1. 서론
The Fieldpiece SPK3 is a versatile dual-temperature thermometer designed for HVACR professionals. It combines a folding rod temperature probe for in-duct measurements with an 8:1 infrared (IR) gun for non-contact surface temperature readings. This device features a convenient flip display, Max/Min, Hold, and T1-T2 functions, and a robust design for field use.
Image 1.1: The Fieldpiece SPK3 thermometer, showing its folding rod probe extended and the infrared sensor. The display shows temperature readings.
2. 설정
2.1 배터리 설치
- 장치 뒷면에서 배터리 덮개를 찾으세요.
- 작은 드라이버나 동전을 사용하여 배터리함을 여세요.
- Insert two (2) AAA batteries, ensuring correct polarity (+/-). The batteries are included with the device.
- 배터리함 덮개를 교체하고 고정합니다.
2.2 초기 전원 켜기
를 누르세요 켜짐/꺼짐 button to power on the device. The display will illuminate, and the thermometer will be ready for use.
3. 사용 설명서
3.1 일반 작업
- 전원 켜기/끄기: 를 누르세요 켜짐/꺼짐 버튼을 눌러 장치를 켜거나 끕니다.
- 단위 선택: 를 누르세요 ° C / ° F button to switch between Celsius and Fahrenheit temperature units.
- 백라이트: The display is backlit for visibility in low-light conditions.
3.2 Folding Rod (ROD) Mode
The folding rod probe is designed for accurate in-duct temperature measurements.
- Deploying the Probe: Gently unfold the rod probe from the main body of the thermometer. Detents will lock the probe into various open positions, allowing for partial or full extension.
- In-Duct Measurement: Insert the piercing tip of the rod into the ductwork. The rod hook allows the SPK3 to hang hands-free from registers or ductwork, providing stable readings.
- 디스플레이 방향: The backlit display automatically flips its orientation when the unit is hung or positioned in ROD mode, ensuring readings are always upright.
3.3 Infrared (IR) Mode
The 8:1 infrared gun provides quick, non-contact surface temperature measurements.
- Activating IR: Point the infrared sensor (located at the top of the unit) towards the target surface.
- 측정: 를 누르고 계세요 IR button to take a reading. The temperature will be displayed on the screen. Release the button to hold the reading.
- 거리 대 지점 비율: The 8:1 ratio means that at a distance of 8 inches, the measurement spot size is 1 inch. Ensure you are close enough to the target for accurate readings.
3.4 고급 기능
- 최대/최소: 를 누르세요 최대/최소 버튼을 view 측정 세션 동안 기록된 최고 또는 최저 온도.
- 보류: 를 누르세요 잡고 있다 버튼을 눌러 현재 온도를 디스플레이에 고정합니다. 다시 누르면 해제됩니다.
- T1-T2: The SPK3 can quickly calculate the temperature difference between two readings (T1-T2) using either IR or ROD mode. Refer to the on-screen prompts for specific instructions on using this function.
4. 유지관리
4.1 청소
To clean the SPK3, wipe the exterior with a damp cloth. Do not use abrasive cleaners or immerse the unit in water. Ensure the infrared lens and probe tip are kept clean for accurate measurements.
4.2 배터리 교체
When the battery indicator appears on the display, replace the AAA batteries as described in Section 2.1.
4.3 보관
When not in use, fold the rod probe back into the body of the thermometer for protection. Store the unit in a dry environment, away from extreme temperatures and direct sunlight.
5. 문제 해결
- 화면이 표시되지 않거나 기기가 켜지지 않습니다.
- 배터리 설치를 확인하고 극성이 올바른지 확인하세요.
- 배터리를 새 것으로 교체하십시오.
- Inaccurate Readings (ROD Probe):
- 프로브 끝이 깨끗하고 이물질이 없는지 확인하세요.
- Allow sufficient time for the probe to stabilize to the measured temperature.
- Verify the probe is fully inserted into the measurement area.
- Inaccurate Readings (IR Gun):
- Ensure the IR lens is clean.
- Maintain the correct distance-to-spot ratio (8:1).
- Avoid measuring highly reflective surfaces, as IR thermometers may provide inaccurate readings on such materials.
- Display Not Flipping:
- Ensure the unit is in ROD mode and positioned appropriately for the automatic flip feature to engage.
6. 사양
| 특징 | 사양 |
|---|---|
| 모델명 | SPK3 |
| 특징 | Dual Probe, Non-Contact |
| 디스플레이 유형 | 디지털 |
| 연결 기술 | 적외선 |
| 전원 | Battery Powered (2 AAA batteries, included) |
| 품목 무게 | 5.3 온스 |
| 품목 길이 | 5 인치 |
| 상한 온도 등급 | 화씨 932도 |
| 낮은 온도 등급 | 화씨 32도 |
| 응답 시간 | 500밀리초 |
| Immersion Depth (Rod) | 3.75 인치 |
| 겉감 소재 | Stainless Steel, Aluminum, Polypropylene |
| 사양 충족 | CE, FCC, NIST |
| 평균 배터리 수명 | 3시간 |
7. 보증 및 지원
7.1 보증 정보
The Fieldpiece SPK3 comes with a 1년 제조사 보증 구매일로부터. 본 보증은 정상적인 사용 중 발생하는 재료 및 제조상의 결함에 적용됩니다. 보증 청구를 위해 구매 증빙 자료를 보관해 주십시오.
7.2 고객 지원
For technical assistance, troubleshooting, or warranty inquiries, please contact Fieldpiece customer support. Visit the official Fieldpiece web연락처 정보와 추가 자료는 해당 사이트를 참조하세요.
온라인 리소스: www.fieldpiece.com
