소개
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Ecolink Z-Wave Tilt Sensor (TILT-ZWAVE2-ECO). This device is designed to monitor the tilt status of objects, primarily garage doors, and communicate this status wirelessly via Z-Wave technology to a compatible smart home hub. Ensure you read these instructions thoroughly before installation and use.
제품 끝view
이미지 1: 앞쪽 view of the Ecolink Z-Wave Tilt Sensor. The sensor is a compact, white rectangular device with a small black indicator light on its front surface.
주요 특징
- Reliable Tilt Detection: Utilizes gold-plated components for consistent performance.
- Z-Wave 호환성: Works with most Z-Wave certified smart home hubs.
- 긴 배터리 수명: Designed for up to five years of operation on a single CR123 battery.
- Discrete Design: Compact form factor for unobtrusive installation.
- External Contact Input: Allows for connection of an external wired sensor.
- 간편한 설치: Includes flush mount bracket and adhesive options.
패키지 내용
- Ecolink Z-Wave Tilt Sensor (TILT-ZWAVE2-ECO)
- CR123 리튬 배터리 (사전 설치 또는 별도 구매)
- 장착 브래킷
- 장착 나사 및 앵커
- 양면 접착 테이프
- 사용 설명서(본 문서)
설정
1. 배터리 설치
- Remove the back cover of the sensor by gently prying it open or sliding it off, depending on the model.
- Insert the included CR123 lithium battery, observing the correct polarity (+/-).
- Replace the back cover, ensuring it clicks securely into place. The sensor's LED may flash briefly to indicate power.
2. Z-Wave 통합(페어링)
To integrate the sensor into your Z-Wave network, follow these steps:
- Z-Wave 허브를 연결(페어링) 모드로 설정하십시오. 자세한 단계는 허브 사용 설명서를 참조하십시오.
- With the sensor powered on, press the tamper switch (located inside the sensor, often a small button or lever) once. The sensor's LED will flash to indicate it is attempting to pair.
- If inclusion is successful, the LED will stop flashing, and your Z-Wave hub should confirm the new device.
- If inclusion fails, the LED may flash rapidly or remain off. Try repeating the process or performing an exclusion first.
3. Z-Wave 제외(페어링 해제)
To remove the sensor from your Z-Wave network:
- Z-Wave 허브를 제외(페어링 해제) 모드로 설정하십시오. 자세한 단계는 허브 사용 설명서를 참조하십시오.
- t를 누르세요amper switch on the sensor once. The sensor's LED will flash to indicate it is attempting to unpair.
- If exclusion is successful, the LED will stop flashing, and your Z-Wave hub should confirm the device has been removed.
4. 센서 장착
The sensor can be mounted using screws or double-sided adhesive tape. For garage doors, mount the sensor on the top panel of the garage door, ensuring it changes orientation (tilts) when the door opens or closes.
- 위치: Choose a location on the top panel of the garage door where the sensor will clearly tilt when the door moves.
- 접착 장착: Clean the mounting surface thoroughly. Apply the double-sided adhesive tape to the back of the sensor or mounting bracket and firmly press it onto the desired location for at least 30 seconds.
- 나사 장착: Use the included mounting bracket as a template. Mark the screw holes, drill pilot holes if necessary, and secure the bracket with the provided screws. Attach the sensor to the bracket. For added security, a small security screw may be used to fasten the sensor to the bracket (refer to the sensor's internal design for the security screw location).
- 정위: Ensure the sensor is mounted in an orientation where its internal tilt mechanism can accurately detect the open and closed states of the garage door. Typically, this means mounting it vertically when the door is closed, so it becomes horizontal when the door is open.
작동 지침
기울기 감지
The Ecolink Z-Wave Tilt Sensor detects changes in its physical orientation. When mounted correctly on a garage door, it will report an "open" status to your Z-Wave hub when the door is open (sensor is horizontal) and a "closed" status when the door is closed (sensor is vertical). This status is communicated wirelessly to your Z-Wave network, allowing for automation and notifications.
External Contact Input
The sensor includes an external contact input. This allows you to connect a separate wired normally-closed (NC) or normally-open (NO) contact sensor (e.g., a magnetic reed switch) to the tilt sensor. When the external contact changes state, the tilt sensor will report this status to your Z-Wave hub. This feature can be used for monitoring a secondary point or for applications where a tilt sensor is not suitable.
- To use the external input, connect the two wires from your external contact sensor to the designated terminals inside the Ecolink Tilt Sensor.
- Refer to your Z-Wave hub's documentation for configuring how the external input reports its status.
유지
배터리 교체
The Ecolink Z-Wave Tilt Sensor uses one CR123 lithium battery. When the battery level is low, your Z-Wave hub should report a low battery warning. To replace the battery:
- Remove the sensor from its mounting bracket or detach it from the adhesive.
- Open the back cover of the sensor.
- 오래된 CR123 배터리를 조심스럽게 제거하세요.
- 새로운 CR123 리튬 배터리를 삽입할 때 극성을 올바르게 맞춰주세요.
- Replace the back cover and re-mount the sensor.
- It may be necessary to wake up the sensor or refresh its status on your Z-Wave hub after battery replacement to update the battery level.
메모: 오래된 배터리는 해당 지역 규정에 따라 폐기하세요.
문제 해결
| 문제 | 가능한 원인 / 해결책 |
|---|---|
| Sensor does not pair with Z-Wave hub. |
|
| Sensor reports incorrect status (e.g., always open/closed). |
|
| 배터리 수명이 짧습니다. |
|
| Sensor loses connection to Z-Wave hub. |
|
명세서
| 기인하다 | 세부 사항 |
|---|---|
| 모델 번호 | TILT-ZWAVE2-ECO |
| 무선 기술 | 지웨이브 |
| 전원 | 1 x CR123 리튬 배터리(포함) |
| 배터리 수명 | Up to 5 years (typical usage) |
| 치수(길이 x 너비 x 높이) | 3.0 x 1.7 x 1.0인치(7.62 x 4.32 x 2.54cm) |
| 무게 | 2.89 온스(81.9g) |
| 재료 | 아크릴로니트릴 부타디엔 스티렌(ABS) |
| 장착 유형 | Door Mount (Screws or Adhesive) |
| 운영 환경 | 실내에서만 사용 가능 |
| Sensing Distance (Z-Wave Range) | Up to 100 feet (30 meters) line of sight, varies with environment |
| 한국어: | 851166005022 |
보증 및 지원
Ecolink products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official Ecolink website. For technical support, troubleshooting assistance, or further inquiries, please contact Ecolink customer service through their official channels.
에코링크 공식 Web대지: Visit the Ecolink Store on Amazon
