Poulan Pro 18인치 교체용 체인톱 절단 체인(모델 51338) 사용 설명서

1. 서론

This manual provides essential instructions for the safe and effective installation, operation, and maintenance of your Poulan Pro 18-inch Replacement Chain Saw Cutting Chain, Model 51338. Adhering to these guidelines will help ensure optimal performance and extend the life of your chain.

2. 안전 정보

Always prioritize safety when working with chainsaw components. Failure to follow safety precautions can result in serious injury.

• 개인 보호 장비(PPE): Always wear appropriate PPE, including safety glasses, hearing protection, heavy-duty gloves, and sturdy footwear, when handling or installing chainsaw chains.
• 체인톱 준비: Before any installation or maintenance, ensure the chainsaw engine is turned off, cool, and the spark plug cap is disconnected to prevent accidental starting.
• Chainsaw Manual: Refer to your chainsaw's main instruction manual for comprehensive safety guidelines specific to your chainsaw model.
• 날카로운 모서리: Chainsaw chains have sharp cutting edges. Handle with extreme care to avoid cuts.

3. 제품 오버view

The Poulan Pro 18-inch Replacement Chain Saw Cutting Chain is engineered for reliable cutting performance. It features a 3/8-inch pitch and a 0.050-inch gauge, designed to fit various chainsaw models requiring an 18-inch chain with these specifications.

호환 가능한 체인톱 모델: This chain is suitable for use with Poulan, Poulan Pro, Craftsman, Husqvarna, and Jonsered chainsaws, including specific models such as 2155, 2175, 2300, 2375, 2400, 2450, 2500, 2550, 2555, 2600, P260, P-3818AV, 3818WT, 4018WT, 4018AV & 4018AVBH, PPB-1838, 4018 & 4218, PP-4018, 4018WTL, 4218AV, 4218AVX & 4218AVL & SM4218AV.

Image 1: Poulan Pro 18-inch Replacement Chain Saw Cutting Chain in its retail packaging, highlighting the brand, chain length, and compatibility information.

4. 설정 및 설치

Follow these steps to safely install your new replacement chain:

1. 전기톱을 준비하세요: 체인톱 엔진이 꺼져 있고 식었는지 확인하십시오. 오작동으로 인한 시동을 방지하기 위해 점화 플러그 배선을 분리하십시오.
2. 바 커버를 제거하세요: Loosen the bar nuts and carefully remove the side cover that secures the guide bar and chain.
3. 기존 체인을 제거하세요: Carefully remove the old chain from the guide bar and drive sprocket. Observe the direction of the old chain's cutters for correct installation of the new chain.
4. 새 체인 설치: Place the new Poulan Pro chain onto the drive sprocket. Guide the chain around the nose of the guide bar and into the groove along the bar. Ensure the cutting edges of the chain are facing the correct direction (typically forward on the top of the bar).
5. 바 커버 재설치: Position the guide bar correctly and replace the side cover. Hand-tighten the bar nuts initially.
6. 체인 장력 조정: Adjust the chain tensioning screw until the chain is snug against the bottom of the guide bar, but can still be pulled freely by hand. There should be no slack on the underside of the bar. A properly tensioned chain will have the drive links fully seated in the bar groove, and you should be able to pull the chain around the bar with light effort.
7. 최종 조임: While holding the nose of the guide bar up, fully tighten the bar nuts. Recheck chain tension after tightening to ensure it remains correct.
8. 점화 플러그를 다시 연결하세요: 점화 플러그 와이어를 다시 연결하십시오.

5. 사용 설명서

Before each use of your chainsaw with the new chain, perform the following checks:

• 체인 텐션: Verify that the chain tension is correct. An improperly tensioned chain can derail, cause excessive wear, or lead to injury.
• 체인 날카로움: Ensure the chain cutters are sharp. A dull chain requires more effort to cut, increases fuel consumption, and can cause kickback.
• 매끄럽게 하기: Confirm that the chainsaw's automatic oiling system is functioning and the oil reservoir is filled with appropriate bar and chain oil. Proper lubrication is crucial for chain and bar longevity.
• Chainsaw Operation: Always operate the chainsaw according to its manufacturer's instructions and safety guidelines.

6. 유지관리

Regular maintenance is essential for the performance and safety of your chainsaw chain.

• 날카롭게 하기: Regularly sharpen the chain cutters to maintain optimal cutting performance and safety. Refer to your chainsaw's manual or consult a professional for specific sharpening angles and tools.
• 청소: After each use, clean debris, sawdust, and resin from the chain, guide bar groove, and sprocket area. This prevents buildup that can impede chain movement and lubrication.
• 매끄럽게 하기: Continuously monitor the chainsaw's automatic oiler to ensure it is delivering sufficient oil to the chain and guide bar. Keep the oil reservoir filled with quality bar and chain oil.
• 점검: Periodically inspect the chain for stretched links, cracks, broken rivets, or other signs of damage. Also, check the guide bar for burrs or uneven wear. Replace the chain if any significant damage is found, as a damaged chain can be dangerous.

7. 문제 해결

Addressing common issues related to your chainsaw chain:

• 체인이 효율적으로 절단되지 않음: This is often due to a dull chain. Check chain sharpness and sharpen if necessary. Also, verify correct chain tension and ensure the cutters are facing the proper direction.
• Chain smoking or overheating: Insufficient lubrication or incorrect chain tension can cause this. Verify proper chain lubrication and tension. A dull chain can also generate excessive heat.
• Chain coming off the bar: This issue is frequently caused by incorrect chain tension (too loose) or a worn guide bar/sprocket. Ensure the chain is tensioned correctly and inspect the guide bar and sprocket for wear or damage.
• 과도한 진동 : An unbalanced or damaged chain, or a dull chain, can cause excessive vibration. Inspect the chain for damage and ensure it is sharp and properly tensioned.

8. 사양

9. 보증 및 지원

For specific warranty information regarding your Poulan Pro 18-inch Replacement Chain Saw Cutting Chain, please refer to the documentation included with your purchase or visit the official Poulan Pro web사이트. 보증 청구에 대비해 구매 증빙 자료로 구매 영수증을 보관하세요.

For additional support or inquiries, you may contact Poulan Pro customer service directly or visit their official brand store: Poulan Pro Store.