소개
This manual provides essential information for the safe and effective operation of your Icom R6 Sport Wide Band Handheld Communications Receiver. Please read this manual thoroughly before using the receiver to ensure proper functionality and to prevent damage.
The Icom R6 Sport is a versatile and compact receiver designed for wideband frequency coverage, offering superior sensitivity and resistance to interference. It is capable of receiving a broad range of communications, including amateur radio, AM/FM broadcasts, shortwave, and various utility signals.
앞쪽 view of the Icom R6 Sport Wide Band Handheld Communications Receiver, showing the display, control buttons, and antenna. The screen displays '1309.995 FM'. Below the screen are control buttons labeled 'BAND', 'TS SET', 'MODE SCAN', and 'V/M S.MW SKIP', along with navigation arrows and a power button.
주요 특징
- Wideband Coverage: Receives frequencies from 100kHz to 1309.995MHz.
- 광범위한 메모리: 1300 alphanumeric memory channels with 22 memory banks.
- 고속 스캐닝: Capable of scanning up to 100 channels per second.
- Voice Squelch Control (VSC): Opens squelch only for modulated signals, ignoring unmodulated noise.
- 시끄러운 오디오: 150mW audio output with internal speaker.
- Automatic LCD Backlight: 다양한 조명 조건에서 시인성을 향상시킵니다.
- Priority Watch Function: Monitors a priority channel while scanning.
설정
1. 배터리 설치
The Icom R6 requires two (2) AA alkaline batteries. Ensure correct polarity when inserting the batteries into the compartment located on the rear of the unit. Close the battery cover securely.
2. 안테나 부착
Screw the supplied antenna (FA-S270C) clockwise onto the antenna connector at the top of the receiver until it is finger-tight. Do not overtighten.
3. 초기 전원 켜기
를 누르고 계세요 힘 button (labeled with a circle and vertical line) located on the front panel to turn the unit on. The LCD backlight will illuminate, and the display will show the current frequency.
작동 지침
1. 주파수 튜닝
Use the large rotary knob at the top of the unit to adjust the frequency. Alternatively, use the Up 그리고 아래에 arrow buttons on the front panel for step-by-step tuning.
2. 모드 선택
를 누르세요 MODE SCAN button to cycle through available reception modes (e.g., FM, AM). The current mode is displayed on the LCD.
3. 스캐닝 기능
The R6 offers various scanning capabilities:
- VFO 스캔: Scans continuously within the selected frequency range.
- 메모리 스캔: 프로그래밍된 메모리 채널을 스캔합니다.
- Bank Link Scan: Allows scanning of selected memory banks.
To initiate a scan, press the MODE SCAN button until 'SCAN' appears, or refer to the detailed instructions in the full manual for specific scan types.
4. 메모리 채널 프로그래밍
The receiver has 1300 alphanumeric memory channels. Programming can be complex via the front panel. It is highly recommended to use optional PC programming software and a cable for easier management of memory channels and settings. Consult the full manual for manual programming steps.
5. Voice Squelch Control (VSC)
The VSC function automatically opens the squelch only when a modulated signal is detected, effectively reducing noise from unmodulated beat signals. This is particularly useful when scanning for voice communications.
유지
1. 배터리 교체
When the battery indicator on the LCD shows low power, replace both AA batteries promptly to ensure continuous operation. Always use fresh, high-quality alkaline batteries.
2. 청소
Wipe the receiver's exterior with a soft, dry cloth. For stubborn dirt, use a cloth lightly dampened with water and a mild detergent, then wipe dry. Do not use strong chemicals or abrasive cleaners.
3. 보관
If storing the unit for an extended period, remove the batteries to prevent leakage and corrosion. Store the receiver in a cool, dry place away from direct sunlight and extreme temperatures.
4. 방수성
The Icom R6 Sport is water resistant. However, it is not waterproof. Avoid submerging the unit in water or exposing it to heavy rain. Ensure all covers and ports are securely closed to maintain water resistance.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 장치의 전원이 켜지지 않습니다. | 배터리가 방전되었거나 잘못 설치되었습니다. | 배터리를 새 배터리로 교체할 때 극성을 반드시 확인하십시오. |
| 수신이 안 되거나 신호가 약합니다. | Antenna not properly attached; out of range; local interference. | Check antenna connection. Move to an area with better signal. Adjust squelch level. |
| Difficulty programming frequencies. | Complex manual programming interface. | 구매를 고려하세요asing third-party PC programming software and a compatible cable for easier programming. |
| 오디오가 왜곡되거나 너무 낮습니다. | Volume too low; poor signal quality; internal speaker issue. | Adjust volume knob. Ensure strong signal. If problem persists, contact service. |
명세서
| 특징 | 사양 |
|---|---|
| 모델 번호 | IC-R6 Sport |
| RX 주파수 | 100kHz - 1309.995MHz |
| 채널 수 | 1300 (with 22 memory banks) |
| 전원 | 3 Volts (2 x AA alkaline batteries) |
| 오디오 출력 | 150mW (internal speaker) |
| 품목 무게 | 14.4 온스 |
| 패키지 크기 | 8.62 x 6.57 x 2.95 인치 |
| 색상 | 검은색 |
| 튜너 기술 | 초고주파 |
| 방수 레벨 | 방수 |
| 포함된 구성 요소 | Antenna (FA-S270C), Belt clip, Hand strap |
보증 및 지원
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official ICOM web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
If you encounter issues not covered in this manual or require service, please contact ICOM customer support or an authorized service center.
