RICOO 전동 회전 TV 벽걸이 마운트 SE2544 사용 설명서

1. 서론

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your RICOO Electric Swivel TV Wall Mount, Model SE2544. This mount is designed to securely hold televisions with screen diagonals from 32 to 65 inches, weighing up to 45 kg, and compatible with VESA standards up to 400 x 400 mm.

설치하기 전에 이 설명서를 자세히 읽고 나중에 참고할 수 있도록 보관하세요.

2. 안전 정보

• 벽 구조가 마운트와 텔레비전의 총 무게를 견딜 수 있는지 확인하십시오. 확실하지 않은 경우 전문가와 상담하십시오.
• 최대 중량 용량 45kg(99파운드)을 초과하지 마십시오.
• Verify your TV's VESA mounting pattern is compatible with the mount (up to 400x400mm).
• Use appropriate tools and follow all installation steps carefully to prevent injury or damage.
• 어린이와 애완동물이 설치 장소에 접근하지 못하도록 하세요.
• Ensure all cables are properly routed and secured to prevent pinching or damage during movement.
• Only use the provided remote control for operating the electric swivel function.

3. 패키지 내용

Before beginning installation, please verify that all components are present and undamaged. If any parts are missing or damaged, contact RICOO customer support.

• Electric Swivel TV Wall Mount Assembly
• 원격 제어
• 전원 어댑터
• Mounting Hardware Kit (screws, anchors, washers for wall and TV attachment)
• 사용 설명서(본 문서)

Image 1: Main components of the RICOO Electric Swivel TV Wall Mount SE2544, including the motorized arm, TV bracket, power adapter, and remote control.

4. 설정 및 설치

Careful installation is crucial for the safety and functionality of your TV mount. It is recommended to have two people for installation.

4.1 설치 전 확인 사항

• 벽 유형: Ensure your wall can support the weight. For concrete or brick walls, use appropriate anchors. For wood stud walls, locate studs accurately.
• TV 호환성: Check your TV's VESA pattern (distance between mounting holes on the back of the TV) and weight. This mount supports VESA patterns up to 400x400mm and TVs up to 45 kg.
• 필요한 도구: 전동 드릴, 스터드 탐지기, 수평계, 드라이버, 줄자, 연필.

4.2 벽면 플레이트 장착

1. TV를 설치할 원하는 높이를 정하세요. 벽면 플레이트를 본떠서 벽에 드릴로 뚫을 위치를 표시하세요.
2. Drill pilot holes at the marked locations. Ensure the holes are level.
3. Attach the wall plate securely to the wall using the provided screws and anchors suitable for your wall type.

4.3 Attaching the TV Brackets to the Television

1. TV를 부드럽고 깨끗한 표면에 화면이 아래로 향하도록 조심스럽게 놓으십시오.
2. Attach the vertical TV brackets to the back of your television using the appropriate screws and spacers from the hardware kit. Ensure they are securely fastened.

Image 2: Illustration of attaching the TV to the wall mount, showing the TV brackets connected to the television and then hooked onto the main mount arm.

4.4 Hanging the TV on the Mount

1. With assistance, carefully lift the television and hook the attached TV brackets onto the horizontal arms of the wall mount.
2. 제공된 안전 나사 또는 잠금 장치를 사용하여 TV를 마운트에 고정하십시오.

4.5 Connecting Power and Cable Management

1. Connect the power adapter to the mount and plug it into a power outlet.
2. Route all TV and power cables neatly along the mount arms using the integrated cable management clips or ties. Ensure cables have enough slack for movement and are not pinched.

Image 3: Demonstrates the maximum weight capacity of 40kg (note: product description states 45kg, using the image's 40kg for consistency with visual) and highlights the integrated cable management feature on the mount arm.

5. 사용 설명서

The RICOO SE2544 mount features an electric swivel function controlled by the included remote.

5.1 리모콘 기능

• 위/아래 화살표: Adjust the vertical tilt of the TV (if applicable, typically +/- 1.5 degrees).
• 좌/우 화살표: Swivel the TV horizontally (up to 90 degrees in each direction).
• 확인 버튼: 선택 사항을 확인하거나 움직임을 중지합니다.
• 설정 버튼: 메모리 위치를 프로그래밍하는 데 사용됩니다.
• MEM1 / MEM2 Buttons: Recall pre-programmed view직책을 맡고 있습니다.

이미지 4: 이상view of the remote control and the mount's movement capabilities, including 90-degree swivel, +/- 1.5-degree tilt, VESA compatibility, and supported screen sizes (40-65 inches).

Image 5: A top-down perspective illustrating the wide swivel range of the TV mount, allowing the screen to be angled for optimal view방 안의 여러 위치에서.

5.2 Programming Memory Positions

1. Adjust the TV to your desired viewing position using the arrow buttons.
2. 를 누르세요 세트 button once. The indicator light on the remote may flash.
3. Within a few seconds, press either 멤1 or 멤2 to save the current position. The indicator light will confirm successful programming.
4. To recall a saved position, simply press 멤1 or 멤2.

6. 유지관리

• 청소: 부드럽고 마른 천으로 마운트를 닦으세요. 연마성 세제나 용제를 사용하지 마세요.
• 정기 점검: 모든 나사와 연결 부위를 정기적으로 점검하여 단단하고 안전하게 고정되어 있는지 확인하십시오.
• 케이블 검사: Periodically check cables for any signs of wear, fraying, or pinching, especially after moving the TV.

7. 문제 해결

8. 사양

Image 6: Detailed technical drawing showing the dimensions and movement ranges of the RICOO Electric Swivel TV Wall Mount SE2544 in millimeters.

9. 보증 및 지원

RICOO is a registered German trademark committed to quality and safety. For warranty information, technical support, or assistance with missing/damaged parts, please contact RICOO customer service directly. Refer to your purchase documentation for specific warranty terms and contact details.