GBC 스택앤슈레드 300M 마이크로컷 문서 파쇄기 사용 설명서

1. 서론

This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your GBC Stack-and-Shred 300M Micro-Cut Paper Shredder. Please read this manual thoroughly before using the shredder and retain it for future reference.

2. 안전 정보

Observe the following safety precautions to prevent injury or damage to the shredder:

• 손, 머리카락, 헐렁한 옷, 넥타이, 장신구는 종이 투입구에 닿지 않도록 하십시오.
• 어린이나 애완동물이 파쇄기 근처에 접근하지 못하게 하십시오.
• 사용하지 않을 때나 청소하기 전에는 분쇄기의 전원 플러그를 콘센트에서 뽑으세요.
• Do not shred metal objects, wet paper, or adhesive labels in the auto-feed tray.
• 파쇄기는 평평하고 안정적인 표면에서 작동하십시오.
• Do not attempt to service the shredder yourself. Refer all servicing to qualified personnel.

3. 상자 안에 무엇이 들어있나요?

포장을 풀 때 다음 품목이 포함되어 있는지 확인하세요.

• GBC Stack-and-Shred 300M Paper Shredder Unit
• 사용 설명서(본 문서)
• One Swingline Recyclable Paper Shredder Bag
• One Plastic Shredder Bag

4. 설정

다음 단계를 따라 파쇄기를 설치하세요:

1. Place the shredder on a level surface. Ensure adequate space around the unit for ventilation and waste bin access.
2. Open the waste bin door and insert a shredder bag (either the provided recyclable paper bag or a plastic bag) into the 11-gallon pull-out waste bin. Ensure the bag is properly seated.
3. Close the waste bin door securely.
4. 전원 코드를 접지된 전기 콘센트에 연결합니다.
5. Locate the main power switch, typically on the back of the unit, and turn it to the 'ON' position.

5. 사용 설명서

5.1. Auto Feed Shredding

The auto-feed feature allows for hands-free shredding of multiple sheets:

1. 파쇄기의 전원이 켜져 있는지 확인하십시오.
2. Open the auto-feed tray lid located on top of the shredder.
3. Stack up to 300 sheets of paper neatly into the auto-feed chamber. Ensure papers are flat and unfolded.
4. Close the auto-feed tray lid. The shredder will automatically begin feeding and shredding the documents.
5. The shredder will stop automatically once all documents in the auto-feed tray have been processed.

5.2. Manual Feed Shredding

For smaller quantities or specific items, use the manual feed slot:

• 수동 급지 슬롯에 최대 7장의 용지를 넣으십시오.
• Credit cards must be manually inserted one at a time into the designated slot.
• CDs/DVDs can be shredded through a separate slot, also manually.
• The shredder will activate when paper is detected and stop when shredding is complete.

5.3. Lockable Paper Chamber

To secure sensitive documents during auto-feed shredding, utilize the lockable paper chamber:

• Load documents into the auto-feed tray.
• Close the lid and engage the 4-digit programmable PIN code lock. This prevents unauthorized access to documents while they are awaiting shredding.
• The shredder will process the documents once the lock is disengaged or the shredding cycle is complete.

5.4. Waste Bin Management

The shredder features an 11-gallon pull-out waste bin:

• Monitor the waste bin full indicator to know when it needs emptying.
• When full, pull out the waste bin, remove the shredded contents, and replace the bag.
• Ensure the bin is fully reinserted for the shredder to operate.

6. 유지관리

Regular maintenance ensures optimal performance and longevity of your shredder:

6.1. Self-Cleaning Cutters

The shredder is equipped with self-cleaning cutters that automatically remove shred build-up. No user intervention is typically required for this feature.

6.2. Oiling the Shredder

To maintain cutting performance and reduce noise, it is recommended to oil the shredder regularly, especially after emptying the waste bin multiple times or after heavy use. Use a shredder-specific oil sheet or liquid shredder oil applied across the manual feed slot.

6.3. 외부 청소

분쇄기 외부를 부드럽고 마른 천으로 닦으십시오. 연마성 세척제나 용제를 사용하지 마십시오.

7. 문제 해결

다음의 일반적인 문제와 해결책을 참조하세요.

• Shredder does not power on: Ensure the power cord is securely plugged into a working outlet and the main power switch is in the 'ON' position. Check if the waste bin is fully inserted.
• 용지 걸림: The shredder features Intelligent Auto+ Jam Clearance, which automatically reverses and re-feeds stuck papers. If a jam persists, turn off the shredder, unplug it, and carefully remove the jammed paper from the feed slot.
• Shredder stops during operation: This may indicate the shredder has reached its continuous run time limit (16 minutes) and needs to cool down. Allow the unit to rest for approximately 30-45 minutes before resuming operation. A full waste bin will also stop operation.
• Power Save feature: The shredder includes an automatic shut-down feature to conserve energy. If the shredder enters power save mode, simply press any button or feed paper to reactivate it.

8. 사양

9. 보증 및 지원

9.1. 보증 정보

The GBC Stack-and-Shred 300M Micro-Cut Paper Shredder is backed by a limited 2-year warranty on the unit and a limited 15-year warranty on the cutters. Please retain your proof of purchase for warranty claims.

9.2. 고객 지원

For technical assistance, warranty inquiries, or to order replacement parts, please contact GBC customer support. Refer to the contact information provided on the GBC official web사이트 또는 제품 등록 자료.