1. 서론
This manual provides essential information for the proper installation, operation, and maintenance of the FURUNO FUR-IF-NMEA2K2 NMEA 0183 to NMEA 2000 Converter. This device facilitates bidirectional data conversion between NMEA 0183 and NMEA 2000 CAN bus systems, offering selectable high-speed modes for specific data types like heading and AIS.
안전하고 효율적인 작동을 위해 제품을 사용하기 전에 이 설명서를 자세히 읽어주세요.
2. 안전 정보
Always observe the following precautions to prevent injury and damage to the equipment.
- 설치나 유지관리를 하기 전에 전원이 꺼져 있는지 확인하세요.
- 제품을 극한 온도나 장시간 직사광선에 노출시키지 마십시오.
- Consult a qualified technician for any repairs beyond basic troubleshooting.
- Use only specified power sources and cables.
3. 설정 및 설치
The FUR-IF-NMEA2K2 converter is designed for straightforward integration into existing marine electronic systems. Proper installation is crucial for optimal performance.
3.1 풀기 및 검사
Upon receiving the unit, carefully unpack it and inspect for any signs of damage. Ensure all components are present.
3.2 설치 위치
Select a mounting location that is dry, protected from direct weather exposure, and allows for adequate ventilation. Avoid areas with high vibration or electromagnetic interference.
3.3 배선 연결
The converter features connections for both NMEA 0183 and NMEA 2000 networks. Refer to the diagram below for proper wiring.
Figure 1: FURUNO FUR-IF-NMEA2K2 NMEA Data Converter. The image displays the converter unit with a circular NMEA 2000 connector on one end and multiple color-coded bare wires for NMEA 0183 connections on the other. The main body of the converter is black with a label indicating "NMEA DATA CONVERTER", "TYPE IF-NMEA2K2", "SER.NO. 001866", and options for "NORMAL" or "HIGH SPEED (CUT ORANGE)" operation.
3.3.1 NMEA 2000 연결
Connect the circular NMEA 2000 connector to your vessel's NMEA 2000 backbone. Ensure a secure, watertight connection.
3.3.2 NMEA 0183 연결
The bare wires are for NMEA 0183 input and output. Refer to your NMEA 0183 device's manual for specific wiring requirements. Common connections include:
- Data In (Rx): Connect to the NMEA 0183 Talker's Output (Tx).
- Data Out (Tx): Connect to the NMEA 0183 Listener's Input (Rx).
- 지면: Connect to the common ground of the NMEA 0183 system.
3.4 High-Speed Mode Selection
The converter supports a high-speed mode for specific data types. To enable high-speed mode (e.g., for heading and AIS data), locate the orange wire and follow the instructions on the converter's label. Typically, this involves cutting or connecting the orange wire as indicated for "HIGH SPEED (CUT ORANGE)" or "NORMAL" operation.
메모: Incorrect selection may lead to data transmission errors. Consult your system's requirements before altering this setting.
4. 사용 설명서
Once properly installed and powered, the FUR-IF-NMEA2K2 converter operates automatically, translating data between the connected NMEA 0183 and NMEA 2000 networks.
4.1 전원 켜기
Ensure all connections are secure. Apply power to the NMEA 2000 network. The converter will power on automatically as it draws power from the NMEA 2000 bus.
4.2 Data Flow
The converter transparently translates NMEA 0183 sentences to NMEA 2000 PGNs (Parameter Group Numbers) and vice-versa. Verify data reception on your connected NMEA 0183 and NMEA 2000 devices.
- NMEA 0183 to NMEA 2000: Data from NMEA 0183 talkers connected to the converter's input will be broadcast on the NMEA 2000 network.
- NMEA 2000 to NMEA 0183: Relevant NMEA 2000 PGNs will be converted into NMEA 0183 sentences and output via the converter's NMEA 0183 output wires.
5. 유지관리
The FUR-IF-NMEA2K2 converter is designed for minimal maintenance. Regular checks can help ensure long-term reliability.
- 정기 검사: Annually inspect all cable connections for corrosion or damage. Ensure connections are tight.
- 청소: If necessary, gently wipe the unit with a soft, damp 옷감. 강한 화학 물질이나 연마성 세제를 사용하지 마십시오.
- 소프트웨어 업데이트: Check the FURUNO website periodically for any firmware updates for the converter. Follow specific instructions provided with any updates.
6. 문제 해결
If you experience issues with the converter, refer to the following troubleshooting guide before contacting support.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| No data on NMEA 2000 network from NMEA 0183 device. |
|
|
| No data on NMEA 0183 device from NMEA 2000 network. |
|
|
| 간헐적인 데이터 손실. |
|
|
7. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 | FUR-IF-NMEA2K2 |
| 기능 | NMEA 0183 to NMEA 2000 Converter (Bidirectional) |
| NMEA 0183 Ports | Input/Output (bare wire connections) |
| NMEA 2000 포트 | 1 (standard NMEA 2000 connector) |
| 전원 공급 장치 | Powered via NMEA 2000 network |
| 고속 모드 | Selectable (e.g., for Heading, AIS data) |
| 제조업체 | 후루노 |
8. 지원 및 보증
For technical assistance or warranty inquiries, please contact FURUNO customer support. Refer to the official FURUNO web최신 연락처 정보 및 보증 정책 세부 정보는 해당 사이트를 참조하십시오.
후루노 Web대지: www.furuno.com
