1. 서론
This manual provides comprehensive instructions for the installation, operation, and maintenance of the BANNER ENGINEERING R58ECRGB1Q Photoelectric Sensor. This sensor is designed for industrial applications requiring precise object detection using a parallel sensing beam.
The R58ECRGB1Q features 1 NPN and 1 PNP output, bipolar operation, and a Euro 5-PIN Pigtail connector, accepting an input voltage 10-30VDC.
Figure 1: BANNER ENGINEERING R58ECRGB1Q Photoelectric Sensor. This image displays the sensor's black housing with a prominent yellow label. Visible features include control indicators such as "DO", "LO", "OFF", "ON", and "DYNAMIC", along with a "SWITCH POINT" scale from 1 to 8. A bright red sensing beam is emitted from the sensor's lens, indicating its active state. The sensor is shown in an operational context, positioned above a moving material, typical of an industrial automation setup.
2. 안전 정보
Read all instructions carefully before installing or operating the sensor. Failure to follow these instructions may result in product damage, property damage, or serious injury.
- 설치나 유지관리를 하기 전에 전원이 차단되어 있는지 확인하세요.
- 자격을 갖춘 사람만 이 장치를 설치하고 유지보수해야 합니다.
- 지정된 입력 볼륨을 초과하지 마십시오tage 범위(10-30VDC).
- Protect the sensor from excessive vibration, shock, and extreme temperatures.
- Avoid direct exposure of the eyes to the emitted light beam.
3. 설정 및 설치
3.1 장착
Mount the R58ECRGB1Q sensor securely using appropriate hardware. Ensure the sensing beam path is clear and unobstructed for optimal performance. The sensor should be positioned to allow for proper alignment with the target object.
3.2 배선
The sensor features a Euro 5-PIN Pigtail connector. Refer to the following general wiring guide. Consult specific product documentation or wiring diagrams provided with your sensor for exact pin assignments, as configurations may vary.
- 핀 1 : +VDC (10-30 VDC)
- 핀 2 : NPN 출력
- 핀 3 : 0 VDC (Ground)
- 핀 4 : PNP 출력
- 핀 5 : Not Used / Function Input (Refer to specific model documentation)
모든 연결 부분이 안전하고 절연되어 있는지 확인하여 단락을 방지하세요.
4. 작동 및 구성
The R58ECRGB1Q sensor includes "Dynamic Teach" and "Static Teach" functions for precise configuration of sensing thresholds.
4.1 Dynamic Teach
Dynamic Teach is used for teaching the sensor to detect variations in a moving target or background. This method is ideal for applications where the target and background are similar or where the target is moving.
- Hold DYNAMIC: Press and hold the "DYNAMIC" button on the sensor.
- Present Conditions: While holding the button, pass the target object(s) through the sensing beam, or present the range of conditions you wish the sensor to learn.
- LEDs Flash: Observe the indicator LEDs; they will flash during the teaching process.
- Release DYNAMIC: Release the "DYNAMIC" button once the desired conditions have been presented. The sensor will store the learned parameters.
4.2 Static Teach
Static Teach is used for teaching the sensor distinct ON and OFF conditions, typically for stationary targets or clear differentiation between target and background.
- Hold STATIC: Press and hold the "STATIC" button (or equivalent teach button, if "STATIC" is not explicitly labeled, refer to the "SWITCH POINT" area for teach button). Hold until the LEDs begin to flash.
- Present ON Condition: Present the object or condition that should trigger an "ON" state. Click the "STATIC" button once to register this condition.
- Present OFF Condition: Present the object or condition that should trigger an "OFF" state (e.g., no object, background). Click the "STATIC" button once to register this condition.
- The sensor will then be configured based on these two distinct states.
4.3 Indicators and Controls
The sensor features several indicators and controls for status monitoring and adjustment:
- DO (Dark Operate) / LO (Light Operate): Indicates the output state based on light or dark conditions.
- OFF / ON: General status indicators for the sensor's output.
- 동적: Button/indicator for Dynamic Teach mode.
- SWITCH POINT (1-8): A multi-position switch or indicator for setting sensitivity or teach points. Refer to specific product diagrams for exact functionality.
5. 유지관리
The R58ECRGB1Q sensor is designed for minimal maintenance. Regular inspection and cleaning are recommended to ensure optimal performance.
- 청소: Periodically clean the sensor lens and housing with a soft, damp 천으로 닦으세요. 소재를 손상시킬 수 있는 연마성 세제나 용제는 사용하지 마세요.
- 점검: Check wiring and connections for any signs of wear, damage, or corrosion. Ensure mounting hardware remains secure.
- 환경: 작동 환경이 지정된 온도 및 습도 범위 내에 유지되도록 하세요.
6. 문제 해결
센서가 예상대로 작동하지 않는 경우 다음과 같은 일반적인 문제와 해결 방법을 고려하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 센서 전원이 켜지지 않습니다. | 전원 공급 없음; 배선 오류; 전원 공급 장치 불량. | Verify power connections (10-30 VDC); check wiring for shorts or breaks; test power supply. |
| Sensor not detecting objects. | Misalignment; dirty lens; incorrect teach setting; object too small/far. | Re-align sensor and target; clean lens; re-perform Dynamic or Static Teach; ensure object is within sensing range. |
| Erratic or inconsistent detection. | Environmental interference (dust, steam); unstable mounting; reflective surfaces. | Clean environment; secure mounting; adjust sensor angle or use retroreflective tape if applicable. |
| Output always ON or OFF. | Incorrect teach setting; sensor damaged. | Re-perform teach procedure; if problem persists, sensor may require replacement. |
If troubleshooting steps do not resolve the issue, contact BANNER ENGINEERING technical support.
7. 기술 사양
| 매개변수 | 값 |
|---|---|
| 모델 번호 | R58ECRGB1Q |
| 부품 번호 | R58ECRGB1Q |
| 상표 | BANNER ENGINEERING |
| 제조업체 | BANNER ENGINEERING |
| 입력 Voltage | 10-30VDC |
| 출력 | 1 NPN, 1 PNP, Bipolar |
| 커넥터 유형 | Euro 5-PIN Pigtail |
| 감지 유형 | Parallel Sensing Beam, Photoelectric |
| 재료 | 구리 |
| 품목 패키지 크기(L x W x H) | 3.96 x 2.04 x 2.04 인치 |
| 패키지 무게 | 2.2 파운드 |
| 첫 번째 이용 가능 날짜 | 23년 2013월 XNUMX일 |
8. 보증 정보
BANNER ENGINEERING warrants its products against defects in materials and workmanship for a period specified in their standard warranty terms. This warranty typically covers repair or replacement of defective products. It does not cover damage resulting from improper installation, misuse, abuse, or unauthorized modifications.
For detailed warranty terms and conditions, please refer to the official BANNER ENGINEERING web사이트를 방문하거나 고객 서비스에 문의하세요.
9. 고객 지원
For technical assistance, product inquiries, or service requests, please contact BANNER ENGINEERING customer support:
- Web대지: www.bannerengineering.com
- 핸드폰: 참조 web지역 연락처 사이트.
- 이메일: 참조 web고객 지원 이메일 주소 사이트입니다.
When contacting support, please have your product model number (R58ECRGB1Q) and a detailed description of the issue ready.
