TOTOLINK iPuppy III 150Mbps Wireless Access Point User Manual

1. 서론

The TOTOLINK iPuppy III is a compact and versatile 150Mbps wireless device designed to provide flexible network connectivity. It supports three primary operating modes: Access Point (AP), Router, and Repeater, making it suitable for various networking needs, from converting a wired connection to wireless to extending an existing Wi-Fi signal. Its micro USB power input allows for convenient powering via a computer or a standard USB power adapter.

2. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• TOTOLINK iPuppy III Device
• USB 케이블
• 빠른 설치 가이드
• Internet Cable (Ethernet Cable)
• 전단

3. 제품 오버view

기기의 포트와 표시등을 숙지하십시오.

그림 1: 뒤쪽 view of the iPuppy III, highlighting the Reset/WPS button, Ethernet port, and Micro USB power input.

그림 2: 맨 위 view of the iPuppy III, showing the TOTOLINK logo and status indicators.

그림 3: The iPuppy III held in a hand, illustrating its compact size.

4. 설정 및 구성

This section outlines the general steps for setting up your iPuppy III. Specific configuration details will depend on the operating mode you choose.

1. 전원 켜기: Connect the provided USB cable to the Micro USB Power In port on the iPuppy III and plug the other end into a computer's USB port or a USB power adapter (5V/1A recommended).
2. 초기 연결:
   • 무선 전화: On your computer or mobile device, search for available Wi-Fi networks. Connect to the network named "TOTOLINK_iPuppyIII" (default SSID).
   • 열광한: Connect one end of the Ethernet cable to the iPuppy III's Ethernet port and the other end to your computer's Ethernet port.
3. 입장 Web 인터페이스: 열기 web 브라우저를 열고 기본 IP 주소를 입력하세요(일반적으로 192.168.1.1 or itotolink.net) 주소 표시줄에 입력합니다.
4. 로그인: 기본 사용자 이름과 비밀번호를 입력하세요(일반적으로). 관리자/관리자 or found in the Quick Installation Guide).
5. 작동 모드 선택: Follow the on-screen wizard to select your desired operating mode (AP, Router, or Repeater) and configure its settings.

메모: For detailed, step-by-step instructions for each mode, refer to the Quick Installation Guide included in your package or the full user manual available on the TOTOLINK web대지.

5. 작동 모드

The iPuppy III supports three distinct operating modes:

5.1. AP 모드(액세스 포인트)

In AP mode, the iPuppy III converts a wired internet connection into a wireless Wi-Fi network. This is ideal for locations with only wired Ethernet access, allowing wireless devices to connect.

• Connect the iPuppy III's Ethernet port to a wired network (e.g., a modem or existing router's LAN port).
• Configure the wireless network name (SSID) and password via the web 인터페이스.
• Wireless devices can then connect to the new Wi-Fi network.

5.2. 라우터 모드

Router mode allows the iPuppy III to act as a primary router, providing internet access to multiple devices. It supports various internet connection types:

• DHCP : Automatically obtains an IP address from your Internet Service Provider (ISP).
• PPPoE : Requires a username and password provided by your ISP (common for DSL connections).
• 고정 IP: Requires manual entry of IP address, subnet mask, gateway, and DNS servers.

Connect the iPuppy III's Ethernet port to your modem. Configure the internet connection type and wireless settings through the web 인터페이스.

5.3. 리피터 모드

Repeater mode extends the coverage of an existing wireless network. The iPuppy III connects to an existing Wi-Fi signal and re-broadcasts it, eliminating Wi-Fi dead zones.

• Place the iPuppy III within range of your existing Wi-Fi network.
• 접근하기 web interface, select Repeater mode, and scan for available networks.
• Select your existing Wi-Fi network and enter its password.
• The iPuppy III will then extend that network's coverage.

6. 유지관리

To ensure optimal performance and longevity of your iPuppy III:

• 깨끗하게 유지하십시오: Regularly clean the device with a soft, dry cloth. Avoid liquid cleaners.
• 통풍: Ensure the device is placed in a well-ventilated area to prevent overheating. Do not block ventilation holes.
• 펌웨어 업데이트: 토토링크 공식 웹사이트를 주기적으로 확인하세요. web펌웨어 업데이트 사이트입니다. 펌웨어를 업데이트하면 성능을 향상시키고, 새로운 기능을 추가하고, 버그를 수정할 수 있습니다.
• 재설정 : If the device becomes unresponsive or you forget your login credentials, you can perform a factory reset by pressing and holding the RST/WPS button for approximately 5-10 seconds while the device is powered on. This will restore all settings to their factory defaults.

7. 문제 해결

If you encounter issues with your iPuppy III, try the following steps:

• 전원 없음:
  • USB 케이블이 기기와 전원에 제대로 연결되어 있는지 확인하십시오.
  • 다른 USB 포트나 전원 어댑터를 사용해 보세요.
• 접근할 수 없습니다 Web 인터페이스:
  • Verify your device is connected to the iPuppy III's network (wired or wireless).
  • 올바른 IP 주소를 사용하고 있는지 확인하십시오.192.168.1.1 or itotolink.net).
  • 브라우저 캐시를 지우거나 다른 브라우저를 사용해 보세요.
  • 방화벽이나 바이러스 백신 소프트웨어를 일시적으로 비활성화하세요.
• 인터넷 접속 불가:
  • Check the connection to your modem/main router.
  • Verify the operating mode is correctly configured (AP, Router, or Repeater).
  • In Router mode, ensure your ISP settings (DHCP, PPPoE, Static IP) are correctly entered.
  • Reboot the iPuppy III and your modem/main router.
• Weak Wi-Fi Signal or Disconnections:
  • Relocate the iPuppy III to a more central location, away from obstructions and interference sources (e.g., microwaves, cordless phones).
  • If in Repeater mode, ensure it is placed within good range of the main Wi-Fi signal.
  • 펌웨어 업데이트를 확인하십시오.
• 비밀번호를 잊으 셨나요: Perform a factory reset (see Maintenance section).

If problems persist, contact TOTOLINK technical support for further assistance.

8. 사양

9. 보증 및 지원

TOTOLINK products typically come with a limited warranty. Please refer to the warranty card included in your package or visit the official TOTOLINK web해당 지역의 자세한 보증 약관 및 조건은 해당 사이트에서 확인하세요.

For technical support, product registration, or to download the latest drivers and firmware, please visit the official TOTOLINK support website. Contact information for customer service may also be found on the product packaging or the official web대지.