소개
This manual provides instructions for the proper use and care of your Bespeco Silos Series Microphone Cable. This cable is designed for connecting microphones to audio equipment, ensuring reliable signal transmission.
제품 특징
- 차폐 설계: 6 mm shielded cable for interference reduction.
- Flexible Jacket: External jacket made of high-content vulcanized silicon for enhanced flexibility.
- 내구성 있는 커넥터: Hand-soldered connectors for reliability and longevity.
- 고품질 도체: OFC (Oxygen-Free Copper) cable for optimal signal clarity.
- 인체공학적 그립: Designed for ease of handling during connection and disconnection.
설정
The Bespeco Silos Series Microphone Cable features a female XLR connector on one end and a 1/4-inch (6.35mm) balanced jack on the other. Ensure your equipment has compatible ports before connecting.
- 커넥터 식별: Locate the female XLR input on your audio device (e.g., mixer, audio interface) and the 1/4-inch balanced output on your microphone or other audio source.
- Connect XLR: Gently insert the female XLR end of the cable into the male XLR output of your microphone. Ensure it clicks securely into place.
- Connect 1/4-inch Jack: Insert the 1/4-inch balanced jack end of the cable into the corresponding 1/4-inch input on your audio equipment. Push firmly until fully seated.
- 보안 연결: Verify that both connectors are fully inserted and secure to prevent signal loss or intermittent audio.
운영
Once the cable is properly connected, it facilitates the transmission of audio signals between your microphone and audio equipment. No specific operational steps are required for the cable itself beyond proper connection.
- 신호 흐름: The cable transmits balanced audio signals, which helps reduce noise over longer distances.
- 케이블 관리 : Avoid sharp bends or kinks in the cable during use to prevent internal damage.
- 단절: When disconnecting, grasp the connector housing firmly and pull straight out. Do not pull on the cable itself.
유지
Proper maintenance extends the life and performance of your microphone cable.
- 청소: 케이블과 커넥터를 부드럽고 마른 천으로 닦아 먼지와 이물질을 제거하십시오. 강한 화학 약품이나 연마성 재료는 사용하지 마십시오.
- 저장: Coil the cable loosely when not in use. Avoid tight coiling or wrapping around sharp objects, which can stress the internal wiring. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- 점검: Periodically inspect the cable for any signs of damage, such as cuts, fraying, or bent connector pins. If damage is observed, discontinue use to prevent potential equipment damage or poor audio quality.
문제 해결
If you experience issues with your audio setup, consider the following troubleshooting steps related to the cable:
- 소리 없음:
- Ensure both the XLR and 1/4-inch connectors are fully and securely seated in their respective ports.
- Verify that the microphone and audio equipment are powered on and configured correctly.
- Test with a different cable if available to rule out a cable fault.
- Intermittent Sound or Static:
- 케이블 양쪽 끝의 연결 부위가 헐거워지지 않았는지 확인하십시오.
- Inspect the cable for visible damage (cuts, kinks).
- 케이블이 전력 케이블이나 기타 전자기 간섭 발생원과 평행하게 설치되지 않도록 하십시오.
- Poor Audio Quality (Humming/Buzzing):
- Confirm that you are using a balanced input on your audio equipment for the 1/4-inch jack, as this cable is balanced.
- 모든 오디오 장비의 접지가 제대로 되어 있는지 확인하십시오.
- Keep the cable away from power transformers or fluorescent lights.
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | Bespeco |
| 모델 번호 | SLSF600 |
| 케이블 유형 | Microphone Cable (XLR Female to 1/4-inch Balanced Jack) |
| 길이 | 20피트(약 6.1미터) |
| 커넥터 1 | 여성 XLR |
| 커넥터 2 | 1/4-inch (6.35mm) Balanced Jack |
| 케이블 직경 | 6mm (XNUMXmm) |
| 도체 재료 | OFC(무산소구리) |
| 재킷 소재 | Vulcanized Silicon |
| 색상 | 블랙 & 오렌지 |
| 품목 무게 | 0.77파운드(약 349그램) |
| 제품 치수 | 9.33 x 2.6 x 4.6인치(포장) |
| 한국어: | 799804312142 |
보증 및 지원
For warranty information or technical support regarding your Bespeco Silos Series Microphone Cable, please refer to the official Bespeco web웹사이트를 방문하거나 공인 대리점에 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.
제조업체: Giannini Bespeco
