스타테크 ICUSBAUDIO2D

StarTech.com USB Sound Card User Manual

브랜드: 스타테크

Model: ICUSBAUDIO2D

제품 끝view

The StarTech.com ICUSBAUDIO2D External USB Sound Card provides a convenient solution to add S/PDIF digital audio output and standard 3.5mm analog audio/microphone connections to your system via USB. This device allows you to bypass or replace an internal sound card without needing to open your computer case. It supports high-quality audio with 96kHz / 24-bit sampling rates for both playback and recording, and includes a 3.5mm S/PDIF port with support for Dolby Digital 5.1 Surround Sound (AC3) and DTS Pass-through (Windows only). The adapter also features an integrated 3.5mm 4-position TRRS connection for headphones or combination headset/microphone, an external volume control, a hardware EQ switch for bass or treble boosting, and an LED status bar to display the current samp링율.

StarTech.com USB Sound Card with SPDIF Digital Audio and Stereo Mic

그림 1: 전면 view of the StarTech.com USB Sound Card (ICUSBAUDIO2D), showing the USB cable, main unit with volume knob, headphone and microphone jacks, and LED indicators.

설정 및 설치

This external USB sound card is designed for easy plug-and-play installation on most modern operating systems, including Windows and Mac OS X. Drivers are typically installed automatically upon connection.

장치 연결

  1. 컴퓨터에 연결: Plug the USB connector of the sound card into an available USB port on your computer (laptop or desktop PC).
  2. Close-up of the USB connector of the sound card

    그림 2: 클로즈업 view of the USB connector, ready for connection to a computer's USB port.

  3. 오디오 출력 연결:
    • For digital audio, connect an S/PDIF cable (not included) from the S/PDIF Line-Out port on the sound card to your digital audio receiver or speakers.
    • For analog audio, connect your headphones or speakers to the 3.5mm headphone jack (marked with a headphone icon).
  4. 마이크 연결 (선택 사항): If using a separate microphone, connect it to the 3.5mm microphone jack (marked with a microphone icon). If using a 4-position TRRS headset (combined headphone/mic), plug it into the 3.5mm headphone jack.
  5. 뒤쪽 view of the StarTech.com USB Sound Card showing SPDIF port and EQ switch

    그림 3: 후면 view of the sound card, highlighting the S/PDIF Line-Out port and the Bass/Direct/Treble EQ switch.

  6. 드라이버 설치: The operating system should automatically detect and install the necessary drivers. Verify installation in your system's Device Manager (Windows) or System Information (Mac).

작동 지침

Audio Playback and Recording

유지

To ensure the longevity and optimal performance of your StarTech.com USB Sound Card, follow these maintenance guidelines:

문제 해결

If you encounter issues with your StarTech.com USB Sound Card, refer to the following common troubleshooting steps:

문제해결책
소리가 출력되지 않습니다.
  • Ensure the USB sound card is securely connected to a working USB port.
  • 운영체제의 사운드 설정에서 사운드 카드가 기본 재생 장치로 선택되어 있는지 확인하십시오.
  • Check the volume knob on the sound card and your system's volume levels.
  • Ensure speakers/headphones are properly connected and powered on.
Hissing or static noise.
  • Try lowering the volume control dial on the sound card.
  • Ensure all audio cables are fully inserted and not damaged.
  • Test with different headphones/speakers to rule out external equipment issues.
  • USB 포트에 충분한 전력이 공급되는지 확인하십시오. 다른 USB 포트를 사용해 보세요.
Bass sounds muddy or distorted.
  • Check the EQ switch on the rear of the unit. If it's set to "Bass", try switching it to "Direct" mode.
  • Adjust equalizer settings in your computer's audio software, if applicable.
5.1 Surround Sound (AC3/DTS) not working.
  • Ensure your operating system is Windows, as 5.1 surround sound is supported in Windows only.
  • Verify that your media player software (e.g., VLC) is configured to output via S/PDIF and pass through AC3/DTS. For VLC, navigate to Tools > Preferences > Audio > Output module and select "DirectX audio output", then check "Use S/PDIF when available".
  • Confirm your audio receiver/speakers support AC3/DTS decoding.
Microphone input is too quiet.
  • 마이크 조정 amplification slider in your operating system's sound settings (e.g., Windows Sound Control Panel or Mac Audio MIDI Setup).
  • Ensure your microphone is properly connected and functioning.

명세서

특징세부 사항
제품 치수1.9 x 1.8 x 0.6 인치
품목 무게1.16 온스
모델 번호IUSBAUDIO2D
호환 장치개인용 컴퓨터
하드웨어 인터페이스USB
오디오 출력 모드2.1 (Stereo), 5.1 (via S/PDIF on Windows)
지원 플랫폼윈도우, 맥 OS X
Samp링 요금Up to 96kHz / 24-bit

보증 및 지원

The StarTech.com USB Sound Card (ICUSBAUDIO2D) is backed by a StarTech.com 2-year warranty and free lifetime technical support.

For further assistance or detailed documentation, please refer to the official user guide:

사용자 가이드 다운로드(PDF)

관련 문서 - IUSBAUDIO2D

사전view StarTech.com ICUSBAUDIO2D 스테레오 오디오 USB 외부 사운드 카드(SPDIF 디지털 오디오 지원) - 사용 설명서
StarTech.com ICUSBAUDIO2D USB 스테레오 오디오 어댑터 사용 설명서입니다. 이 설명서에는 제품의 기능, 설치, 검증, 기술 지원 및 보증 정보가 자세히 나와 있습니다. 이 외장형 사운드 카드는 USB를 통해 SPDIF 디지털 오디오와 표준 3.5mm 오디오/마이크 연결을 제공합니다.
사전view StarTech.com 7.1채널 USB 외장 사운드 카드 | SPDIF 디지털 오디오 사용 설명서
StarTech.com 7.1 채널 USB 외장 사운드 카드(SPDIF 디지털 오디오 지원, 제품 코드: ICUSBAUDIO7D) 사용 설명서입니다. 설치, 연결, 작동, 제품 구성도 및 보증에 대한 자세한 정보를 제공합니다.
사전view StarTech.com 7.1채널 USB 외장 사운드 카드 | SPDIF 디지털 오디오 사용 설명서
StarTech.com 7.1채널 USB 외장 사운드 카드(SPDIF 디지털 오디오 지원) 사용 설명서입니다. 제품 구성도, 설치 지침, 시스템 요구 사항 및 보증 정보가 포함되어 있습니다.
사전view StarTech.com BT52A Bluetooth Audio Receiver with NFC - 3.5mm Jack/RCA/SPDIF
StarTech.com BT52A: A Bluetooth 5.0 audio receiver with NFC, HiFi Wolfson DAC, and multiple outputs (3.5mm, RCA, Optical) for high-quality wireless stereo audio streaming to home stereos, PCs, or TVs.
사전view StarTech.com AV53C1-USB-BLUETOOTH USB 블루투스 5.3 어댑터 빠른 시작 가이드
StarTech.com AV53C1-USB-BLUETOOTH USB 블루투스 5.3 어댑터 빠른 시작 가이드입니다. 이 장거리 Class 1 어댑터의 요구 사항, 설치, 기능 및 패키지 구성품에 대해 알아보세요.
사전view StarTech.com KVM-USB 2.0 노트북 크래시 카트 어댑터 빠른 시작 가이드
StarTech.com NOTECONS01 KVM-USB 2.0 노트북 비상용 카트 어댑터의 빠른 시작 가이드입니다. Windows 및 macOS 설치, 하드웨어 설정, 보증 정보를 자세히 설명합니다.