소개
This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of the Dante Products NG.BVS.CR Universal Log Lighter Combo Kit. This kit is designed to provide a convenient and clean method for igniting natural gas logs in a fireplace.
설치 및 사용 전에 모든 지침을 주의 깊게 읽어 주십시오. 나중에 참조할 수 있도록 이 설명서를 보관하십시오.
제품 구성 요소
The Dante Universal Log Lighter Combo Kit includes the following components:
그림 1: 위에view of the Dante Universal Log Lighter Combo Kit components. This image displays all parts included in the kit: a chrome-plated key for operating the valve, a circular chrome floor plate that covers the valve opening, a long metal tube which is the natural gas log lighter with an attached mixer at one end, and a brass T-fitting for gas line connection.
- Natural Gas Log Lighter: A 20-inch long tube with an integrated air/gas mixing chamber, designed for efficient gas combustion.
- Quarter-Turn Ball Valve: A straight 1/2-inch valve for controlling gas flow.
- Chrome Floor Plate: A decorative zinc die-cast, chrome-plated plate to cover the valve opening.
- 3-Inch Key: A zinc die-cast, chrome-plated key for operating the quarter-turn ball valve.
- Brass T-Fitting: For connecting the gas supply line.
설정 및 설치
중요한 안전 정보: Installation must be performed by a qualified professional in accordance with all local codes and regulations. Ensure the main gas supply is turned off before beginning installation.
- Prepare Fireplace: Ensure the fireplace is clean and free of debris. Identify the location for the gas line connection.
- 가스 배관 연결: Connect the natural gas supply line to the brass T-fitting. Use appropriate pipe sealant on all threaded connections to prevent leaks.
- Install Ball Valve: Attach the quarter-turn ball valve to the T-fitting. Ensure it is securely tightened.
- Position Log Lighter: Connect the natural gas log lighter tube to the ball valve. Position the log lighter within the fireplace, ensuring the burner holes face upwards and are clear of any obstructions. The log lighter measures 20 inches from end to end with the mixer attached.
- Install Floor Plate: Place the chrome floor plate over the valve stem opening in the hearth or floor, ensuring it sits flush.
- 누출 테스트: After all connections are made, slowly turn on the main gas supply. Apply a leak detection solution (soapy water) to all connections. Bubbles indicate a leak. If a leak is detected, turn off the gas supply immediately, tighten connections, and re-test. Do not proceed until all leaks are resolved.
- Place Gas Logs: Arrange your gas logs over the log lighter, ensuring they do not block the burner holes or the air/gas mixing chamber. Allow adequate air circulation around the log lighter.
작동 지침
안전이 최우선입니다. Always ensure proper ventilation when operating gas appliances. Never leave an active flame unattended.
- 오픈 디amp어: 벽난로가 제대로 작동하는지 확인하세요amper is fully open before lighting to allow for proper ventilation and prevent smoke from entering the room. The log lighter heats the chimney quickly, causing the fireplace to draw smoke immediately up the chimney.
- 삽입 키: Insert the 3-inch chrome key into the quarter-turn ball valve stem.
- 가스 밸브를 켜세요: Slowly turn the key to the "ON" position (typically a quarter-turn). You should hear the sound of gas flowing.
- Ignite Gas: Immediately use a long fireplace lighter or match to ignite the gas flowing from the log lighter. The flame should be visible and consistent.
- 화염 조정: Once the logs are ignited, you can adjust the flame intensity by partially turning the key towards the "OFF" position. For full ignition of logs, allow the log lighter to burn for a few minutes until the logs are sufficiently lit.
- Turn Off Log Lighter: Once the gas logs are burning steadily, turn the key to the "OFF" position to extinguish the log lighter flame. Remove the key.
유지
The Dante Universal Log Lighter Combo Kit requires minimal maintenance. Regular inspection is recommended to ensure safe and efficient operation.
- 연례 검사: Have a qualified professional inspect the gas connections and the log lighter annually for any signs of wear, corrosion, or leaks.
- Clean Burner Holes: Periodically check the burner holes on the log lighter tube for any obstructions (e.g., soot, debris). Use a small brush or wire to clear them if necessary. Ensure the gas supply is off before cleaning.
- 깨끗한 구성 요소: Wipe down the chrome floor plate and key with a soft, damp cloth to maintain their appearance. Avoid abrasive cleaners.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| No gas flow or weak flame. |
|
|
| 가스 냄새가 감지되었습니다. |
|
|
| Log lighter does not ignite. |
|
|
문제 해결 단계를 수행해도 문제가 해결되지 않으면 자격을 갖춘 서비스 기술자에게 문의하세요.
명세서
| 모델 번호 | NG.BVS.CR |
| 상표 | Dante Products |
| 연료 유형 | 천연가스(NG) |
| Log Lighter Length | 20 inches (end to end with mixer) |
| BTU 등급 | 30,000비티유 |
| 밸브 크기 | 1/2-inch (straight quarter-turn ball valve) |
| Material (Key & Floor Plate) | Zinc Die-Cast, Chrome Plated |
| 전체 치수 | 24 x 3 x 3 인치 |
| 품목 무게 | 3 파운드 |
| 조립이 필요합니다 | 예 |
| 필요한 배터리 | 아니요 |
보증 정보
The Dante Products NG.BVS.CR Universal Log Lighter Combo Kit comes with a 1 년 제한 보증 구매일로부터.
This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, misuse, abuse, accident, neglect, or unauthorized repairs. For warranty claims, please retain your proof of purchase and contact Dante Products customer support.
고객 지원
For technical assistance, replacement parts, or warranty inquiries, please contact Dante Products customer support.
Please have your model number (NG.BVS.CR) and proof of purchase available when contacting support.
For additional information and resources, you may visit the official Dante Products website (if available, link would be here).
제조업체: Dante Products
