소개
The Behringer UMC22 is an ultra-compact 2x2, 48 kHz USB audio interface designed for recording microphones and instruments. It features a professional-grade Midas-designed mic preamp, a combination XLR/TRS input, and an additional 1/4" instrument input. This interface provides a powerful phones output for direct monitoring, two main outputs, and is USB-powered, making it a portable solution for recording.
주요 특징
- 2x2 USB Audio Interface: Provides two inputs and two outputs for recording and playback.
- Midas가 설계한 마이크 프리앰프amp정수기: Ensures high-quality audio reproduction for microphones.
- 48 kHz Resolution: Delivers professional audio quality.
- 직접 모니터링: Allows musicians to hear their performance with zero-latency.
- USB 전원: Convenient for portable use, no external power supply needed.
- Compatible with Major DAWs: Works with popular recording software like Avid Pro Tools, Ableton Live, and Steinberg Cubase.
- Combination XLR/TRS Input: Accommodates microphones and line-level signals.
- 1/4" 계측기 입력: Dedicated input for connecting guitars or other instruments.
설치 가이드
시스템 요구 사항
- 운영 체제: Windows (Specific driver installation may be required for optimal performance).
- 하드웨어 인터페이스: USB 2.0 포트.
- 호환 장치: 노트북, 개인용 컴퓨터.
Connecting the UMC22
- 컴퓨터에 연결: Use a USB cable to connect the UMC22 to an available USB 2.0 port on your computer. The device is USB-powered.
- 드라이버 설치(필요한 경우): For Windows, visit the Behringer website to download and install the latest ASIO drivers for the UMC22. This ensures low-latency performance with your Digital Audio Workstation (DAW).
- 마이크/악기 연결:
- MIC/LINE 1 Input: Connect a microphone via an XLR cable or a line-level source via a 1/4" TRS cable to the combination jack. If using a condenser microphone, activate +48V phantom power using the switch on the rear panel.
- INST 2 Input: Connect an instrument (e.g., guitar, bass) via a 1/4" TS cable to the dedicated instrument input.
- 헤드폰 연결: Plug your headphones into the 1/4" TRS headphone jack on the front panel.
- Connect Studio Monitors: Use two 1/4" TRS cables to connect the main outputs on the rear panel to your active studio monitors.
영상: Front panel of the Behringer UMC22, showing the combination XLR/TRS input (MIC/LINE 1), 1/4" instrument input (INST 2), Gain 1 and Gain 2 knobs, Direct Monitor button, Output knob, and Headphone jack.
작동 지침
입력 게인 조정
사용하세요 이득 1 그리고 이득 2 knobs on the front panel to adjust the input level for MIC/LINE 1 and INST 2, respectively. Monitor the 클립 그리고 시그 (Signal) LEDs next to each gain knob. The SIG LED indicates an incoming signal, while the CLIP LED warns of signal overload. Adjust the gain to ensure the SIG LED illuminates consistently and the CLIP LED only flashes occasionally during the loudest parts of your performance.
직접 모니터링
를 누르세요 다이렉트 모니터 button to enable zero-latency monitoring of your input signals directly through the UMC22. This allows you to hear your performance without delay, which is crucial for recording. When direct monitoring is active, the computer's sound output may be ducked or bypassed, depending on your DAW settings.
출력 레벨 제어
그만큼 산출 knob controls the overall volume for both the main outputs (to your studio monitors) and the headphone output. Adjust this knob to a comfortable listening level.
Phantom Power (+48V)
The +48V phantom power switch is located on the rear panel. Activate this switch only when using condenser microphones that require phantom power. Ensure the microphone is connected before engaging phantom power to prevent potential damage.
영상: Close-up of the Behringer UMC22 inputs, showing the combination XLR/TRS jack labeled 'MIC/LINE 1' with 'MIDAS PREAMP' and the 1/4" jack labeled 'INST 2'.
영상: Close-up of the Behringer UMC22 controls, highlighting the Gain knobs, Clip/Sig LEDs, Direct Monitor button, and Output knob.
유지
- 기기를 깨끗하고 먼지가 없는 상태로 유지하세요. 청소 시에는 부드럽고 마른 천을 사용하세요.
- Avoid exposing the UMC22 to moisture, extreme temperatures, or direct sunlight.
- c를 열려고 시도하지 마십시오.asing or modify the device, as this will void the warranty and could cause damage.
- 장기간 기기를 사용하지 않을 때는 모든 케이블을 분리하십시오.
문제 해결
- 사운드 출력 없음:
- 모든 케이블 연결(USB, 헤드폰, 모니터)을 확인하세요.
- Ensure the UMC22 is selected as the audio input/output device in your computer's sound settings and DAW.
- Verify that the OUTPUT knob on the UMC22 is turned up.
- Confirm that your studio monitors are powered on and their volume is adjusted.
- 입력 신호 없음:
- 마이크/악기 케이블 연결 상태를 확인하십시오.
- Adjust the GAIN knob for the respective input. Look for the SIG LED to illuminate.
- If using a condenser microphone, ensure +48V phantom power is enabled on the rear panel.
- DAW에서 올바른 입력이 선택되었는지 확인하십시오.
- 높은 지연 시간(레이타임):
- Ensure you have installed the latest ASIO drivers for Windows from the Behringer web대지.
- Enable the DIRECT MONITOR function on the UMC22 for zero-latency monitoring of inputs.
- Adjust the buffer size settings in your DAW to a lower value (note: very low buffer sizes may cause audio dropouts on less powerful systems).
- Distorted Audio (Clipping):
- Reduce the GAIN knob for the input channel where clipping occurs (CLIP LED flashes frequently).
- Ensure the output level is not too high, causing distortion in your headphones or monitors.
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 | 유엠씨22 |
| 연결성 | USB 2.0 |
| 채널 | 2 입력 / 2 출력 |
| 사전amps | 1x Midas-designed Mic Preamp, 1x Xenyx-designed Instrument Preamp |
| 팬텀 파워 | +48V(전환 가능) |
| 해결 | 최대 48kHz |
| 직접 모니터링 | 예 |
| 전원 공급 장치 | USB 버스 전원 |
| 치수(높이 x 너비 x 깊이) | 9.61 x 6.14 x 3.46 인치(대략) |
| 무게 | 약 1파운드 |
| 호환 소프트웨어 | Avid Pro Tools, Ableton Live, Steinberg Cubase, etc. |
보증 및 지원
자세한 보증 정보 및 기술 지원은 베링거 공식 웹사이트를 참조하십시오. web해당 사이트를 방문하거나 고객 서비스에 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
Product support and driver downloads can typically be found on the Behringer support page for the UMC22 model.
