: Use the BASS, MIDDLE, and TREBLE knobs to shape your desired tonal characteristics. Experiment with different settings to find your preferred sound.
- 이득 조정: The GAIN knob controls the amount of overdrive and distortion. Turn clockwise for more aggressive tones.
- 볼륨 조절: The VOLUME knob controls the overall output level of the amplifier. Adjust to your desired listening level.
- Using the FX Loop: Connect external effects pedals between the FX LOOP SEND and FX LOOP RETURN jacks to integrate them into your signal chain after the preamp 부분.
- Headphone/Line Out: For silent practice or direct recording, connect headphones or a line-level device to the PHONES/LINE OUTPUT. This output includes speaker cabinet simulation.
- AUX 입력 : Connect an external audio source (e.g., MP3 player, smartphone) to the AUX IN jack to play along with backing tracks.
6. 유지관리
- 청소: 부드럽고 건조한 천을 사용하여 청소하십시오. amp증폭기 외부에는 액체 세척제나 용제를 사용하지 마십시오.
- 저장: 저장하다 amp증폭기는 직사광선과 극한 온도 변화를 피해 건조하고 서늘한 곳에 보관하십시오.
- 튜브 관리: As a hybrid amp리파이어, 사전amp tube may eventually need replacement. If you notice a significant change in tone or performance, consult a qualified technician.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 소리가 나지 않습니다 | Power not connected, speaker not connected, volume/gain too low, faulty cable. | Check power connection, ensure speaker is connected, increase volume/gain, test with different cables. |
| 소리가 약하거나 왜곡됨 | Faulty cable, incorrect impedance, worn preamp 튜브. | Test cables, ensure correct speaker impedance, consult technician for tube replacement. |
| Excessive hum/noise | 접지 루프, 전원 공급 장치 결함, 다른 전자 장치의 간섭. | Try different power outlets, use a power conditioner, move away from other electronic devices. |
8. 사양
- 출력 와트tage: 5 와트
- 전원: 유선 전기 (18V DC, 중심 음극)
- 품목 무게: 15.5 온스
- 제품 크기: 2.34 x 5.03 x 2.95 인치
- 호환 장치: 기타
- 커넥터 유형: 6.35mm Jack (Input, Speaker Output, FX Loop Send/Return), 3.5mm Jack (Phones/Line Out, AUX IN)
- 스피커 임피던스: 4-16옴
- 모델 번호: TANLA2
9. 제품 비디오
OriPure 5W Tube Guitar Amp리파이어 헤드
비디오 설명: This video showcases the OriPure 5W Tube Guitar Amplifier Head, demonstrating its features and sound. It highlights the tube components and various controls, providing an overview of its performance capabilities.
The Joyo Jackman II Is Like A Tiny Marshall JCM 800.
비디오 설명: 이 영상은 자세한 내용을 제공합니다.view and demonstration of the Joyo Jackman II amplifier head, comparing its sound characteristics to a Marshall JCM 800. It covers clean and dirty tones, control adjustments, and overall performance.
OriPure 15W Tube Guitar Amplifier Head OA-H15
비디오 설명: This video demonstrates the OriPure 15W Tube Guitar Amplifier Head (Model OA-H15), showcasing its sound quality and features. It includes various guitar riffs and tone adjustments to illustrate its versatility.
조요 메테오 II 밴트amp XL 시리즈 미니 Amp Head 20 Watt
비디오 설명: This video presents the JOYO Meteor II BanTamp XL 시리즈 미니 Amp Head, a 20-watt hybrid tube amplifier. It demonstrates the amplifier's clean and overdrive channels, tone controls, and built-in Bluetooth functionality for playing backing tracks.
Valeton Guitar Amplifier Head TAR-20G Amp Pedal Platform Studio Desktop with CAB SIM
비디오 설명: This video showcases the Valeton Guitar Amplifier Head TAR-20G, highlighting its features as an amp pedal platform and desktop studio amplifier with built-in cab simulation. It demonstrates various tones and connectivity options.
JOYO 20W Amplifier Head BanTamP Series ATOMIC
비디오 설명: This video features the JOYO 20W Amplifier Head from the BanTamP Series, specifically the ATOMIC model. It demonstrates the amplifier's sound characteristics and features, designed for AC lovers.
10. 보증 및 지원
For warranty information and technical support, please refer to the official Hotone web웹사이트를 방문하거나 공인 대리점에 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.
