소개
This manual provides detailed instructions for the installation, operation, and maintenance of your Project Source Chrome 2-Handle 4-in Centerset WaterSense Bathroom Sink Faucet. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product. Keep this manual for future reference.
제품 끝view
The Project Source Chrome 2-Handle 4-in Centerset WaterSense Bathroom Sink Faucet is designed for both home and RV use, offering a modern aesthetic with practical features.
주요 특징:
- Home and RV Compatible
- 3-hole Deck Mount Installation on 4-in center
- Meets WaterSense criteria to conserve water without sacrificing performance, with a max flow rate of 1.2-GPM
- Sleek low arc spout allows plenty of sink space
- Easy Installation with Drop and Lock Drain

그림 1: 앞쪽 view of the Project Source Chrome 2-Handle Bathroom Sink Faucet, showcasing its polished chrome finish and modern design.

그림 2: The Project Source Chrome Faucet installed on a white bathroom vanity, highlighting its compact and elegant profile.

그림 3: 옆 view of the Project Source Chrome Faucet, demonstrating the clearance provided by its low arc spout above the sink basin.
설정 및 설치
This faucet is designed for 3-hole deck mount installation on 4-inch centers. The included Drop and Lock Drain simplifies the installation process.
Installation Steps for Drop & Lock Drain:
- Drop & Lock: 배수 어셈블리를 싱크대 배수구에 삽입하십시오.
- 잠그다: Secure the drain from underneath the sink by tightening the locking mechanism.
- 조정하다: Make any necessary adjustments to ensure a proper seal and alignment.

그림 4: Visual guide for the 'Drop & Lock' drain installation, illustrating the three simple steps for quick setup.
For detailed faucet body installation, refer to the separate installation guide provided with your product packaging.
작동 지침
The Project Source faucet features a two-handle design for precise control over water temperature and flow.
물 흐름 및 온도 제어:
- The left handle controls the hot water supply. Turn the handle counter-clockwise to increase hot water flow.
- The right handle controls the cold water supply. Turn the handle counter-clockwise to increase cold water flow.
- 원하는 물의 온도와 흐름 속도를 얻으려면 두 개의 핸들을 동시에 조절하세요.
- To turn off the water, rotate both handles clockwise until the flow stops completely.
유지
Regular cleaning and maintenance will help preserve the finish and functionality of your Project Source faucet.
수도꼭지 청소:
- 크롬 표면은 부드러운 천으로 닦으십시오.amp 옷감.
- Use mild soap and water if necessary. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- Wipe dry with a soft cloth to prevent water spots and maintain shine.
에어레이터 유지관리:
- If water flow decreases or becomes irregular, the aerator may be clogged.
- 에어레이터를 주둥이 끝에서 조심스럽게 돌려서 빼내세요.
- 에어레이터 스크린을 흐르는 물에 헹궈 이물질을 제거하십시오.
- 에어레이터를 다시 조립하고 꼭지에 다시 나사로 고정합니다.
문제 해결
If you encounter any issues with your faucet, refer to the following common troubleshooting tips:
- 낮은 물 흐름: Check if the aerator is clogged (see Maintenance section). Ensure water supply valves are fully open.
- 주둥이에서 누수: Turn off water supply. Check for loose connections or worn washers/gaskets within the faucet body. Consult a professional plumber if the issue persists.
- Leaking from Handles: Tighten handle screws. If leaking continues, the cartridge may need replacement.
- 온수/냉수 안 나옴: Verify that the hot/cold water supply lines are connected correctly and the corresponding shut-off valves are open.
For more complex issues or if troubleshooting steps do not resolve the problem, contact Project Source customer support or a qualified plumber.
명세서
| 기인하다 | 세부 사항 |
|---|---|
| 상표 | 프로젝트 소스 |
| 제품의 권장 용도 | 화장실 |
| 장착 유형 | 데크 마운트 |
| 마무리 유형 | 크롬 |
| 재료 | 금속 |
| 색상 | 크롬 |
| 핸들 수 | 2 |
| 포함된 구성 요소 | Drain, Handle |
| 홀 카운트 | 3 |
| 설치 유형 | 센터셋 |
| 워터센스 인증 | Yes (Max flow rate 1.2 GPM) |
보증 및 지원
Project Source products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product packaging or visit the official Project Source website. For technical support, replacement parts, or any other inquiries, please contact Project Source customer service.





