1. 서론
This manual provides essential information for the safe and efficient operation, setup, and maintenance of your Virutex SRI174T Incision Saw. Please read this manual thoroughly before using the tool to ensure proper handling and to prevent injury or damage.
1.1 안전 정보
화재, 감전, 부상의 위험을 줄이기 위해 항상 기본 안전 수칙을 준수하십시오. 나중에 참고할 수 있도록 이 설명서를 보관하십시오.
- 안전 안경, 청력 보호 장비, 장갑 등 적절한 개인 보호 장비(PPE)를 착용하세요.
- 작업 공간이 깨끗하고, 조명이 밝으며, 방해물이 없는지 확인하세요.
- 톱을 작동하는 동안 어린이와 구경꾼이 접근하지 못하게 하십시오.
- Disconnect the saw from the power supply before making any adjustments, changing accessories, or performing maintenance.
- 절단할 재료에 맞는 톱날을 사용하십시오.
- 공구를 억지로 사용하지 마십시오. 톱날이 스스로 일하도록 두십시오.
2. 제품 오버view
The Virutex SRI174T is a powerful 1150W circular saw designed for precise incision cuts in various materials, including wood and plastic. Its ergonomic design and advanced features ensure user comfort and operational safety.
Figure 2.1: Virutex SRI174T Incision Saw. This image shows the overall design of the saw, highlighting its compact and ergonomic form factor.
2.1 주요 특징
- Solid and Ergonomic Design: Provides comfortable handling and control.
- Rail Compatibility: The saw slides directly on guide rails without the need for intermediate accessories (guide rails sold separately).
- 강력한 모터: 1150W motor suitable for cutting various materials.
- Automatic Disconnection System: Protects the tool in case of overvoltage.
- Soft Start Motor: Prevents sudden jolts upon startup.
- 급정지: Rapidly stops the saw blade for enhanced safety.
- Non-slip Rear Handle (Soft Grip): Improves grip and reduces fatigue.
- 잠금 레버: Simplifies saw blade changes and divider knife adjustments.
- Vacuum Cleaner Socket: Allows connection to an external vacuum cleaner for dust extraction.
2.2 포함된 구성 요소
- Virutex SRI174T Incision Saw
- MD Saw Blade (Ø 160 mm, 28 teeth) for wood and plastic
- 흡입 노즐
- 운반 케이스
- 서비스 키
3. 설정
3.1 블레이드 설치 및 제거
- Ensure the saw is disconnected from the power supply.
- Locate the locking lever (refer to Figure 2.1 for general location). Engage the locking lever to secure the saw blade.
- Using the provided service keys, loosen the blade retaining screw.
- 오래된 블레이드를 조심스럽게 제거합니다.
- Install the new blade, ensuring the rotation direction matches the arrow on the saw.
- Tighten the blade retaining screw securely. Disengage the locking lever.
3.2 Connecting to a Vacuum Cleaner
For a cleaner work environment and improved visibility, connect an external vacuum cleaner to the saw's suction nozzle. Ensure the vacuum cleaner hose is securely attached to prevent accidental disconnection during operation.
3.3 옵션 액세서리
For enhanced precision and versatility, consider using optional accessories such as guide rails (e.g., UCP174T 800 mm or 1400 mm), jointing sets, vacuum pads, or clamping screws. Refer to the accessory documentation for installation and usage instructions.
4. 운영
4.1 전원 연결
Connect the saw to a suitable power outlet (230 Volts AC). The soft start feature will ensure a smooth power-up.
4.2 절단 깊이 조정
The cutting depth can be adjusted to suit the material thickness. The saw offers a maximum cutting depth of 55 mm at 90° and 35 mm at 45°. Refer to the saw's depth adjustment mechanism for precise settings.
4.3 기본 절단 절차
- 절삭 중 움직임을 방지하기 위해 공작물을 단단히 고정하십시오.
- Set the desired cutting depth and angle.
- Position the saw on the workpiece, ensuring the blade is clear of the material before starting.
- Start the saw. Allow the blade to reach full speed before engaging with the material.
- 톱을 재료를 통과할 때 부드럽고 안정적으로 움직이십시오. 톱을 무리하게 사용하지 마십시오.
- Once the cut is complete, release the trigger and allow the blade to come to a complete stop using the quick stop feature before lifting the saw from the workpiece.
5. 유지관리
5.1 청소
Regularly clean the saw, especially the blade guard, motor vents, and suction nozzle, to ensure optimal performance and prevent overheating. Use a dry cloth or compressed air. Do not use solvents or abrasive cleaners.
5.2 블레이드 관리
Inspect the saw blade before each use for sharpness, cracks, or damage. A dull or damaged blade can cause kickback and reduce cutting efficiency. Replace worn blades promptly following the procedure in Section 3.1.
6. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 톱이 시작되지 않음 | No power supply; Faulty power cord/plug; Overvoltag전자 보호 활성화됨 | Check power connection; Inspect cord/plug for damage; Disconnect and reconnect power to reset overvoltag전자 보호. |
| 절단 성능 저하 | Dull or incorrect blade; Accumulation of sawdust; Incorrect cutting depth | Replace blade or use appropriate blade for material; Clean saw and suction nozzle; Adjust cutting depth. |
| 과도한 진동 | Damaged or improperly installed blade; Loose components | Inspect and correctly install blade; Check all fasteners for tightness. |
If you encounter issues not listed here or if solutions do not resolve the problem, contact Virutex customer support or a qualified service technician.
7. 사양
| 특징 | 사양 |
|---|---|
| 모델 | SRI174T |
| 힘 | 1150와트 |
| 권tage | 230 볼트 AC |
| 톱날 직경 | 160mm (XNUMXmm) |
| 톱날 구멍 | 20mm (XNUMXmm) |
| 톱니 개수 (날 포함) | 28 |
| 90°에서 절단 깊이 | 55mm (XNUMXmm) |
| 45°에서 절단 깊이 | 35mm (XNUMXmm) |
| 무부하 속도 | 5500 분당 |
| 무게 | 4.7kg (약 10.36파운드) |
| 블레이드 소재 | 고속강철 |
| 표면 추천 | 플라스틱, 목재 |
| 손잡이 재질 | 고무 |
| 제품 크기(L x W x H) | 13.9인치 x 12.7인치 x 13.9인치 |
8. 보증 및 지원
For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official Virutex web사이트. 보증 청구에 대비해 구매 증빙 자료로 구매 영수증을 보관하세요.
For further assistance, you may contact Virutex customer service through their official channels.