소개
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Gewiss 80003S GW20503 Bipolar Switch. Please read these instructions carefully before proceeding with installation or use. Keep this manual for future reference.
안전 정보
- 전기적 위험: 설치는 모든 지역 및 국가 전기 규정에 따라 자격을 갖춘 전기 기술자가 수행해야 합니다.
- 전원 차단: Always disconnect power at the main circuit breaker or fuse box before installing, servicing, or removing the switch.
- 권tag전자 및 현재: 스위치의 볼륨을 확인하세요tage and current ratings (16A) are compatible with your electrical system.
- 적절한 도구: 전기 작업에는 적절한 절연 도구를 사용하세요.
- 환경 조건: 젖어 있거나 d인 곳에는 설치하지 마십시오.amp 해당 제품이 그러한 환경에 적합하도록 특별히 설계되지 않은 한, 해당 장소에 설치해서는 안 됩니다.
제품 끝view
The Gewiss 80003S GW20503 is a modular 16A bipolar switch designed for integration into various electrical systems. Its modular design allows for flexible combinations with other devices and frames, meeting diverse design, functional, and installation requirements.
주요 특징:
- Modular installation range.
- 16A current rating.
- White finish.
- 고품질 구조.
그림 1: 앞쪽 view of the Gewiss 80003S GW20503 Bipolar Switch. This image shows the white switch module, typically installed within a wall plate or frame, featuring a rocker-style actuator for ON-OFF-ON operation.
설정 및 설치
Installation of the Gewiss 80003S GW20503 Bipolar Switch requires adherence to electrical safety standards. If you are not a qualified electrician, please consult one for installation.
설치 전 확인 사항:
- Verify that the power supply to the circuit is completely disconnected at the main breaker.
- Confirm that the switch ratings (16A, AC/DC) match your application requirements.
- Ensure you have all necessary tools: insulated screwdrivers, wire strippers, voltag전자 테스터.
배선 지침:
- With power off, carefully remove the existing switch or cover plate from the wall box.
- Identify the live (phase) and neutral wires from the power supply, and the corresponding wires leading to the load (e.g., light fixture). A bipolar switch interrupts both the live and neutral conductors.
- Connect the incoming live wire to one input terminal of the switch and the incoming neutral wire to the other input terminal.
- Connect the outgoing live wire to the corresponding output terminal and the outgoing neutral wire to its output terminal. Ensure all connections are secure and tight.
- For proper operation, ensure the switch is wired to interrupt both poles of the circuit.
설치:
- Carefully push the wired switch module into the wall box.
- 제공된 나사를 사용하여 스위치를 벽면 박스에 고정하십시오.
- Attach the decorative cover plate (if applicable) over the switch.
- Restore power at the main circuit breaker and test the switch functionality.
작동 지침
The Gewiss 80003S GW20503 Bipolar Switch operates with a simple rocker mechanism, providing ON-OFF-ON functionality.
- ON 위치: Press the top or designated 'ON' part of the rocker to close the circuit, allowing power to flow to the connected load.
- 꺼짐 위치: Press the bottom or designated 'OFF' part of the rocker to open the circuit, interrupting power to the connected load.
- The switch is designed for reliable and consistent operation.
유지
The Gewiss 80003S GW20503 Bipolar Switch requires minimal maintenance to ensure long-term performance.
- 청소: Periodically wipe the surface of the switch with a soft, dry cloth. For stubborn marks, a slightly damp cloth with mild soap can be used, ensuring no liquid enters the switch mechanism. Always disconnect power before cleaning.
- 점검: Annually inspect the switch for any signs of damage, loose connections, or discoloration. If any issues are observed, disconnect power and consult a qualified electrician for inspection and repair or replacement.
- 연마성 세척제나 용제는 플라스틱 소재를 손상시킬 수 있으므로 사용하지 마십시오.
문제 해결
If you encounter issues with your Gewiss 80003S GW20503 Bipolar Switch, refer to the following common problems and solutions. Always ensure power is disconnected before attempting any inspection or repair.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Switch does not operate (no power to load). |
|
|
| 스위치가 헐렁하거나 흔들거리는 느낌이 듭니다. |
|
|
| Switch is discolored or shows burn marks. |
|
|
경고: Do not attempt electrical repairs if you are not qualified. Always consult a professional electrician for complex issues or if you are unsure.
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 게비스 |
| 모델 번호 | 80003S |
| 제품 참조 | 80003S |
| 품목 치수(L x W x H) | 22 x 40 x 45mm |
| 무게 | 50그램 |
| 색상 | 하얀색 |
| 재료 | 플라스틱 |
| 파워 타입 | 교류/직류 |
| Items per Package | 1 |
| 스위치 유형 | Bipolar, 2-way |
| 장착 유형 | 벽걸이형 |
| 스위치 스타일 | 흔들리는 것 |
| 작동 모드 | 켜짐-꺼짐-켜짐 |
| 현재 평가 | 16아 |
| 커넥터 유형 | Two-pin |
| 터미널 유형 | 다리 |
| 인증 | IMQ Certified |
보증 및 지원
Gewiss products are manufactured to high-quality standards. While specific warranty details are not provided in this manual, standard manufacturer warranties typically cover defects in materials and workmanship for a defined period from the date of purchase.
기술 지원 또는 보증 청구 관련 문의:
- Please refer to the documentation included with your purchase for specific warranty terms and conditions.
- Contact your retailer or the official Gewiss customer support channels for assistance.
- When contacting support, please have your product model number (80003S GW20503) and proof of purchase readily available.
